Musiclily12x17 Inch Uncut Guitar Bass Pickguard Material Blank Scratch Plate for Fender Stratocaster Telecaster Custom, Red Tortoise

This was exactly what I needed for my project. It came together with this to craft a custom cover-plate for the Harmony Bobkat I was rebuilding.If you have a template, tis is really nice material!

Yes the size is in the fine print though I missed that. So while waiting to receive the part I went ahead and made a pick guard jig that was just shy of 12“. Imaging my disappointment when I found out it’s true dimensions. Otherwise there aren’t any issues with the laminated plastic I received, super shiny black and the white in between is nice and white.

There was a mixup on delivery time but they cleared it upGreat product affordable price

I agree with Roger's review below... the ivory has a greenish tint, regardless of the lighting. It doesn't look bad, just green. Luckily this material will probably work for my project.

This was for a pickguard cut out for a strat shaped bass. Two pickup cutouts, some tight radii around the neck and 6 holes for pots and switches. Then the holes were drilled for the pickguard screws –about 1/4” from the edges. It was a chore, but the cuts were clean and the material stayed intact.I used the Dremel Rotary cutter at low speed and a coping saw blade when things were a straighter cut. If it’s your first time, try it on similar material or use a portion that isn’t on your finished line –for practice. Things can go terribly wrong when the dremel walks or chatters. This can be controlled with technique, but it requires practice. Also a drill bit can get a bit too aggressive on this material near the edge and cause breakout. Plastic bits or a glass spade bit are nice to have and cut without grabbing the material. A Unibit also works well.There was no chipping of the top layer and the finished product looks as good as anything coming out of a guitar factory these days. Compared to a Sterling or Ibanez pickguard, it’s on par. I got tortoise and pearl green. Both are very typical of the popular instrument wrap on higher end drums or plastic pickguard material. This plastic doesn’t present like a cheap knockoff. Top layer is pretty thin, but it isn’t just a decal. It’s a plastic layer of durable material with depth and a pearl look to it. It was a GOOD BUY... ok, Good bye

Do not leave in direct sunlight, it will warp.Used this to make electronics cover for a bass.After cutting the shape I left it sitting on my bandsaw table for a few hours. When I came back to get it, the sunlight coming through the window had badly warped the material. No big problem.There was plenty of material to cut it again.I know it was my fault, just be advised and don't make the same mistake I did.High quality material. Cuts and sands easily.

I wanted a 1 ply black pickguard sheet to glue on the bottom of a wbw 3 ply pickguard sheet to make a 4 ply wbwb pickguard, because wbwb 4 ply is literally nowhere for purchase. This single ply black pickguard sheet is 2.2mm thick, identical to the wbw 3 ply sheet I bought. Stewmac sells the thinner ply sheets that are the same thickness as the middle black ply. This thicker pickguard sheet would work great for a Les Paul Junior pickguard.

This material is great to work with. I traced the old pickguard on the new material and cut out with a rotary dental handpiece with a long tapered bit. It's like a $1,500 dremmel on steroids, but I'm sure a dremmel would work if you can hold it right. Then roughly beveled the edges with a larger grinding bit. I used 400 grit sandpaper to easily smooth the edges and finished with 1500. I drilled the holes with a countersink bit for the screw heads. Material cut and finished easily with no layers coming apart or any problems. I saw videos of people cutting wood pickguard shapes to then attach this material to cut out with a router. Seems like overkill if you have any ability to work with the right hand tools and can use sandpaper to shape the edges. I'm very pleased with this material.

Placa muy bonita. Para construir un pickguard de una yamaha 112 V, el cual no logré conseguir ya fabricado. Compré otra en color marfil. También muy bonita, pero la bolsa de empaque estaba visiblemente rota y por ello la placa estaba algo sucia. Además está algo rayada. Me quedé con ella por la urgencia con que la necesitaba. Sin embargo creo que, cuando se selecciona un producto para envío desde la bodega de Amazon, debería descartarse enviar material dañado. Quien elige en la bodega debe pensar en enviar algo como si fuera para él. No estamos comprando saldos ni stock B.

It came quickly, was packaged properly and should allow me to get 2 tele-style pick guards from 1 sheet.

Me encuentro reparando una vieja guitarra First Act, el modelo está descontinuado y encontrar piezas como el pickguard es muy difícil, ya que la forma no se encuentra en otros modelos. La lámina de celuloide es lo suficiente grande como para recortar dos piezas, además de que el color y el acabado del plástico es lo que buscaba. El celuloide es de tres capas, como el original, y viene protegido por una pantalla adhesiva que una vez que se termina el trabajo, se puede retirar.

Top quality, fast delivery. Keep up the great work guys.

Buen producto, gracias