Xprite 2" Rear Bumper Towing Hitch Receiver Kit

When you first use it it is very tight so you're going to have to scrape out the paint on the inside but other than that it was easy to install on my Jeep. It took me maybe 35 minutes. If you have the factory L bracket bolts in prepare to use some elbow grease eriod although the instructions sometimes say lower the exhaust I did not have to there were plenty of room in between to get a ratchet wrench But if you want to use power tools you definitely have to lower the exhaust

I have a 2024 Jeep Wrangler sport. This tow hitch fit on so easily, I did not have to remove the muffler or anything. It took me about 15 minutes to put it on and it's super sturdy.

The instructions are tiny and difficult to see, but it's such a straightforward installation you won't really need them. We installed the bolts holding the hitch in the frame opposite the instructions to avoid needing to remove the bumper. To help get the nuts on in the tight space between the frame and the bumper, we put a piece of tape on one side of an open ended wrench to help hold the nut in the wrench. Then, once the threads caught we just tightened it down with a torque wrench on the muffler side. You can tell a good engineer designed this hitch as they called out Nyloc nuts on the frame bolts. These nuts are ideal for high vibration applications as they won't entirely back off if they get loose. One other thing to note, there is a little notch in the electrical plug that mounts on the hitch. You want to orient the electrical plug properly so that the notch holds the plug in the hitch. It was opposite the way we intuitively thought it should go, so pay attention to the notch.

The hitch installed easily and quickly, but after install and an attempt to slide the male side of the receiver hitch with a ball on it, it refused to slide in. As much as I tried, none of my hitches slid in. I felt with my finger and welds just inside the receiver were the obstruction and the four corners were no correctly sized to receive the ball part. I wasn't about to remove it and return it so I took a file and a grinding tool on a drill to remove the weld ridges. It took me about an hour to get it to finally go in as far as necessary, but had to hammer it in and then hammer it out. So, not a very good product and the seller should be advised of this manufacturing defect.

Received as advertised and as scheduled

Good quality direct fit on my 2018 wrangler JK Altitud E-z installation The best part is that I comes with a plug and play light extension to connect the trailer

Easy to install. All of the parts lined up with the existing holes already on my vehicle frame. I have a 2021 Jeep Wrangler. I use it for a 3-bike-rack and it works fine. There was some wobble so I ended up buying a hitch stabilizer for under $20 that fixed that. I assume the wobble was from my bike rack design not the hitch itself. The dealer wanted to charge me around $1000 to get a Jeep with a hitch option. This saved me over $900!

Purchased to be able to take our electric bikes with us when we travel and works great very easy install on our 2021 Wrangler all holes lined up perfectly.

Buen accesorio se ajusta adecuadamente a mi Jeep jk excelente producto

Not at all the same hitch receiver shown in the photos!! Finish in the ad photos is powder coated black matte I received black glossy painted with a cheap finish and sharp choppy edges and welds. The shape of the attachments for the safety chain is totally different, and the bolts are not black. Also the plug cap is not the same as the one shown. Totally deceived and very unhappy.

Good

Fit as described, easy install

Easy to install. Thick solid material and quality welds. The only thing that is wrong is a bracket for electrical connection will not receive any 4 pin connector. The slot is too wide and there is no way to attach any standard connector to it.