Stainless Steel Backsplash, 30" X 23.25" with Hemmed Edges

Easy to glue up. Looks great. Does what it is supposed to do. Wipes clean. Gives the area a nice, finished look.

Good quality, well made, sturdy/heavy gouge backsplash. Packaging could have been a little sturdier as upon receipt the cardboard was punctured/ripped in several places, wood packaging frame was split in half in one place and PVC protective film was abraded through in a half dozen locations. Backsplash itself survived without damage in spite of the packaging and handling.With a little planning and forethought, mounting was fairly straight forward and easy. A dry fit was performed to insure proper fit and a couple of 4x1's cut to the appropriate lengths were taped in place against the wall below the backsplash to support its weight. An even perimeter bead of Liquid Nails about an inch from the edges and a serpentine bead over rest of the back of the backsplash was applied and after placing and adjusting the backsplash some additional masking tape and a couple of supports were wedged with light pressure between the back of the range and backsplash to keep the backsplash from tipping away and flush against the wall while the adhesive set. This technique worked very well and provided great results.

First off, this stainless steel backsplash was so well packaged that I can't imagine how it would get damaged during shipping ( a plywood frame fit over all edges ). Additionally, the backsplash is very well constructed (with the finished edges) and has a high quality look to it. . It fit perfectly between the quartz pieces that were spaced at 30 1/16 inches.

Size was exact. Arrived in great shape packaged well. I drilled holes and mounted with screws. Looks great and matched well with the stainless accents on my stove.

It was installed as a backsplash for a kitchen range.

These were installed in a vacation home. The quality of the stainless is excellent. I was a bit unsure about the rolled edges, but am very happy with the finished look. Lots of discussion on here about if and which products will support magnets. You can clearly see these do! I purchased both liquid glue suggested on the web page and double stick tape. My walls weren't straight so I was happy to have the tape and used it layered in the corner to counter the crooked wall. I used both glue and tape to mount. They've been up for a few months now and remain firmly attached. Be careful when removing the film, it is firmly attached, just go slow and be patient. This project turned out exactly as I hoped. Thanks to everyone who offered up advice, opinions and experience. All the information was very helpful!

Didn't hv any issues with scratches or blemishes. I kept the protective cover on it while installing. Then after the glue set, removed it.

The item arrived extremely well packaged and in pristine condition. I mounted it with construction adhesive as instructed so there are no screws or other hardware showing. It matches the SS appliances perfectly. Please note: a magnet will stick to it. Also before mounting it take the protective plastic off around the edges. Once mounted the stuff is very difficult to remove. Leave the rest of the protective plastic in place until the adhesive is fully cured.