10Packs 4-Pin RGB LED Light Strip Connectors 10mm Unwired Gapless Solderless Adapter Terminal Extension

Exactly as described and work really well to connect two sets of GE Light Strips at a fantastic price. Highly recommend. Quality was great and was very easy to use!

I have a Kasa led light strip and part of the light strip did not light up. I cut out the part of the light strip that didn't work and used this connector to connect my light strip back together and the light strip now lights all the way up.

They work good but, it is tricky to get them to snap to hold on some. Overall, a good buy.

These work really well haven't seen an issue

These connectors are difficult to pry open and the pick that comes with it is useless. I was able to open them using a micro screwdriver but even with that it was tricky to open without breaking the tab that holds the connectors closed. Once they're opened inserting the LED wire is tricky as well so my advice is to have the LED lights turned on when connecting the wire to the connector as you're likely to find that they're not working after you close the connectors. Having the LED lights turned ON will allow you to see if you have a good connection. Don't worry these are low voltage. The instruction is not very useful so here are the steps I took to connect the wires:1. Once the connectors are opened, the trick is to lift the 4 metal silver wires inside the connector so that the LED wire strip can be tucked under them to have tight connections. I used a flat micro screwdriver to lift the metal wires but do it gently to prevent breaking them.2. Tuck the LED wire underneath the 4 wires inside the connector and then close the connector tab. There's a channel in the connector where you can slide the LED wire.3. Shut the connector tightly and make sure the tab on the connector snaps closed. This step will push the lifted metal wires down for tight connection.4. Do the same to the other end of the connector with the LED wire strip that you're connecting.I wish I could take a video but I don't have a tripod. Good luck!

These work pretty good. I can’t tell the perfect part because my LED lights are bought from a 3rd party on here and they are smaller than the prongs used on these connectors so it’s been a challenge. May need to get a Soldering kit for my circumstances! They are also cheap (:

I could not get these to work. I lined everything up. Tried cutting, reinstall, everything. Dont waste your time and money like me!

The product works as it showed the only thing that I have a problem with is when you pinch them close they don't always stay closed I had to use a little bit of nail glue to keep them locked closed

After accidentally cutting our LED strip lights we were looking for ways to fix them versus replacing as they were through our glass railings along the deck. After a few tries it works seamlessly and saved our views. Great idea

Very easy to use

Faciles de usar, excelentes

جيد

La semplicità di utilizzo.