Multitool with Pocket Knife, Birthday Gifts for Men Women Mom Dad

So this is an excellent multi-tool for alot of reasons. It was my first pick when I was looking for a daily driver. I will first write a mini review on every individual tool, then I will write a more macroscopic review. Starting with the Pliers. The pliers are quite good. They are very thick, I have never been worried about them failing. I will also say that they do not have any exposed spring, and in the 8 months I have owned these pliers, whatever mechanism that is used to keep the jaws open has not weakened even a bit. The teeth are quite solid, and have not received any noticeable damage upon study. Full disclaimer, I have used the pliers the least out of all the tools except the awl. The size at the very tip of the pliers is 35mm. These pliers are not quite as needle nose as one may desire, but when clenched the nose is 2.7x5.3mm rectangle, which is pretty small. The wire-cutters are, in my opinion, the weakest part of the tool as a whole, but will still suffice for a vast majority of tasks. They come quite sharp, and the tool will never shear apart. The jaws of this tool are firmly in place, so if your wire refuses to cut, you will not damage the tool as a whole, only the sharpness of the wire cutters. Though they come sharp, I was surprised how quickly they dulled. A 14 gauge steel wire put a small dent in them. Admittedly that was a job for dedicated pliers, but it should be noted that 14 gauge steel is too much. The cutters still work great, I just don't use them for heavy gauge wire anymore. The legs of the tool rotate extremely well, it takes no great effort to move them, but it isn't so little that gravity will ever do it. The knife: The knife is a clip point blade of pretty decent sharpness. There is a hole near the base both to grip and pull out the knife, and to alleviate weight. This hole is clearly stamped and unfinished/unsanded. This is a general feature about this knife that I talk about later, but I am okay with it. The knife is made out of some form of high carbon steel. It does rust, and it rusts faster than the rest of the tool. This is not a huge issue for me, because I take care of my tools. The knife is sharpened easily enough, and isn't high maintenance, but it isn't stainless steel either. Every couple of months (unless you work in a high-caustic environment) give the whole tool a once over and you'll be fine. Screwdriver: The screwdriver is excellent, and I really mean that. It is my most used tool. It takes standard size screwdriver bits, but it comes with 8 of its own double sided bits. The bits stay in via a magnet at the base of the screwdriver, and it is strong enough not to let the bit fall out even when shaking it. I love the fact that you can rotate the screwdriver at a 90 or 180 angle from the rest of the tool, and it is implemented in the best way by locking it in with their new fancy locking system (which is awesome btw, super comfortable and one handed, do it with your eyes closed type system). Two items to note. The screwdriver does not let you keep a double sided bit installed when the tool is closed. A normal bit will work, but not the double sided ones that it comes with. All of the bits that come with it have their type and size printed on the side of that head. All the bits that come with it I have found to be pretty hard, but I have not stress tested them. The bits that come are a T10 (the tool takes this type for disassembly), T15, Flathead 2.5 & 4 & 6, Philips 0 & 1 & 2. The heads have their own little removable compartment on the tool case, which does its job well. File/Ruler: The file does a good job, nothing to complain about. Ruler is excellent, but I would have preferred a black ink as opposed to a tan ink, as it is on a silvery metal, so it can be hard to see in all but perfect lighting. Measuring with a caliper, I can say that the markings on the ruler are (at least to my eye), accurate up to 0.1 mm. Can Opener: Does its job well, is sharp, no complaints. Bottle Opener: My most used bottle opener, is quite good. It would take effort to fail a bottle opener, but it is done well. Its tip is a Flathead screwdriver, from what I can tell it is size 5. It eliminates the need for the double sided flathead bit that the knife comes with basically completely. I would have preferred a different double sided bit, but eh, no biggie. Awl: This is the first time I have ever opened the awl. I don't know what this is for. Uh, it looks fine I guess. It is often said that the least important part of a multitool is the awl... This is true. It has a stamped hole in it, not sure if that is important. The edge of that stamp is sharp, but easily sanded. Wood Saw: Its a wood saw on a multitool, if you need more that dowel rods cut, go get a bigger saw. I will say it is ight for sharpness out of the box. Obviously you wouldn't use this to cut down a tree (I mean you could, but you would only get like 4-5 small trees out of it). If you need something else cut, and you can't do a slicey job of it, I think this is one of the best wood saws I have seen on a multitool. The weird curvy saw: Eh, it is a weird curvy saw, see the clip point knife for more detail. Tool as a whole: Now to see the forest and not the trees; The knife is solid. It is fairly heavy, but that isn't an issue for me. I can say with certainty that this is not stainless steel. It is definitely steel, but not stainless. As a whole, I would say it is mostly some form of carbon steel. When I first bought this knife, about a month after I saw one of my favorite youtubers review this knife in a scientific stress test against other tools. He is really good, you should check him out. He calls this the Mossy Oak for the whole of the review, and it makes top 3 consistently IMO. https://youtu.be/Q9E2PjjdCAM?list=PLjT3B9r2z3fWwh2unOhjJ87HTSBnXEUyy&t=115 Now for the tools biggest weakness and strength. It is basically completely stamped. Make no mistake, this is a cheap cheap knife, but it is a *good* cheap knife. It does everything a fancy knife can do, often better. When I say it is cheap, that does not at all show when it comes to performance. It is cheap in that it is constructed cheaply, but that does not mean it isn't durable. When I say it is cheap, I mean that it is comprised exclusively of stamped steel (excluding screws). This shows in that every single edge is rough and sharp. They say this was sandblasted, and perhaps it is true, but it doesn't show. What can be said is that they compensate for this on the handles by lining them with rolled plastic, so it is very comfortable to hold, particularly for bigger hands. It is only upon close inspection and disassembly of the knife will you notice the shortcuts taken on it. Shortcuts are good. Shortcuts mean you can get one of the best multitools on amazon for $20. If you pick and choose where you take your shortcuts so that you are only taking them where it doesn't matter, you did good. This knife does that beyond well, and it is my first choice for multitool. Hard recommend.

