Electrically Conductive Paint 50ml - Water-Based Carbon Coating for Guitar Shielding, PCB & Remote Control Repair - Matte Black EMI/RF Shield

Good for small electrical repairs such as worn pads - be aware that it has high resistance so it it won't work to repair long traces. Dries quickly.

I wanted to shield the control cavity of an electric guitar I’m putting together. I applied the paint and waited a few days. I’ve completed the wiring and grounded the painted sides of the cavity, creating a Faraday cage. It works in shielding the guitar from noise. But the paint hasn’t dried to a sealed surface, it has dried as a carbon particle powder. If I touch the sides of the cavity, I get black powder on my fingers. And it says on the container it’s a skin irritant. See picture of a white kitchen towel that I touched the surface with. And this is three days after painting. Not really suitable for my purposes. I will try a different shielding paint. You can get types that do dry completely to a sealed surface, this isn’t like that.

I was trying to electro plate in copper a 3D print of mine and it did not work very well, however this is not the products fault, more like my rudimentary knowledge of chemistry.

Looks good yet to use Thank you

The paint quality is okay and dries quickly, but it might not be suitable for all purposes, as the paint is not durable enough for my needs because it doesn't stick for long. However, it is still good for most of the intended purposes. The bottle has enough paint to apply if it comes off. I also tested it on a TV remote, and it worked fine on the rubber one but did not properly stick on plastic.

used to repair my second Netatmo exterior weather sensor, first one was replaced by Netatmo, this one is outside warranty. fully functioning again, lovely stuff

I don't like that the bottle is shaped more like a hip flask so easy to topple over (don't tell me how I know), and also the consistency is quite liquid. This was used to shield an electric guitar and it took a few coats, but there's more than enough for many coats for a typical Strat body and from testing with a multimeter everything showed good connectivity. It is also easy to clean up afterwards with a bit of naptha, though I suspect the coating is going to be a bit fragile. But once under the pickguard it shouldn't move at all.

I bought this to shield the cavity of a guitar I was building. I bought this because of the quantity available in one pot. The problem is it never sets! This means it continues to generate carbon dust after it had dried, its goes everywhere! Onto fingers, hands work top, all of which transfer to the grain of my guitar! Once in the grain it does not come out! The electrical conductivity after 2 or 3 coats was around 30ohms.... So, it works but is simply not suitable for a guitar cavity. It paints on like water, not like paint , drys quick enough but leaves a dust film. I have had to seal the surface with poly to prevent further marks.

Werkt perfect om kleine reparaties aan printplaten te verrichten. Bijvoorbeeld door waterschade of lekkende batterijen. De sporen kunnen eenvoudig opgeschuurd worden en gerepareerd met deze geleidende lak. Zorg voor een heel klein kwastje!

Worked perfectly to repair a keyboard with keys that weren’t working.

Klappt tatsächlich. Es ist natürlich mitunter schwierig Fernbedienung auf zu bekommen ohne das was kaputt geht, aber dann wenn man an der Kontaktmatte ist hat man gewonnen. Fernbedienungsplatine u. Gummikontaktmatte reinigen. Dann vorsichtig Liquiwire auf die Kontakfläschen auftragen. Über Nacht trocknen und dann wieder zusammenbauen. Meine FB funktioniert wieder wie neu. Leichter Tatsendruck und nicht mehr dieses auf der Taste herumknubbeln.

Excellent Product. Repaired Remote Control non working buttons. Easy to apply leave to dry and it's done. All buttons now work perfectly. Thanks Amazon and the Seller for this amazing product ! I recommend the Product and the seller 100 %

Me ha funcionado bien en varios mandos seca rápido y a las pocas puedo volver a montar el mando