GarminVIRB Ultra Cycling Combo Mount

This combo mount probably does not last as long as its K-Edge competitor, but you could get 4 of these for the price of 1 K-Edge assembly. I had K-Edge for my old Garmin 800, but get this for my new Edge Explorer 1000. A cyclist friend told me there will be vibration in video with plastic mount, but I tested this mount with my GoPro last weekend and saw NO VIBRATIONS at all! For the limited amount of time exposing to the sun, I believe this mount will last a long time, perhaps the lifetime of your GPS! This fits all Garmin cycling GPS 800s, 520 and 1000s model. The under mount fits GoPro or VIRB camera. Perfect position for the GoPro, no part of your handlebar in the picture.It is rather short, and your GPS would be mounted above the handle bar, so this might not be for cyclists who care about aerodynamics and few seconds extra on a ride. For the rest of us, this works just fine with high quality and cheap (around 16 bucks vs. $60 K-Edge job).

For the price that Amazon charges for this, it is the most amazing bargain ever. However, there are some caveats to this product. First and foremost, it only comes with one set of screws for the edge mount. If for some reason, you DON'T want to have the VIRB mount on at all times, you can't with the set of screws provided or the screws are too long and will stick up and not let you insert your Garmin Edge. If two shorter screws were also provided, you could run the mount without the VIRB mount and it would be amazing. The other caveat is that you can rotate the edge mount 90 degrees and mount a Garmin 910XT on the top of the mount. However, to do that, you then have to rotate the VIRB mount 90 degrees also but this would likely render the virb mount almost useless as you can imagine, since you would be shooting the sides and not the front.I also forgot to mention that of the allen wrenches that are provided, the smaller one which is presumably to change the orientation of the edge mount, does not fit in the screws at all. I had to use a 2mm allen wrench of my own. Not a big deal but would be very annoying to someone who doesn't have a whole set of allen wrenches.

This works fine for Garmin devices including the 520, and GoPro or similar action cameras.One thing I want to note is that this mount WILL NOT work for the Cycliq Fly12 light/camera combo. The design of the mount does not leave enough depth for the Fly12. You'll need a Barfly or other mount for this application. I understand that neither Garmin nor Cycliq advertise this particular mount for this purpose, so I cannot really let that affect my rating, but I want others to be aware if you are considering the Fly12. It does use a GoPro-style mount but is a much different size/shape than other action cams.

Well constructed mount, but when I mount a VIRB XE on the bottom section it blocks reception from my Stages power meter to my Edge 500 mounted in the top section. I had a Garmin Out Front Edge mount but I thought it would be cool to use a camera on my rides, mostly to document the license plate number of the cars that run me off the road. I replaced the Out Front mount with the Combo Mount, but when I went out for my first ride, the power information was intermittent. Initially, I thought my power meter battery was weak and replaced it, but the same thing happened on my next ride. I removed the Edge 500 from the mount and held it in my hand and it worked normally. Put the Edge back on the Combo Mount and the signal was blocked again. Remove the camera, and the Edge worked again in the mount. I had to remove the Combo Mount and go back to 2 separate mounts. I can't speak for other camera, head unit, power meter combinations, but the above doesn't work.

A good product with one draw back. It is not as long as I would like. I have a Cycliq camera light combo and had to put a extender on this to give it the room needed to not hit bike stem. This also happens with my night rider lights.

I had to buy a go-pro adapter from bontrager and the appropriate ion light, but it works light a charm and is unobtrusive.

Bought this to mount because it can mount Garmin and GoPro cameras at the same time. Good quality. Fitted it onto my bike is no time. Very happy with it.

Good value for money

Good, sturdy....expensive though

Fácil de instalar, parece robusto, no se mueve pasta nada con el GPS. Tengo pendiente probar con una cámara debajo pero pinta bien, ya luevo 4 salidas con el. Le metería un 5 si tuviera 2 o 3cm más de largo para mejor visibilidad en marcha sin apartar mucho la vista del camino.

Genial el soporte ya que te evitas tener que poner otro soporte para la cámara.El tornillo de sujeción con llave allen es perfecto porque siempre se lleva multiherramienta y lo puedes aflojar cuando quieras.Totalmente compatible con GoPro, yo lo he usado con una y sin problemas.

Es perfecta para una bicicleta de ruta que tiene poco espacio en el manubrio, tener cámara y ciclo computador en una sola montura es genial, se acopló perfectamente con la gopro hero 5 black y obviamente el garmin 810 no tuvo problema para montarse. Altamente recomendable.

Calidad y robustez, lo único que para el 1030 solo sirve sobre el manillar no se queda integrado o aerodinamicamente colocado.Calidad y robustez Garmin