3D POXY Montan Wax Sealant – Long Lasting Hybrid Car Wax for High Gloss Finish & Paint Protection | Non-Staining Formula | Easy to Apply | Made in USA | 16 oz

I saw several positive reviews online regarding this product and opted to give it a try. As with most waxes, your car's paint must be in good condition for this product to stand out. I did some minor detail work on my car's paint and then applied this wax evenly by hand with minimal effort. I let the product sit for roughly thirty minutes and then wiped it off with a micro fiber towel. It took minimal effort to remove and the shine was fantastic. I've applied this wax to a couple of my cars that have darker colored paint jobs and they now have that deep shine appearance. I would definitely recommend this wax sealant and I will be buying another bottle soon.

Easy on, easy off. Great topper for coatings. Makes the Raptor shine

I wanted a synthetic wax that would not leave white stains on black trim nor white powdery residue everywhere. This wax went on easily and very sparingly and comes off cleanly. I will say if hot and in the sun, it may take a bit more elbow grease to remove it, so try doing this on an overcast day or in the shade. I did find it loves to bond with glass and left a bit of circular streaks. I used Rainex spray glass cleaner (with Rainex rain protection built in) to clean these visible swirls off the glass easily. Also, if in high heat and sun, any residue of this wax in tight crevices hardens faster then in cooler conditions and is a bit more stubborn to remove. Again, shade or a cooler day will make this job go easier. The finish is amongst the smoothest I've ever seen in several synthetic brands I've used. It feels more like a seal-coat then a wax. The paint feels very slick and slippery. As for durability, to be determined and I'll update this review accordingly for resistance to washes and general wear and tear in the elements and also for tree sap and general protection against anything sticking to the paint, especially in the hood and roof areas. But, in applying/buffing and removing this and the end result I see and feel, I'm giving it 5 stars at this point for the best synthetic wax I have used in the last 5+ years.

i have detailed cars as a hobby and side business for many years. i have used megs21 for a long time with megs26 on top, recently tried the poxy on my wifes car. i found 1 coat beats the 2 others hands down. the shine and beading is phenomenal from a sealant. the only down side is the cure time. but if you factor the time it would take for 2 coats vs 1 coat of poxy + cure time. its about the same with less energy. i apply using a da and 100 ppi foam pad and removed with a 600 gsm microfiber . it went on quick and almost invisible. wiped off with ease even in the ft lauderdale mid day heat. i actually wasnt sure it was even on the car from how easy and invisible it was. until i ran the back of my hand on the entire car i could feel the smoothness and see the depth. something not many sealant give off by the way. the next day lawn guys blew grass all over my car and i sprayed off with the hose. the beads were so nice ! as of right now this is my go to sealant . if it comes close to lasting 4 months i will come back and give it 5 stars

I’ve tried the top waxes and paint sealers from several different manufacturers recently, but the 3D POXY Montan is by far the best. It’s super easy to apply, and dust-free removal makes the whole process effortless, takes only a little longer than a quick detail spray, so it’s a breeze to work with. At first, it might not feel that slick, but once it cures, it leaves a smooth, high-gloss finish that’s both durable and impressive. The microfiber applicator and polishing cloths can be cleaned with water and reused, just be sure rinse them before they dry. Tip: Let the product fully cure before getting the car wet. I grabbed the 16-ounce bottle, used about half on an Explorer and an Edge, and still have plenty for one more round on both cars. Will definitely buy again!

Applied today for the first time. It leaves a very shiny, glossy finish. Very easy to apply and remove.

This product is easy to use, doesn’t gunk up the black plastic trim, and really makes a paid job pop. I didn’t buy it for long-term durability, I reapply it more frequently than most, so I can’t speak on how long it holds up. This is my new go to, it works great.

Goes on easy comes off easy if you follow the directions. Last a long time when applying twice.

one of the best waxes i have used over the years, easy application and removal, and leaves a very durable wax coating which produces a very nice shine even after several washes along with a very good protection. A bit more expensive than some others, but well worth the money.

Ottimo direi

I purchased this 3D Poxy as a topper for the 3D Speed (reviewed under 3D Speed) that I used last weekend. I used my cordless Dual Action Polisher with the sealant and polishing pad and did a single cross hatch patter on the lowest speed to apply this sealant, waited 15 minutes before buffing with a microfiber cloth to a very high gloss finish. I really like the that it can be applied to all exterior hard surfaces including the plastic moldings on the bottoms of the doors and bumpers without leaving a horrible white film behind. This sealant gives a very nice wet look to all the surfaces and really makes the metallic paint sparkle. This sealant can be applied either by machine polisher or by hand and gives the same results either way. I used the machine and was able to complete the entire procedure on my entire Chevrolet Equinox LT in approximately 20 minutes (after a 2 step wash and dry). I have used some silicon based sealants in the past and found them a pain to buff off without leaving streaks or high spots that then required a damp microfiber cloth to level, this extra process increased the time by an additional 15 minutes or sometimes longer. I wash my car every week due to going to our trailer every weekend and the roads are either dry gravel or dirt roads, this leaves the SUV very dirty. I like this sealant for its ease of use, fast application, smells like fruit, and the quality of finish. Hope this helps some of you.

هو جيد ولكن ماتطول المعه

gutes Produkt