HumanCentric VESA Mount Adapter Compatible with Asus Monitors MX239H, MX259H, MX279H, and MX27AQ (Does not fit MX299)

I love this adapter! It works as advertised with my 27" MX279H 11.5lbs monitor. I used the adapter with Mount-It! MI-3352LT Laptop Notebook Desk Stand Mount, Full Motion Height Adjustable Holder, Articulating Vented Platform for Cooling, Fits up to 17 Inch Computers, Clamp Mounting, 22 Lb Capacity Black and it works beautifully. The only thing I would suggest HumanCentric to do is to send a longer bolt that can replace the silver bolt that comes with the monitor. I was able to use the original silver bolt, but I did not feel very safe with it. I don't believe the length of the bolt is ideal to use with the adapter. It wasn't very sturdy. At one point, when I was adjusting the angle of the monitor, the original silver bolt came off and almost dropped my monitor. And yes, I tightened it very good! I replaced the silver bolt with a bolt that had the same width but longer, and now I can adjust the angle of monitor without a concern that bolt may come off again. Also, no more wobbling, and the need to adjust left and right as other reviewers mentioned. Please refer to pictures.

Adapter works great and instructions are clear. One thing to note is that the adapter attaches to the silver stem with the base removed, so that in combination with the way my vesa mount works means the monitor juts out more than the other one I have and it also puts more torque on the adapter itself. All in all, it works great and I was able to get it aligned.

I can't believe I spent 30 bucks on this piece of metal which doesn't work on my MX279 monitor. This adapter ask you to use the screw provided by ASUS where in my MX279 it clearly cannot be taken away from the circular base. I don't understand how much it'll cost them to provide a single screw for a $30 product with just one piece metal. Junk! Will never buy again.

It fit on the vesa great however my monitor was like i dont wanna fit on this... Basically i had to go buy a screw that was a 1/2 longer (really! charge 50cents more and give us one). And it didnt allow me to pitch up enough to be even with my other two monitors.It'll work but not as well as you might want.

This VESA adapter works well for my MX279H but I would like to point out a few words of caution. Because the center of gravity is shifted, you may need to angle the mount downwards slightly and tilt the monitor upwards to get the correct balance. It's a sturdy mount, and the fit was perfect, but the monitor's design causes it to be front-heavy. I guess that's more of an issue with the monitor than the mount. This product shouldn't even have to exist, but it does and I'm very grateful for that.

Works Great! For an awesome monitor not to have built in VESA, it's sad - This is a perfect option to mount where the monitor manufacturer failed. Great product, easy to install and is secure and better than any other options I've tried!

It is well built/finished and all the holes line up. My only issue for my situation was that I'm using fully articulating, dual monitor mounts and because of the design of this adapter and that it sets the entire weight of the monitor about 1-2 inches from the mounting plate thus increasing the pull on the joints, I have to tighten the joints behind the mounting plate much more than they probably should be tightened just to keep the monitor held firmly in place. Also, due to the angle of the adapter base where the monitor stand mounts, when I need to rotate my monitor to portrait orientation, it's less-than simple with much adjusting necessary in order to get a comfortable viewing angle.That being said, the monitor with the adapter is still being held up by this mount and it functions as expected...just not quite perfect for my situation but it'll do for now.

I returned it

unica soluzione possibile se hai un asus mx279h per attaccarlo al muro o su una staffa, montati a staffa sono davvero solidi e ben saldi, tutto va nella propria posizione senza troppo gioco, consigliatissimi

Einen schönen guten Tag,ich habe mir vor kurzem diesen Adapter für meinen Asus MX 279H Monitor besorgt und bin im geamten nun recht zufrieden mit diesem. Einziger Kritikpunkt und auch ein Verbesserungsvorschlag von meiner Seite her ist folgender: Schaut man sich den Adapter an, so sieht man 2 Schlitze. Der untere Schlitz ist für das Festschrauben des Monitorfußes gedacht, der folgende für die Haltung dessen.Bei mir war es nun so das ich den Fuß zwar festschrauben konnte, ich aber dank des kleinen Spaltes, den Fuß an sich, nicht weit genug nach hinten schieben konnte um so mehr Halt im gesamten für meinen Monitor zu erzeugen.Ich habe daraufhin kurzerhand einfach etwas vom Plastik meines Fußes weg geschnitten um so weiter nach hinten mit diesem zu gelangen. Nun steht der Monitor viel satter auf dem Adapter und ragt ausserdem nicht mehr so weit vor wie zu Anfang.Mein Vorschlag daher an den Hersteller - den Schlitz/Spalt womit der Fuß hinten hinein oder eingesteckt werden soll, um dem ganzen mehr Halt zu geben, zu vergrößern. Ausserdem wäre eine große Unterlegscheibe mit entsprechender Bohrung für die Schraube des Fußes nicht verkehrt um dem ganzen auch von Unten mehr Halt zu verleihen von Vorteil aber kein Muss.Auf dem Bild erkennt man hoffentlich den besagten Schlitz/Spalt und meinem etwas zurecht geschnittenen Monitorfuß ;)

Perfect.....does what it says on the tin, very solid. It didn't have my model on the description, MX27UQ but I can say it works perfectly.......there is just enough room to fit your hand and cables in the back of the monitor.

Great customer service answering my querie fast.This will for the MX27AQ which is not listed on the product page but is the same style base.This fits easily and quickly and reuses the same screw from the base so no worries about losing it if or when you want to put the screen back on the original stand.Great product.

very well built and does what it says however it doesn't really hold the monitor in place as the slot where a part of monitor stand goes is a little wide which causes the monitor to swivel.