FastRack Bottle Rinser (Sulphiter), 1-(Pack),Multicolor

My least favorite part of homebrewing is bottling. Cleaning and sanitizing bottles is excruciating if you have to soak bottles, scrub them with a brush, rinse them, then flush them with sanitizer. This makes that entire process so much easier.Fill the bowl with hot soapy water, spray the insides of the bottles several times, rinse, then switch to sanitizer and water and repeat the process. Put your bottles on a drying rack and move on to bottling. I haven't had to use a brush since I got this. It even dislodged a small patch of yeast in the bottom of a bottle that was missed the last time I washed bottles.I'd recommend it.

I recently started brewing my own beer and before I first bottled I somewhat dreaded what a chore it appeared to be, but since I couldn't afford to keg at the time I had to make due.I knew that my bottles had to be as clean and sterile as possible, and looked for a solution to help cut down on some of the work. I read about using a bottle rinser as a great way to sterilize bottles after they have been scrubbed, so I decided to buy this along with Beer Bottle Tree (45 Bottles) On bottling day I set up the bottle tree with the bottle rinser on top, and using a Starsan solution was able to quickly sterilize enough bottles for all of my brew, and my fiance even said that it was fun pumping the bottles on the rinser and watching the water spray up. At the end of the day it was quick to disassemble and clean, and stores easily.There is definitely a lot of equipment out there for brewing, some less useful than others, but this is definitely not one of them. If you're serious about brewing and bottling your beer then I highly recommend getting a bottle rinser along with a bottle tree to make bottling day a little less of a chore.

We have switched from using plastic water bottles to using glass and that was challenging to wash and get cleaned until we found this product . It works well cleaning and disinfecting our glass bottles I live this product !

When i first opened the box i thought ' is this really it ? 'The outer plastic feels very heavy duty, but the inner 'pipe' felt cheap. BOY WAS I WRONG, so far this has cleaned over 300 bottles and is showing no signs of wear and tear.My only complaint would be that the bowl / resevior is a bit shallow since my sani rinse tends to foam up, but that is an easy fix problem by just scraping out some foam and adding more sani rinse.If you are a bottler, i can not recomend this product enough, it saves SO MUCH TIME during bottling day. just 2 quick pumps into an already clean bottle, and you are good to go.I have not used the carboy attachment for it so i can not say if it works with carboys.Have cleaned 12, 16, 22oz bottles on thiswill be trying to sani 32 and 64 oz growlers next time.

I don't have the setup for kegging so I need to bottle my beers. Sanitizing 40+ bottle with a spray bottle can get kind of tiring. With a spray bottle you need to squeeze a couple of time to make sure you coat the whole bottle, after a while your hand kinda hurt.This units works a lot faster and better ergonomics on your hand.The plastic is not extra heavy duty but it is thick enough to use without cracking like some of the pictures that I've seen. Unless if you abuse it, it should be fine.I was not able to mount this on my bottling tree, I am not sure if they are brand depending or not. It would of been nice but I have no problem using it on the table or any other solid surface.Overall this is a great product to help make brew/bottle day more enjoyable.

I think the headline said it all. What took standing over the sink forever bottle brushing to clean and the sanitizing now takes a fraction of time…and no sore back. Happy wife…happy life. And for 19 dollars

It works perfectly. I didn't have any issues with putting it together that I've seen in some of the other reviews. No problems with the spring at all. I used StarSan to sanitize my bottles and it got pretty full of foam after doing a case of bottles so if you're doing a full 5 gal-worth of bottles then be careful how much sanitizer you put in there. I don't remember how much I put in, didn't measure, so I couldn't say how much I used. I did worry about it breaking as it seems a little fragile. Could have possibly been influenced by seeing the reviews about it breaking. It wasn't super expensive so I'd just buy another if it broke.

Didn’t fit well on my Fastrack bottle dryer so it will be used on a table base. No instructions, didn’t work until I primed the white plastic part. After priming, it worked and I was pleased in how it functioned. A higher quality would be even better. If top part screwed on to Fastrack dryer (tree) it would even be better. I’m not overly disappointed, form, fit and function could be improved.