BLACKHAWK Serpa Sportster Holster, Size 03, Right-Hand, (1911 Gov’t & Most Clones w/ or w/o Standard Rail)

I just picked up a new Ruger SR1911 (.45) a few months ago and plan for occasional conceal carry. I can't stand to have a paddle holster to poke me in the side or back and wanted to use something more comfortable. Having read the reviews for this holster, I thought I'd try it. This fits my new SR1911 like a glove. I'm able to loop my belt through it and make adjustments for a better fit. It's very lightweight and locks my pistol in place nice and secure. The finger tip lock on the holster holds very well with an easy reach for rapid draw, allowing for smooth draw of the firearm. It sticks close to my body, making a large .45 somewhat unnoticeable if a shirt covers it. The black cover matches my new Ruger perfectly. It's not a cheap feeling holster like what you would have from a soft material like Kevlar. This will almost certainly become my new CC holster.

First off let me state that this is not a toy it is a fully functional holster intended for real firearms thus why some may experience problems with their AIRSOFT guns not fitting the holster,should consider the fact that airsoft guns are not build to the same dimensions as real firearms. Okay now with that said and done I have carried one of the carbon fiber serpa drop legs in the service now for over 5 years and have torture tested them in combat in afghanistan and they hold up remarkably well. This holster fits and retains my rock island armory 1911a2 very well and with no problems. The fact that you can take this holster apart and attach it to an existing serpa drop leg is a plus for sure. I bought two of these holsters and I have put them through hell and gone and severe torture testing and it took me about an hour to destroy one using every day accident scenarios. Over all great holster for a great weapon. 5 for 5 on this. P.S. and for those that want the mag holder Serpa does make them but they dont attach to the holster themselves best bet is to get a paddle mag holder for your mags or a belt clip. Hope this helps all keep your feet dry and your weapon high.

I like this holster, It fits my Girsan 1911 Govt model perfectly. You can change the positions just by adjuting the screws to make it comfortable. Since i got a belly it is hard to find a good spot to keep it in where my fat rolls dont get in the way. Deffinelty locks into place, Wont get taken off your hip. Reccomend

Produce description and photo are deceiving. It says for colt 1911 and clones (not full length). And the photo looks like the description. I purchased for a Ruger SR1911 officer with 3.6 inch barrel hoping it would be close to flush. What came was a holster for the full length government model. This leaves over an inch of empty space between the end of barrel and end of holster. Not what i was wanting. Blackhawk holster are great. I own several. But the product description on this one is off. Sold to my dad for his Colt Government for what i paid.

Last year I purchased a Springfield Armory SA-35 (Browning Hi Power clone, but 50% better). After I broke it in I started carrying it in a quality good morning Galco IWB holster. It did a good job hiding it but just wasn’t comfortable after wearing it 12-18 hours. I took a chance and bought this one. Absolutely love it! It does a decent job concealing but it doesn’t move any on my belt and is lined up perfectly for extremely fast draws. It’s extremely comfortable and the lock is a great safety feature. This was is a quality holder and has stood up great for the abuse I put it through daily. Fantastic Deal!! Highly recommend it for anyone carrying a full size, all steel weapon that is hefty, not a plastic weapon. It’s super comfortable to wear all day in any weather. Was always concerned getting a $140.00 holster wet multiple times. I would have paid twice as much for it, now that I’ve been wearing it daily for over 3 months and counting. You will be impressed with the quality and convenience of a Paddle Holster like this one! Guaranteed!

I have several of these holsters, they are the best. Fit great and super easy to use, and very affordable.

Bought for airsoft for a KP08 / KP-08 Hi capa gbb pistol by KJ Works (KJW). I had to spend the better part of two days with a dremel, sandpaper and files and make some linear cuts in the front to make the thing fit. KAOS makes hi-capa specific holsters that will work from the start, but they run $60+ so this value-friendly option with a bit of elbow grease did me well. Worth noting, I did have to narrow my trigger guard on my pistol as there's no feasible way to evenly sand down material from within the holster's trigger guard capture area. The product perfectly captures a standard slim/classic 1911 without any modification (and continues to fit them with the modification), useful for future springer matches with friends.

The Blackhawk Serpa holster is my Everyday Carry Holster, I wear it up to 12 - 14 hours a day. My firearm is secure and is very difficult to remove my pistol unless you are familiar with their retention lock, you can drag me around by the pistol grip, but my sidearm is safely in its holster. With that being said it is also one of the fastest holsters I have ever worn, I have been wearing the same one for over 20 years now, will order another one for my new M1911A1 .45 ACP. I like the quality of Blackhawk equipment, I also carry their one man tourniquet, it can be applied with one hand on your self or you can apply it to someone lock it down and mark what time it was applied.

While this holster is meant for a standard 1911 it works great for a kjw hi-capa. Initially there was a huge question mark hanging over whether it would fit due to the larger grip size. This however was just speculation, and the Airsoft slips in perfectly. The release is great. The only problem I have is with the belt hooks which, as of this review, I still can't fit in their respective retention holes. Unfortunately the instructions are so widespread over Blackhawk's products that they are pretty much useless in this aspect. Regardless I've found a way to make it work with a smaller width belt. All in all I reccomend the holster and would love to use their other products, providing I have the occasion.

セルパを使用するのは危ない(足撃っちゃう)とどこかで読まれた貴方 おもちゃの銃なら全く問題ありません、てかサファリランドとかに比べたって 圧倒的に抜きやすい、戻しやすい、軽い、剛性もある、と、言うこと無しですよ。 (確かにボタンのスキマに石ころが入ったらアウトですが・・・) ※マルイさんのMEUピストル、デトニクス、レイルなしフォリッジで試しております。 ちょっとパドルが大きくて、わたくしはベルトループに変えました あとパドルの裏にひっかかりのツメを取り付けるのがとても硬くて大変でした。 インドアならもうこれですよ、お奨めです！

Fit my norinco 1911a1 perfectly out of the box. It has held up well and not shown any signs of failure or any wearing at all. Will likely buy more serpa holsters for my other pistols in the future.

東京マルイのMEU用にと購入。 これMEU専用か？！ってぐらいなんの加工もなく、すんなり入ります。 取り出しもスムーズで良いです。 ただ手持ちのMGC製のガバメント（モデルガン）だと窮屈でスライドに擦り傷が付きます。

マルイのミリガバで使用。 しっかりホールド。でも、抜きやすい。 コピー品で銭失いするくらいなら、ホンモノを買いましょう。経験者より。