This 21-in-1 multitool is compact, sturdy, and packed with useful features. The stainless-steel construction feels durable, and the tool has a reassuring weight without being too bulky to carry. It fits easily into a pocket, backpack, vehicle compartment, or toolbox, making it convenient to keep nearby for everyday tasks and unexpected repairs. The pliers grip securely, the knife is sharp, and the additional tools are useful for tightening screws, cutting materials, opening packages, and handling small maintenance jobs. The individual tools fold neatly into the handles, keeping everything organized in one compact design. It is especially useful for camping, fishing, household projects, automotive emergencies, and general everyday carry. I also like that it eliminates the need to carry several separate tools for basic jobs. Everything feels secure when folded, and the multitool is easy to open once you become familiar with the layout. It would make a practical gift for anyone who enjoys outdoor activities, performs DIY projects, or simply likes being prepared. Overall, this multitool offers excellent versatility and value. It is a useful, well-made product that I am happy to keep in my vehicle for situations when a full toolbox is not available.

I've been using this multi-tool for the past few months and its been working great. It's got everything I need to when I'm outside. My bike chain came off while I was riding it and it came in useful with "rechaining" it and adjusting. I've used the knives a lot at work and it hasn't dulled yet, which I'm very satisfied with. The screws that magnetize on one of the pull out tool works great, even when I have to screw things really tight (not fragile at all, which I was nervous about). Overall, great product and worth the money. Keep some oil on you just in case it's not "smooth" enough for you, the tools are hard to pull out *sometimes*.

For $40 this is not a bad tool at all. I'm still wary about walking around with this, "freeze, he's got a knife arrrrgh!" But I find myself wanting to use this, and learning to take it with me.. So what would you the urban everyday person use this for? There's 4 , well okay 5 major tools. The knife, looks very cool, for quick cuts, box cutting, the other day I used it for that as well as cutting enough thread to do some sewing. The file-for filing and I believe you can use it for the flint fire starter that comes with this The Scissors - Note, you'll need to fool with this, it needs to click then it works properly. I use it for a sealed lunch item as some of the packaging isn't each to access. The bottle opener, root beer, beer, always handy. The Saw, one heck of a tool, I haven't used it yet, but you never know. The bits that come with it, snap in only one way (the bigger opening). I do use the Awl, I had a problem most men my age would be happy about, I had to punch a hole in my belt because my belt is too big. Great kit, I recommend when you get it, take some time, learn how to open it up, so it becomes second nature when you really need it. 2 on each side, learn where the release buttons are for 5 tools the ones I mentioned, the awl and a few other tools do not snap to, so you can put them back. Note I suspect this is just an import company and they don't make the tool, it's a Chinese co that uses 2-3 different brands out there because I've seen the same exact set 2-3 times in Youtube. I have not yet tried to put this on my belt, I should to see how it feels and if it's something I can get used to when I need it. Overall a very handy tool. Everyone should own one of these, keep it in your car or wear it. Also pair it with a flashlight (rechargeable usb-c so you can charge it when you drive) and I'd also add a decent first aid kit: Band aids Snake bite kit Meds that you can take (check w your dr). Aspirin, Tylenol, Tums, or Pepto Chewables. Foot wear, change of socks. And always Water Especially if you live in California Former Corpsman w US Navy, just basics along with this. Also remember to not go out alone if you're new to hiking, we had a buddy system in the military and you should too. Enjoy the kit! Comes in a box and quality case with bit holder, you may want to add a few toothpicks and tweezers.

