Thermaltake View 51 Motherboard Sync ARGB E-ATX Full Tower Gaming Computer Case with 2 200mm ARGB 5V Motherboard Sync RGB Fans + 140mm Black Rear Fan Pre-Installed CA-1Q6-00M1WN-00

After looking through multiple cases for my new PC I finally decided to go for this Thermaltake View 51 TG Model... It is giant so if you are looking for a mid-tower or something small look elsewhere lol... This has 4mm thick tempered glass on top, in front, & on the left side... All items within it can be rearranged or removed such as I took out the HDD stand and the vertical gpu stand by that was my decision. The PSU gets installed in the rear compartment so u don't see it at all and the wiring can all be organized thru the multiple holes provided with thick rubber grommets. It has provisions to mount fans on top, bottom, & on the side (which either exhausts or intakes air from the right side metal door that has holes built in with filter screens) It has a filter on the bottom as well. It comes with x1 Rear 120mm Thermaltake Pure 12 ARGB fan & x2 Front 200mm Thermaltake Pure 20 ARGB Fans. These 3 fans are pre-wired into a hub device attached to the right side of the case (behind the motherboard area) as u can see in one of my pics I uploaded... Unfortunately this means that you cannot control the RPM speeds of those 3 fans like you can with others you install due to this... The rear i have as exhaust & front as intakes and while they operate at a dedicated speed which isn't Max but isn't slow per say? They both work fine for me due to the extra fans I installed (x3 pack 140mm as exhaust on top, x3 pack 120mm as Intake on bottom, & x3 pack 120mm as exhaust on side thru the Radiator for water cooling) This is why I purchased all other fans and water cooling my cpu with Thermaltake Pure ARGB fans that are the exact same type as the 3 fans pre-installed... IF you wish to have your own setup with full speed control you'd need to replace the provided fans and install what you want (including if you want to upgrade to other Thermaltake brand fans like Riing etc...) I was fine with going this route... I can control all the other fans speed which are more critical and all fans connected Sync together with ARGB using the Gigabyte Motherboard 5v ARGB Ports & Gigabytes software Fusion RGB 2.0...Just a FYI in case you wanted more info about fans and rgb...The case itself is massive and sturdy and all metal... very easy to build in with tons of choices such as you can easily switch the rear slots in the case from horizontal to vertical if you want... I had no issues with this case what so ever and it is on the more expensive side but I think its worth it for the build I did?The only issue I would say is watch out when unscrewing the screws anywhere as they seem to have been installed via machine and may be difficult to remove without pressure from you... some might seem cross-threaded coming out and lining back up however all screws went back in for me no problem... the screw holes are just a little rough at times so remember to push in when backing out a screw with your screwdriver so u don't accidentally strip the end of the screw... As an Auto Tech this wasn't an issue for me but could be for those not use to stingy screws so be aware!It fit all my items as u can see from the pics including the Thermaltake ARGB 360 Water Cooling Assembly I installed on the CPU & on the side of the case that exhausts case air thru the radiator and out the back (right side of case actually) & it all operates perfectly... My case and cpu have yet to idle above 40°C nor reach any temps. Above 70°C "so far" with basic gaming? I have an AMD Ryzen 9 3900XT Processor Installed...Fantastic Airflow & overall terrific Case to build in!

I've been eyeballing this case since Thermaltake's announcement at CES 2020 and once it became in stock on amazon i did not hesitate to buy it . So my first case i got the tempered glass was shattered during shipping thanks to the ppl at amazon cause i don't know who thought putting this inside a box without a "fragile handle with care label" was such a great idea so i made a quick call to amazon customer service about the issue and the customer service rep was very polite and understanding and credit me with a $10 promotional credit. When i got my replacement i was very pleased on how the amazon shipped nothing was broken when i took the case out of the box.The main reason i got this case(view 51) was to replace my Thermaltake Level 20 MT case cause cable management was a pain and their is not enough space in that case. With the View 51 you have tons of space to route your cables and lots of options on how you wanna mount your parts and this case is really huge i was expecting it to be around the side of the Corsair Air 540(another case i owned and loved)but i wanna say its double the side of that. The case comes pre-installed with 2 200mm RGB fans and a 120mm at the rear of the case. You have the option to mount your GPU vertical with the GPU bracket they included but not sure why they didnt include the PCI-e riser cable especially the hefty price you pay for this case. This case was build with water cooler in mind(but your not obligated to do so if you have no interest in it) and i really like that on the top and front of the case you can remove/adjust the radiator mount for ez access when building in this case so Good job on that Thermaltake also on the back of the case theirs a spot were you can mount a reservoir if chose to do so.Building in this case is stupid ez lots of options on how you wanna build in this and this is prolly the 3rd cause i really enjoyed building in(1st Fractal define R4 2nd Corsiar Air 540). One thing i should mention is when your taking off the tempered glass cover on the top/front/door panel be extra careful cause you can break it really ez if you are not careful. Airflow is not a issue atall with this case plenty air can be transferred in and out the case unlike my Thermaltake level 20 MT with that being said The price for this case is pretty hefty but in the end its worth it i highly recommend this case!

This baby is large and gorgeous. Well built, everything worked as it should. Was looking for front panel full size case. Would definitely buy again

The product arrived in good condition, and additional parts were all there, but be warned that this case is massive. This is the third Thermaltake case that I have used for my builds and by far the biggest of them all. The only downside I foresee is the fan controller that comes with the case. I have read horror stories when it comes to using the stock fan controller. Either going to use another fan controller or possibly just replace all the stock fans with my own choosing. Also, I wanted to mention that the thumb screws were installed pretty tight so you may need to use a screwdriver to loosen them up. Either way, I'm super stoked that this arrived in good condition so I can begin my new AMD Zen 4 Ryzen build with custom water cooling and just in time for the new AMD GPU that is being released.