GLARKS G-778 120Pcs 28mm 35mm 45mm Alligator Clips Crocodile Electrical Test Clamps Jumper Helper with Protective Insulation Cover (Black, Red, Yellow, Blue, Green)

Great value.

Excellent good quality strong clips

Not bad for the price - only downside I found is that some of them have a bit of corrosion on connections between top and bottom part.

These are not high quality clips, infact some of them feel like production rejects. The coloured boots are all fine although a little slippery at first until they mix with skin oils.I'd say about 30% of the clips are unusable in ways such as the jaws not aligning when closed, a few have stiff hinges and won't fully close without extra force whilst others hadn't had their rivet stamped down (needle nose pliers can be gently used to rectify this one). The largest size was the most defective in my set, although I've managed to fix a few. It's not what I expected, I know they're cheap for the quantity but I would've expected them to at least been usable out the pack. Even clips of the same sizes differ from one another, it's like they've all come from different factories and in my set the spring for the large yellows only had three loops around the rivet instead of four, this made the clamping force weak plus nearly all of those clips were falling apart.Wires should really be soldered rather than crimped with this set, the crimp wings on the rear are for gripping the cable insulation. The less crimping/twisting forces applied to these clips the better, they're already pretty thin metal and prone to bending out of shape.Problems aside I've managed to build myself half a dozen jumper cables that work fine, you just need to remove the clips from their boots and sort them into good and bad piles first.I think the producer of this kit should reduce the quantity of clips in return for upping the quality, it's a bit of a false economy at present.

Very poorly made, my advice is to spend a little more... this item is very weak and most of the clips either twist or break, not good value for money.

Exactly what I need and quite well build

I ordered the larger alligator clips (1.8") and they are much easily to use without your hand slipping off the insulated cover which is a nice benefit.I used 18awg silicone wire and within an hour I had made up a few sets that had a resistance reading 0.3ohms or less. The assembled alligator lead kits I've bought in the past are junk. They use no solder hence the resistance reading bounces all over (3ohm or higher) depending on how the wire is orientated.It's a fun little soldering project making your own jumper leads and well worth the time spent seeing how you end up with a product that is far superior to the assembled garbage that is typically sold online. My advice, buy the clips, wire, etc. and builtd your own to save yourself a headache later on down the road!

The media could not be loaded. Hacen demasiada presión, lo cuál es bueno: me dí cuenta de ello cuando intenté añadir un cable a un par de zapatas y accidentalmente me apreté el dedo jajaja :(, me dolió mucho, pero afortunadamente no me abrió ni me dejó sangrando, sólo fue un pellizco que me dejó un tanto rojo y ya luego se me pasó.También me gustó el detalle de las diferentes variedad de tamaños, ya que a veces al menos para mis necesidades, es necesario puentear puntas pequeñas a la luz, cosa que con unas pinzas grandes de cocodrilo, sería imposible.Son sencillas de colocar en cableado y dan un aspecto estéticamente precioso a tus cables c: ✨

I bought these to have around for a variety purposes. I've used some to make a set of leads which i use in circuit design and development.The rubber protection is substantial and proper, I don't need to fear that they will fail to protect me from the danger of working with potentially harmful voltages. They took to solder quite well.I plan on using a few to upgrade my work bench with ESD four to be precise, with some resistors and leads to a permanent ground to earth.These are priced fair, and I will certainly purchase this brand again.

superb

Bjr reçu aujourd'hui comme prévue , petite surprisse après avoir retirer l'isolant de couleurs il n'y a presque pas d'oreille sur les pinces pour effectué un levier avec 2 doigt , donc pour l'ouvrir la pince sa reste difficile .Sur 5 de vérifier une est inutilisable = poubelle ( sa commence bien ) si non 100 pinces de couleur a 11.99 voir 12.00€ sa reste intéressant question prix . Mais voilas si il sons tousse du même moule sa risque de causé un problème . Honnêtement de vous a moi sa vaut 3 ½ et oui batailler pour les ouvrir . PS je parle uniquement du lot que j'ai reçu .Amicalement Mm Mr Claude Mattéo