300467 Paint N Peel Fireplace Cleaner – Removes Smoke & Soot Stains from Brick, Tile, & Stone Surfaces Around Fireplace Fronts & Hearths – Water-Based, & Easy Peel-Off, 1/2 Gallon

The CHIMNEYRX Paint & Peel Fireplace Cleaner has been a game-changer in restoring the beauty and cleanliness of my fireplace. This innovative product has effortlessly eliminated stubborn smoke and soot stains, rejuvenating the appearance of my fireplace without the hassle of traditional cleaning methods. In this review, I'll share my experience with the CHIMNEYRX Fireplace Cleaner and why it has become my go-to solution for fireplace maintenance.Effective Stain Removal:The CHIMNEYRX Fireplace Cleaner has exceeded my expectations in its ability to remove fireplace smoke and soot stains. The formula's decisive action quickly dissolves and lifts away even the toughest stains, leaving the surface refreshed and pristine.Paint & Peel Technology:The paint and peel technology of this cleaner is genuinely remarkable. Applying the solution is simple, and once it dries, it forms a peelable layer that encapsulates the stains. I easily peel the coating away when dry, revealing the clean, stain-free surface beneath.Effortless Application:The CHIMNEYRX Fireplace Cleaner is incredibly easy to use. With clear instructions, I could apply the solution to the stained areas without confusion. The process is straightforward, and the results are impressive.Safe and Environmentally Friendly:I appreciate that the CHIMNEYRX Fireplace Cleaner is safe to use and environmentally friendly. The non-toxic formula eliminates the need for harsh chemicals, making it a responsible choice for my home and the environment.Minimal Mess:Unlike traditional cleaning methods that often create a mess, the CHIMNEYRX Fireplace Cleaner's paint and peel technology ensures a clean and tidy process. The peeling away of the dried layer leaves a minimal residue, further simplifying the cleanup.Visible Transformation:The transformation of my fireplace after using the CHIMNEYRX Fireplace Cleaner is genuinely remarkable. The previously unsightly stains have vanished, revealing the true beauty of the fireplace's surface. The improvement is visual and enhances the overall ambiance of the room.Generous Quantity:The 1/2 gallon size of the CHIMNEYRX Fireplace Cleaner provides ample product for multiple applications. This generous quantity ensures I can tackle various staining issues and still have plenty left for future use.Cost-Effective Solution:Considering the effectiveness of the CHIMNEYRX Fireplace Cleaner and its generous quantity, it offers excellent value for its price. It eliminates the need for frequent cleaning and provides long-lasting results.Conclusion:The CHIMNEYRX Paint & Peel Fireplace Cleaner has redefined fireplace maintenance with its effective stain removal, paint and peel technology, effortless application, safety, minimal mess, visible transformation, generous quantity, and cost-effectiveness. It has effortlessly restored the beauty of my fireplace and simplified the cleaning process. Suppose you're seeking a hassle-free and effective solution for removing fireplace smoke and soot stains. In that case, the CHIMNEYRX Fireplace Cleaner is a highly recommended product that delivers exceptional results and transforms your fireplace into a focal point of beauty and elegance.

I can see how this product works in theory. But it practice it was largely ineffective. First of all, there is not enough material in the container to cover one fireplace, so I ended up putting it on thinner than I would have liked, making it impossible to remove. I then had to buy a second container to recoat the problem areas to remove the thinner material. After I was done with all of this, the end effect was that the fireplace looks about as dirty and sooty as it was before I started. So besides being difficult to remove, the product is not very effective. In the end I feel like I wasted $140 and hours of my time with no real benefit.

Product was easy to work with and I found other reviews helpful for advice. It is true you need it on THICK. However, it is definitely possible to have it too thick in the mortar where it doesn’t dry as much as needed-it was tricky to get off in some moister spots. The product made the fireplace much better, but as you can see from the photo there is still work to do. You can actually see the outlines of where I taped the product (most of the overall fireplace). I’m still happy because it dramatically reduced what I need to clean by scrubbing, but my results weren’t quite as good as advertised/as other people had.

This was a problem at first. My fireplace outer surface is under 40 square feet, so I purchased half a gallon of Paint and Peel. I spent couple of hours applying it brick by brick, not using the provided brush but another smaller one, so I could apply it over individual bricks and grout spaces thoroughly. I did 2 coats, at places even 3 and used all of the product. Apparently it just came not thick enough. Two days later, when the layer turned transparent and ready for peeling (picture 1) - I couldn’t peel it at all. It was too thin and resembled bubble gum smeared all over the wall, every attempt to remove it just caused it to tear instantly, no matter if I used fingers, nails, tweezers or scraper (picture 2).It looked hopeless, so I left a complaint here on Amazon. I was then immediately contacted by Shawn Wright from SaverSystems. We communicated via email, I explained the situation and sent him some pictures. He wrote back that he will mail me more product in order to apply it again in a thicker layer. The reassurance he gave me that the product will bond with its old layer was relieving because I was out of options for removing the dried thing and this meant there was actually a hope for a solution. Light in the tunnel. Few days later just as he promised I received a package in the mail containing three! (3) additional half gallon buckets of Paint and Peel. A $150+ value absolutely free. It took me another 3 and half hours to apply it, which I did just as meticulously as first time. I didn’t treat it like paint this time, I worked with it as with plaster instead. The new layer I put was as thick as it was possible to be without dripping down by gravity (pictures 3 & 4). 2 days later it was partially transparent, but the deep niches between bricks were still whitish, so I gave it additional 4 days to dry out completely. Thus, about a week after applying it a second time it looked ready for the crucial big peel step. I took me one evening from 9pm to about 1am but I was able to remove it ALL! What a relief!! What slowed me down was a strip around the fire door and another one under the wooden top which I had to scrape away inch by inch because it was still too thin (I simply shouldn’t have reached so deep into those places with the brush), other than that it peeled off mostly like in their video. I could pull it off the wall few bricks at a time using both hands. At the end I washed the bricks with a damp cloth just in case. The overall result is stunning – this product preserved the natural color of the bricks while refreshing them and the smoked dark spots are gone (pics 5 & 6). The fireplace now looks fresh, bright and new. Much better than if I had painted it with masonry paint.It took me about 10 hours of kneeling and squatting around this tiny fireplace mostly because I knew no better to apply it like plaster, not paint, however the end result will be rewarding for many years to come. Even if you avoid doing my mistakes you should still prepare for hard work. But I think it’s well worth it. My special thanks go to Shawn Wright from SaverSystem, you truly saved my project Shawn, I wouldn’t have dared to apply more product on my own, so if it wasn’t for your help this fireplace would’ve been a total mess. Thank you for not allowing this! Paint and Peel really works when used and applied right!