SAILEAD Left Driver Side Sun Visor Replacement Compatible with Honda Civic 83280-SNA-A01ZB 2006 2007 2008 2009 2010 2011 Sun Visor Assembly (Beige)

Satisfactory replacement for OEM Honda sun visor.The driver's sun visor on a 2007 Civic stopped staying in the up position, even after trying those "DIY fixes using screw posts" solutions on YouTube. Didn't want to get an OEM visor for $50-60, especially since they are reportedly prone to failing again. So, decided to try this aftermarket visor.The color matches the OEM visor color "Atlas Gray" very well. I installed the replacement visor using the OEM mounting screws from the old visor with no problems. It stays in the "up" position fine.As other reviewers have noted, the visor rattles because it doesn't securely snap into the overhead clip. I used a small 4-inch zip tie around the "roller" on the visor. This is working well so far. No rattling. The visor is snugly held by the clip, and with gentle pressure releases fine.

For half the price of an OEM Sunvisor, this was definitely worth the money. I had the problem that most Honda Civics this generation has where their sun visor begins to significantly sag so I tried the bolt technique to stop it from sagging. Sadly that didn't work so I resorted to purchasing this new sun visor. In the picture, the new sun visor is located on top while the previous one is located on the bottom. The color(Atlas Gray) matches perfectly with the OEM visor. The newer visor also has more of a whiter sticker when compared to the OEM's yellowish sticker which is find much better. This was definitely worth the purchase!

My mechanic quoted ~ $160 to replace my old visor, which was always in the down position yet not far enough down to touch the windhsield, so it was blocking visibility night and day. what a pain! (apparently this is a problem for 2010 Honda Civics, but not enough of a problem to be a recall item.)I'm really grateful to have found this, at a so much better price!The only thing is, one screw went in fine but the other screw won't go in more than half way - and i tried for like, an hour to get the angle right, switch screws, etc. It's currently on my list to find a same-diameter screw that's half the length to replace the one that is stuck half way.You may have better luck with that than i did.

I bought this as a replacement part for a '06 Civic.It came looking exactly like the original. It came with the needed screws. And it was pretty easy to install.A tiny issue is that it does not move as smoothly as the old one did, and sometimes it doesn't stay in place easy when I move it back up. It never is an inconvenience or a problem though, so I'll still give 5 stars.But other than that, it looks and functions just like the old one. No one will be able to notice that it was replaced, so it was just what I needed.

I'm really happy with this product!!Pretty easy to install and it fits amazing 🙌🏾I added a before and after picture and I honestly can't complain.Also, I saw previous reviews about the "roller" being too thin so it rattles and I agree with that, BUT its and easy fix.... all I did was add a pice of tape around the "roller" and also one on the clip and its fixed. No more rattling 👍🏽(If you zoom in on the after picture by the "roller" you can see the tape)

Very happy with this product. It was useful when buying it because there was an option to fill in information about your car to see if the product would fit. I bought my car without a visor for my driver side, and now this visor fits perfectly for a reasonable price. Lots of other visors were unrealistically priced for older cars. Luckily this one was just right and it comes in the perfect color to match my car. I have nothing negative to say about this product.

This product looks and feels like the original. It was easy to install. However, as many buyers have indicated, the little bar that inserts into the cars plastic clip (not included) is a small diameter than the factory visor. As a result, the visor does not stay in place, and jumps out of the clip while driving. The fix is exactly what another smart buyer did: put one or two very small zip ties around the bar, to increase its diameter and make it a tight fit in the clip. It is actually too tight now, and requires two hands to pull off to use on the side window instead of the front. So be sure to use a small zip tie! For the manufacturer, i'd recommend charging 1 dollar more, and including a clip that matches the bar, or just fix your bar diameter.

As in some other reviews, just wrapped a few wraps of electrical tape around the bar that snaps in the holder, and this thing is perfect