1X 126W 20" Led Light Bar Flood Spot Combo Off Road Light Bar with 4X18W Flood LED Pods for Off-Road Vehicle, ATV, SUV, UTV, 4WD, Jeeps, Boat

I recently purchased these lights to attach to my tractor- I have a mini farm, much acreage and tend to work until dusk- I retracted the roll bar, attached large “L brackets” to the roll bar, and installed the lights to the brackets- wiring the lights to the tractor was easy- also installed a toggle switch- when I flipped the toggle switch to the on position, I was absolutely shocked at the power and brightness of these lights!!! My neighbor saw me driving around that night, and has ordered a set of these lights for his Kioti Mechron- I will also be ordering two additional sets of these lights for my other tractor and Ferris zero turn mower- in closing, I would HIGHLY RECOMMEND these lights for any type of vehicle or machinery- the value, both monetary and quality is unsurpassed!!!

The install for this was actually pretty easy for me. I already had pre-existing off road flood lights and these wired into the same exact positive and negatives already installed. They're very bright, water proof so far (it has rained heavily and hasn't shorted anything), and I like the ease of installing the housing for the lights as well. They're adjustable with four tension screws. The install for them is a common sense install because they do not come with instructions... so if you are trying to wire these into your jeep and need to install a switch to activate then I'd recommend getting a pro to install it. Probably best buy would be your best option in that case.

I have had the lights on my 4wheeler for a while now and have had great success with them even while submerged. They have great impact resistance while being bashed by brush on the trails and even after going through creeks no water has gotten into the lights. Other brands claim to be water proof but they are no match for these. I would highly recommend these to anyone. Very bright and priced just right.

They are bright and easy to install. The casing on mine is cracked on both lights. I needed to install anyways so I could use them on some trips I needed them for asap. I am hoping customer service can help me get this taken care of. I will update my review as to if the company sends me some new ones to give another review or update. The wiring harness was high quality and installed easily. I really like the stick on switch for ease of use.

Bought the lights as I do a fair bit of class VI roads up in northern NH and ME. The 96watt lights are mounted to my bumper and throw a pretty solid amount of light. The light is not "spot like" as I thought it would be and if I turn my high beams on they tend to reach just a tad farther right in the center. Don't let that statement miss lead you though...they are much brighter than normal headlights and throw light out to both sides as well as vertically. I have them paired with some 45w side shooter light pods mounted as ditch lights. That combo is more than enough light. The pictures show, lows, highs, and then the lumitek, then the lumitek and the ditch lights. Im happy with the setup...things to note.all the bolts they come with will rust.The brackets were not 100% straight.the one bolt for attaching the light was not enough for me....but there are extra slots in the bracket so I added 2 more per light.the stickers fall off.the plastic cover is loose (fixed with a piece of tape) so it won't rattle.these are not $800 ARB intensity lights. They are the direct knock off though...they work for me...but don't expect $800 quality.

Fantastic lights. SUPER bright, good range and relatively diffuse beams. These aren't the pencil beams you'll get from IPF 968s or Hellas, they're broad, but still have a nice throw to them. Hardware is good, mounting bracket is VERY stable. These are a steal at around $100. Just be aware that they are truly 9", meaning they are huge. They look good on the front of my Jeep XJ, but are definitely the defining feature of my rig.

These lights aren’t the cheap chinese knockoffs, these are the CHEAP CHEAP knockoffs. The mounting brackets are flimsy and will allow the lights to shake around. The mounts themselves on the light housings are not made correctly to lock the nut in the side of the housing and allow you to tighten the side bolts. You can not tighten them in the bracket, the nut inside rotates. Do not waste your money.

As far as cheap knockoffs for ARB intensity’s go.... I ended up getting way more than I paid for. These are more flood pattern than anything else. And for that... they work really really well. I have had them on the jeep for about 7-8 months. Not garage kept. No condensation in any of the lights. And you will see absolutely everything within 100 yards of the light.For the price I should have just gone with the 185 watt versions. But these 96 watt models do an amazing job within 100 yards.