Guyker 6Pcs Guitar Locking Tuners (3L + 3R Handed) - 1:21 Ratio Lock String Tuning Key Pegs Machine Heads with Hexagonal Handle Replacement for LP SG Style Electric, Folk or Acoustic Guitars - Chrome

Very good looking machine heads, they do seem to be very well constructed, they all turn very smooth and precise, I was worried as some reviewers mentioned that the high E and B strings could slip, so I did check the end of the pin and they all looked fine to me, installed them on a IYV IP-300-TSB guitar and they have been working fine for over a week, no tuning issues, they look really nice. I made sure to get the correct version, so they were a perfect drop in, so install was a breeze, I am so impressed that I am going to get a set for Strat (2 pins instead of screws for affixing to the headstock) and put on my MIM standard... if all goes good, I will also do it on my Tele... Re-stringing the guitar took a couple of minutes for all 6 strings, and with the strings being cut very close to the peg, the headstock looks very clean & tidy. No need to pay for the brand name, these look & work great, and the price is very good.

I like modding budget guitars and these are my go-to tuners. I've used these on new Squiers, old Epiphones, and several random Asian built guitars (Indio, IYV, etc.). These are very good, well-priced tuners. Not Gotoh or Hipshot, but good tuners for my mods. Always better than what I take off. I'll keep using them. You should try them.

I have these on 2 of my guitars, one is an SG clone, and the other is an Ibanez electric acoustic. They're great tuners. Very smooth turning, holds their tune a lot better than stock. Very easy to install.

Great upgrade for my epiphone lp had to make the holes a bit larger, doing that didn't take much effort and I already knew I had to. The comment below talking about the high e not holding is not true I've put 3 sets of strings through these (trying to find what I liked) and all of them held you just have to look at the post and make sure you're pulling the tension towards the side that clasps onto it better I decided to sand two of them a little and I mean thousandths of an inch just to make the tip more flat basically creating more surface area for the string to find but I didn't have to just personally thought it would help.. they hold a tune fairly well and as you can see in the photos some of them don't even have a quarter wrap I think it looks clean and they are quick to tune. Make sure if you're tuning down to watch your strings and pull/form the thinner strings they can and do break if you're not careful. They hold tight on the strings and i haven't had any issues with them coming loose. I did learn to watch the hole as you clamp them just to make sure I got the strings firmly. I do recommend these if you're going this route (budget wise) plus these looks great and have slightly smaller knows than stock so they just look cleaner. Finally these are well built I've had them for about month playing a couple hours a day and I haven't regretted purchasing in any way!

I put these on a PRS SE Custom 24. The screw holes lined up just fine. I did have to reuse the screws from the old tuners as the new ones were too small. They are nice and smooth and the gear ratio is nicer than stock; more precise tuning but doesn't require that many more turns. The locking feature is very easy to use and seems to work great so far. I will probably replace the tuners on all my other guitars with these soon.

Fit perfectly on my Epiphone LP and the ratio makes it much easier to tune.

I used a set of these 3+3 locking tuners on the prototype for one of my recent builds, and there are some clear pros and cons: The Good - * The price is definitely great! * I really like the screw locks which hold the strings. They're extremely easy to use! * Once the strings are broken in (3 or 4 days), they hold tune quite well thereafter. * They look pretty nice on a guitar, and * They are fairly smooth for such inexpensive machine tuners. The Bad - * One of the six bushings on my set was very rough to get it threaded onto the tuning peg, and it was excessively tight to turn. It did not strip on me, thank goodness, but that was my fear the whole time. * I said above they are smooth. That's so long as you're tuning in one direction (tightening string tension, for example). As soon as you reverse direction (loosen string tension), there's very noticeable play before it catches on the gear again and resumes smooth movement. A higher quality tuner has no play in it. * The tuner with the tight thread above also has an extremely tight turn to it. Ironically that one is on the high "E" string, and I'm always thinking it's going to snap the string which it did with the first .09 I put on. So far the second .09 has held up. Time will tell, but I'll update is anything changes.

I have installed these tuners in 6 guitars at this point. Each set fits great and works perfectly. A great upgrade over stock cast tuners.

As many buyers I presume, I start by looking at the bad reviews and it of course got me worried! Well, I'll tell you now, I have only good things to say! Installing is super easy, didn't have to drill, screw holes aligned perfectly. I measured and they geniunely have a 1:21 ratio, precisely. The main reason for changing the original locking tuners on my Ibanez - other than the ease of putting on new strings - was that I hoped to improve the tuning stability. The current Ibanez tuners would go drastically out of tune after a playing session or even over night...not anymore! 🙂 Despite it being winter now, meaning that the differences in temperature are really high between when the heat comes on and off at night, it stays very much in tune! (of course a very slight tuning is always necessary, as it would with any guitar tuners, but it's very much playable immediately). At this price point, there is definitely nothing better and I wonder if there is really any worthy improvement with some of the more expensive and established locking tuner brands out there?

Look great and nice tuning action.

perfeckt

eccezionale

Muy buenos bloqueadores, aunque el color a mi parecer no eran tan dorados como el puente de la misma marca Aunque investigando más creó muchas guitarras que manejan clavijeros dorados son de ese tono de color