Got this after a nail in a tire on the side of the road. A trucker stopped, pulled it out with a multitool like this, and plugged it for me. That moment sold me on having one of these ready. This 21-in-1 feels solid and hefty in the hand. Way better quality than the price suggests. Stainless steel construction, good weight, and the pliers lock up tight. Everything opens and closes cleanly without the usual cheap multitool flex. I now keep one of these plus a plug kit in each car. Peace of mind is worth it. Highly recommended if you want a reliable everyday tool that won’t fall apart the first time you need it.

Honestly better than a leatherman. Knife is much sharper and retains it's sharpness.. and a lot more tools for the money!

Surprisingly well made. Took this knife out for my Wildland firefighting trip, and during that time I actually used every single tool except for the can opener. Very versatile, and has in if everything you need for a wilderness scenario! This multitool did not disappoint me at all; and the ferro rod came in handy as a tamper for my pipe which was entirely unexpected. Would buy again 🙌

I have been using Multi tools professionally for nearly 30 years, all day every day on the job. Leatherman has been my favorite, and Gerber second. But, I have a tendency to eventually lose the tool. At one time, Leatherman was affordable enough to replace if you lost one. But, as of late, that's now a painful endeavor. At one point, anything but the name brands was junk, but I decided that had been on the market long enough, maybe someone was making a quality tool without paying for the name. So, I came to Amazon and started looking at reviews. After some research, I decided to take a chance on this WeTol tool. I have not put it into service yet, but For the money, it's a solid tool. With a little practice, you can extract the knife with one hand, like with the Wave, and a few other Leatherman tools. It's built solid and tight. Ergonomically, it seems useable, but not as comfortable as the high dollar units. There were a couple places the manufacturer came so close, but just missed it with the quality. In the photo, you can see that on the back of the file, they have a ruler. Nice, BUT... as you can see, they start both zero centemeters and inches about 1/16" from the end. So, you can't put the end of the ruler against a corner and read the distance out. I plan to grind the end to the zero mark and solve this. But, it should have been made that way. The other issue is, you cannot close the bit holder with a bit in it. They are too long, and they hit the blade lock release lever. So, if you need a Phillips, you have to open the holder, fish out a bit from somewhere, put it in the tool, do the job, remove & store bit, and close the holder. All those steps take away from the reason for using a multitool. I didn't like that I can't close the hex driver tool with a bit in it, so I took a standard 2" Phillips bit and used my grinder to cut ½ inch off the back. Now it's 1½" and I can leave it in the tool & close it. I may go back and grind the back end into a flat head to make it reversible, but for now, there are 2 other flat heads built into the tool, and I can use the back as A ¼" Allen wrench. You can see in my other photo, that it now closes nicely. Overall, for the money, it seems to be a great investment. It could have been a major contender with just a little more effort, but, if it proves itself in the field, I'll probably buy another when I lose this one.

Excellent Wetols Heavy Duty 3-in-1 Staple Gun!! Very versatile, so easy to use. Adjustable for deep or shallow penetration Best staple gun I have use. Old one just the staple one, n did not last long Highly recommend this product from USA Now proudly displayed in my garage Peg Board

I was disappointed to see that it doesn't hold a full strip of staples so you need to refill twice as much

ليس مرن في الاستخدام هناك صلابة غير عملية

bulky but good

I like this item, it does not contain too much oil and is working perfectly. Lots of tools and utensils you can use. An absolute necessity for a car.