Hornit CLUG Bike Clip Indoor & Outdoor Bicycle Storage Rack & Mount System, 5 Sizes, Easy to install

The shear simplicity of this product is ingeuinus and exquisite. Its beautiful and sleek design allows this product to easily surpass competing merchandise in the fact that it is both extreamlly effective and virtually invisible when not in use. Any one that wants a cool and practical way to display and store their bike would be smart to consider this "Worlds Smallest Bike Rack". This is a product well deserving a spot on store shelves. Also a lot of people have shared different flaws with this product that just simply aren't true. For example the bike will come loose after a couple of days do to the release of air from the tiers or that the CLUG itself will come apart. I've been using this wonderful product for about 6 months and have at some points left my bike CLUGed for a couple weeks. I concur unless your bike tires are flat to begin with it won't lose enough air pressure to just simply fall over. As far as the club itself coming apart that's just the person being too rough. This product works just as advertised and will give you a very satisfying way to store your bike. Thank you LifeStraw

This is the third one I buy of these for 3 different bikes over the years. They work great, are super simple and easy to use and look minimal and clean. I mean, the mtb x-large is massive in comparison to the road bike, but it has to be. I am a bit sad that it didn’t come with a back wheel wall protector like the road bike size does but I’ll figure something out.

The advertising content for this "worlds smallest bike rack" is alluring and attractive to watch. It drew me in and convinced me that I needed this rack. I was excited when it arrived and had minimal issues installing it in a permanent location. I have five bikes, two mountain bikes-Specialized and Gary Fisher. I have two neighborhood cruisers-Trek and Euro. I have, most importantly, a Lightspeed Tuscany road bike with 700 X 23c tires which are extremely narrow. I can carry this bike around the house with two fingers, that's how light it is. According to the statistics my tire should fit perfectly. Well, a short time after installation and application I heard a crash from another room, rushed in and found my new Lightspeed on the ground. Seems my tires were just skinny enough to slip their way loose. Seems not all sizes of tires fit perfectly in each size clip. This is where I make it get better. My simple solution-for this bike and now for all of my CLUG Clips, for both street and mountain bikes-is this. And I hope Hornit is listening and considers this as an improvement for the future-and maybe rewards me as may be appropriate. I took a few strips of velcro and wrapped them around the Clip, screwing them between the rear of the Clip and the wall. Now, once the wheel is in place I just wrap the velcro strips around the wheel and no more issues with slippage and falling out. No more worries about expensive bikes crashing to the ground. So how about it Hornit? What do you think of this fix? Where's my cut? Well, even if I don't get paid it's worth it if it saves the life of just one bicycle...

Purchased this as a minimalist solution to bike storage in a very small bedroom (pics attached). Installation is wonderfully simple - I used the included template to mark spots to drill to put small holes for the drywall anchors. Tap in the drywall anchors with a hammer. Then take a phillips head screwdriver to put the screws into those. It holds the bike as designed. The tires shown in pics are 25mm Continental Gatorskin tires but I feel that 23 or 28 would also fit fine in this size of CLUG. It seems to hold securely enough, but my only critique/concern during installation is that the drywall anchors felt like they were going to bend or break when tapping them in, I wish they were a bit more substantial/sturdy so that the apparatus felt more secure in drywall. I would recommend you put this into a stud where possible thus bypassing the need for the plastic anchors entirely, but that wasn't an option for me. If it rips/falls out in the future, I will just have to grab a couple new drywall anchors and move it over an inch left or right in the same wall. In short, buy this.

I got the roadie and mtb Clug. The roadie is amazing. Super quick to install and easy to use. I had more issues with the mtb Clug. With the mtb Clug I can't push it in even though my tires are within the range. It may be because my tires are brand new. I have to remove the black interior of the Clug, place it on my tire and then I pop it in. I can pull it out of the Clug fine from the wall but just cannot push it in. It's not that hard to do my work around so I'm not complaining. No issues at all with the roadie.

Bought one 2/15 - broke on 8/16 - no heavy use - 25mm tires in the road version. Contacted for a replacement they indicated they would replace it but that is went contact stopped- haven't heard a thing in almost 3 months. Pretty expensive for something that only last a year. When it was working I did like it - it was very handy and space saving. UPDATE 11/22/16: I re-contacted support and they are sending a new one so I have up'ed the review by one start.

I bought the Hornit to keep my bike upright (I'm clipping the front tire on it while both tires on the ground, horizontally) in my condo and unfortunately it was a disappointing purchase. For starters, there is no room for error when drilling holes for this thing. I was about a millimeter off on one of the screws and had to drill a larger hole in order to get the screw to line up with it. And the size of the hole you need to drill is much bigger than I had anticipated...Also, one of the screws I received was defective so thankfully I had one laying around that I could use. My bike tire is 32mm so I purchased the smallest Hornit after reading a review that said it would be better to have it snug than too loose. With my tire right on the edge of the small one and the next size up, I just don't think it's fully compatible with my bike. It takes some force to get it to clip in and once it's clipped, if I tip my bike over a few inches, it falls right over. Maybe the next size up would be better but I'm concerned that one would be too loose. I guess it will sort of do it's job as long as one handle bar uses the wall for support. I can't imagine that this thing could hold my bike up if I was trying to prop the front wheel up to hold it vertically. My bike is a Giant Escape so maybe it's just too heavy for the size of this clip. It's definitely overpriced at a $20 price point. $10 would be much more reasonable for a small piece of plastic and two screws.

Honestly, I'm pretty clumsy and aggressive when I plop my bike up onto the wall and into this storage clip, and it's withstood the test of time! Great easy way to store a bike in smaller spaces (e.g. my apartment). Pretty happy with this purchase!

Tolles Design, tolles Produkt, einfache Montage! Ich würde es jedem empfehlen, der eine simple und unscheinbare Halterung sucht! Klares Must!

El producto cumple con su función perfectamente. La rueda de mi bici es de 25 y se adapta perfectamente. Echo en falta que venga alguna pequeña pieza para que la rueda trasera no toque la pared y no la manche. Yo he tenido que poner un cartón que no es muy estético.

Ottimo supporto per la mia road bike. Se si monta come si deve la bici non muove per niente! NB: La ruota posteriore deve essere ben attacca al pavimento.

Sehr gutes Produkt, sehr empfehlenswert. Praktische Montage, gute Erklärung, sehr funktional, robuster Eindruck , Montagematerial,ist mit dabei. Würde ich jederzeit wieder kaufen

Tras 5 años de uso todo perfecto. La bici nunca se h caído