1.5" Leveling Kit for 1980-1996 F-150 / Bronco 4WD - 9265

Used on 94 F150 2wd. I like these coil springs, not quite level but close enough. Ride is better and install fairly easy. There's videos online if need more info.Used moog camber bushings. K8976. They are good for up to 1.5 degrees on 2wd. I installed them at full 1.5 degrees. The slot on the bushing will be facing away from you, 12 o'clock position as you are looking in the wheel well. After installed the camber appears good, tires sitting square on ground. However you may still check alignment as needed.Also installed ENERGY SUSPENSION 90-96 Ford Bronco Front Coil Spring Isolator Set. # 4.918G. 2pc set. The isolators fit under each spring and help seat it, plus prevents metal to metal noise / squeaks.Hope this helps. Be safe and enjoy the ride.

Little bit of a pain to install on my own but only took me about an hour or 2 total. Brought the front end up significantly and gave me the room for the bigger tires that I will be putting on. You absolutely need to have an alignment done after installation.

Showed up on my porch WAY before expected, wasn't hard to install. Only thing that is a bit tricky is tightening the bottom bolt that holds the spring into place (you'll have that issue with any spring). I didn't even have to take the wheels off to get the springs on. I decided to buy a bigger jack and I didn't even need a spring compressor to fit the springs into place. I recommend doing shocks and springs at the same time while you're under there. I didn't measure anything but it looks and feels about 1.5" higher. Rides a bit better, not too noticeable for me. I'm running 31x10.5r15 BFGs and they have tons of clearance; I don't think 33s would be a problem at all. Awesome product so far, I'm about 500 miles and 1 month into having them on and they've settled nicely, no issues. I'd highly recommend.

I bought them as stock replacements as my factory ones were sagging. They brought the truck up to stock ride height. They are about 1.5 in. taller than stock. I was not expecting them to lift much more than stock going into buying them so I was not disappointed. They seem to fit well. I work in a shop so did my own alignment myself after replacing them. They seem to give a firmer ride and now my camber is much better which is why I got them in the first place so there ok in my book.

The bends on the bottom are too large and the factory retainer washers aren't large enough to hold the springs. We ended up making new retaining washers our self. Good riding spring and leveled out a 95 f150 nicely

Great product truck rides great very good priced you can't beat it 1995 Ford f150 2wd supercab not level but looks great 31x10.50.15s

Fit my 93 f150 4x4 . BEFORE & AFTER

Had these installed on my 1993 Ford F-150 4x4. Shop didn’t have any difficulties installing them. Before the springs the height from the center inside of the front wheel well fender to the ground was 32.5 inches. After install it is sitting at 35 inches. The 28 year old springs must’ve really been worn out. Really glad to have bought these. Truck looks much more appealing leveled out. And the trucks ride is much smoother as if I got new shocks installed.

Need to buy the adjustable camber and caster bushings for this to work properlyOther then that it looks great

Ended up lowering my truck instead of leveling it waste of time and money