DEEPDREAM UCFL205-16 Pillow Block Bearing,Pack of 2 Flange Mounted Bearings,1 inch Bore,2 Bolt Flange Bearing, Self Alignment Pillow Block Bearing

I used these bearings for a dump trailer tarp roller. They are well made, and the self-aligning feature is really helpful and so is the grease fitting so these should last for a long time. I very satisfied so far.

I bought a set of these bearings then changed my design and need another set to match the original set so I bought a second set. These bearings are holding the weight (350lbs) and preforming excellent. Both shipments arrive on time.

Good

I rebuilt an old, abused Brent pottery wheel (kickwheel) that had rusty, rough bearings. Pottery wheels only need to spin at 60-240 rpm, but smoothness and sound level are important. Before installation of the new bearings, the wheel could spin for about 5 minutes but vibrated a lot and was loud. After installation of these deepdream bearings, the wheel spun 80% longer, was very quiet, and the vibration was 25% (or less) of the previous levels as measured by the Vibrometer app. I am very happy with the performance of the rebuilt pottery wheel. Contrary to what another reviewer said, the bearings I received ARE self-aligning bearings. I did note that one of the four set screws was missing the ball end, but this is not an issue for me.

The two I received had tight tolerances making for an interference fit instead of a slip fit. The grease fittings included will help keeping these bearings lubircated. Used these on a 30 year old go-kart rebuild.

Justo en la media

I haven’t used these yet, but I have used this brand of bearings in past, and can say that they will hold up better than most other brands. I can’t send a picture cause this app won’t let me view all my photos

As other have said the bearings are not pressed in square

worked well and having a grease fitting is a big plus

These bearings are doing the trick.Originally I had thought that they were irreversibly out of whack.But if you bolt these to a surface and use a long pipe you can centre these, I found a good way to gauge was to bolt them on a level surface then put a level on them and adjust till the face of the bearing is level.

I Almost went everywhere every hardware store finally I have bought this item from Amazon like a snap of the finger not only that fast shipping before expected date

Bonne qualité

bonjour les roulements supporte tres bien la charge.merci.