KAISH 11 Hole ST/Strat Style One Humbucker Guitar Pickguard Scratch Plate for Delonge Stratocaster/Strat Black 3 Ply

I decided to convert my old Fender Strat into a Tom DeLonge Strat and bought this pickguard for the project. It fit my Strat well enough that I didn't have to drill any new holes in the body and the humbucker fit perfectly. The only thing is that I had to shave down the hole for the volume pot a little bit to make the 500K pot I ordered fit but that's only a minor inconvenience and it isn't enough for me to dock a star from my rating. Good product at a reasonable price.

This pickguard is exactly to spec. It looks good and is very well packaged. It's cut very cleanly--better than the original that came on my guitar, so that says a lot. The holes line up on my Squier Sonic. The neck and bridge fit perfectly too. Note that I replaced my bridge with an aftermarket one, so I didn't check to see if it would have lined up with the stock Squier bridge (I'm thinking the hardtail was too wide for this opening). Easy solution: double check the specs and measure your guitar, especially at the bridge. I have ordered MANY from KAISH and they are very consistently good. I have noticed slight variations between items, even when ordering two of the same. But, nothing that has impacted my mod projects greatly.

This worked great on my import S style guitar , very simple swap and all the holes lined up. It’s a Glen Burton S Style , with a gotoh bridge and a Dimarzio SD

All you need to Rock is a hot Humbucker and a volume knob!

Bought this pickguard for a project guitar. I wanted to add 2 more holes for tone knobs and one for a 3 way switch. Noticed when I got the pickguard that the volume potentiometer hole was a little further down the pickguard than a standard strat. Checked it with a standard 3 single, 3 hole pickguard and I was correct. It is lower. If you need to add holes, this may be an issue. As to fit, it is great. Had to trim a little by the neck pocket, but that is not unusual. All the mounting holes were exactly where they needed to be.

Fits nicely on an Allparts body.

Installed a Seymour-Duncan JB. Clean fit, quick and easy installation.

Its a nice build and thickness. BUT, 1 screw hole on squire debut strat didnt line up. Fender cts pots is a very tight fit. It does have double plastic cover?

Great quality pickguard. Perfect fit. And easy to install

Passt 1 zu 1 auf meine! Strat! Sieht gut aus und ist gut verarbeitet! Ich würde es wieder kaufen. Verpackung ist professionell!

Size wise, its the same as every other MIM pickguard I have, some variance in screw placement, few mm here and there which is standard for aftermarket parts but otherwise a solid replacement. I mounted mine on an FSR Hard tail Stratocaster. It wont however be a direct replacement for a hardtail Stratocaster(With both the original and my aftermarket bridge) so you will need to modify it somewhat. Which was completely expected. But thats the only part that needs modifying. So if you have a Delonge signature model or hard tail strat, it wont fit without modification. But if you have a strat style tremolo(not a floyd), it should fit.

Great quality but the holes did not fit my Harley Benton perfectly. I had to drill a few new ones. But I'm satisfied with the product.

okokokokok