Thirsty Rhino Badak Bottle Opener and Pour Spout Remover, Brushed Silver (Set of 2)

I’m a bartender and use this thing constantly.I bend the tip about 20 degrees at the hole where the cap goes when you pry it off. This bend gives you a more favorable angle to get better leverage to pry off the cap, and it requires a more shallow angle to engage the cap, meaning you don’t “miss” as often.However this opener works fine without modifying it, I just firmly believe that a slight bend in the pry-off section of the bartool improves the functionality. You have to be careful not to bend the tip too far because it over torques the bottle and will actually cause the glass to break instead of popping the cap off. This will happen if you bend the tool so far that the pry-off mechanism engages the glass rather than the metal bottle cap. I’ve seen it happen several times, only with this style of barstool that I had bent too far. Turns out about 30-45 degrees is too big of a bend. Makes the cap super easy to engage and pry off, but also becomes very easy to break the lip of the bottle off inside of the cap, and, as a bartender, you can’t be handing someone a beer bottle with jagged broken glass at the top. If you bend your bartool, take my advice and don’t over do it.Pour spout remover is a must have feature of any good bartool. This design is the one to get.

I bought this to help remove the pour spouts off bottles more quickly when working. It does the job well. It’s sturdy so it will last until I eventually loose it. This is a must have for bartending.. I only wish that it came in different colors or designs so it could be a little cuter.

I like the thickness and sturdiness of this. Happy with my purchase.

The product work exactly as intended. Pour spouts are a dream to remove with this tool.But out of the box, all edges are unfinished and will cut you if you're not paying attention. A quick once-over with some sandpaper takes care of this, but it would be trivial for the manufacturer to take care of this to protect their customers.

I use this item nearly every day, very sturdy. No complaints. I have not used any brand names with similar features, but this one does great for what it advertises to do. some pour spouts are trickier than others, but this guy gets the common ones easily, the larger Yellow ones are too big for the opening to remove easily.

The edges are a little bit sharp, so I used sand paper and rubbed it smooth. But very easy to use

This is exactly what I was looking for - but they *WERE* sharp. I had planned for the possibility and purchased cut-resistant gloves and sandpaper to ease the edges of the pack down. I cut a few sheets of sandpaper while trying to sand these, so definitely pretty sharp. It took a few minutes to get them each sanded down, but for all 12 it was about 45 minutes total. I cleaned them off with brake cleaner and the stickers I bought stuck with no problem at all.

It’s sleek. It’s study as hell. It holds up during late nights on Beale Street. 😈 Love it!