VisionRGB-E2s Dual Channel HD Capture Card

Description

The VisionRGB-E2S has two complete capture channels supporting up to 1920 x 1080 DVI or 2048 x 1536 Analog resolution. The VisionRGB-E2S captures the Analog/DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming. When a Datapath graphics card is used, the VisionRGB-E2S transfers the data directly to the graphics card thereby increasing performance. The VisionRGB-E2S sends the relevant portions of each captured image to each display channel and instructs each channel to use its graphics engine to render the data. This fully utilises the hardware and dramatically increases performance. When the RGB/DVI data is displayed on a non Datapath graphics card, the VisionRGB-E2S sends the data to system memory or direct to the graphics card, dependant on the software used for display. The VisionRGB-E2S is an ideal solution for applications that require the capture of Analog or DVI sources in real time. Typical applications include: Industrial/medical equipment, cameras and other video equipment Streaming video applications Video Wall Controllers SPECIFICATION BOARD FORMAT PCI-e x4 half size plug-in card, 110mm x 170mm PCI-e bus master with scatter gather DMA CONNECTORS Two DVI-I type connectors MAXIMUM SAMPLE RATE 170Mpixels per second analog RGB or 165MHz DVI Analog modes up to 340MHz pixels clock can be captured using dual-pass sampling MAXIMUM DATA RATE VisionRGB-E2S 650MB/s VIDEO SAMPLING RGB: 24 bits per pixel / 8-8-8 format VIDEO CAPTURE MEMORY 64 MB, triple buffered ANALOG RGB MODE SUPPORT 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 1080, 2048 x 1536, and custom modes DVI SINGLE LINK MODE SUPPORT 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 1080, 1920 x 1200, and custom modes HD MODES 1080p,1080i, 720p, 576p, 576i, 480p and 480i using a Component-DVI connector (HDCP not supported) INPUT MODE DETECTION Automatic detection of inp