3M Ultra Headlight Restoration Kit, Contains Masking Tape, Light Sanding Discs, Wax Protectant and More, Use on Plastic Lenses Headlights, Taillights and More, Easy Heavy-Duty Restoration (39195)

My 13 year old truck had terrible looking headlights. They were only slightly yellow, but were so cloudy that you could no longer see inside the headlight. I saw a review on the YouTube channel Project Farm rating this as a good buy and decided to give it a try. It was not difficult to work through the steps (especially after watching a tutorial video online) but it did take me a bit longer than the 40 minutes stated on the box. But, it did a great job and it looks great! The finish is almost like new and I didn't need to purchase new headlight fixtures! I'd recommend this to anyone and I'd happily purchase this again. I have a minivan that's not looking bad yet, but when needed, I'll use this 3M product to restore those headlights, too.

Worked perfectly. The lights on two of our older cars (2007 and 2010 vintage) were very cloudy. They look almost brand new, plus the lights shine so much brighter when driving at night. Well worth the $15 and 20-30. minute effort (first one took me 30 minutes because did slowly, second one completed in 15 minutes). Easy DIY project!

Clean headlights were my little project during nap time and this kit made it doable for a tired mom. The steps are simple. I used the sanding discs while the baby monitor was next to me and watched the yellow haze disappear. Driving home from daycare pickup, the brighter lights made me really glad i tried it.

A pretty easy straightforward experience. It would’ve been 5 stars, but had trouble with the last step. The last sandpaper kind of got destroyed after the first headlight, as pictured. Still was able to get it done ✅

The kit did what it claimed to do. It polished up my 2015 Tacoma headlights and made them look close to new. However, be prepared to make many passes over each light with several attachments on a drill. This is the only way to get proper results. The kit has everything you need (except the drill) and explains exactly how to do it. Don't rush the process. It will take a couple of hours from start to finish if you do it properly. Kudos to 3M for a great product and great instructions.

When checking the oil in my daughter’s, 06 trailblazer I noticed her headlights were so yellow. She probably was getting maybe a quarter of the light coming out of it. Bought this kit thought it’s gotta help.Damn is all I can say now no no they’re not new but Man so clean and clear. They are almost like new now. Vision is gonna be amazing at night. For $22 can’t beat the price. Amazing works good. Doesn’t take long to do either using my Makita.

I have not tried every restoration system out there, so I cannot state that this is the best system, but I can tell you that this is a solid solution that you will be happy with.To level set, no restoration kit will ever restore your headlight lenses to factory new condition. But this one gets them close. For the same reasons, I cannot state that this kit is the best value, but I can say that anything that works well at any price is a better value than something that does not work well at a lower price.One of the chief complaints of headlight restoration kits is that the restoration does not last. That's because most of the kits out there attempt to "fill in" the scratches, and eventually that filler washes out, disintegrates, or whatever. This kit actually polishes the plastic to *remove* the scratches. As such, the process takes longer and is more fiddly. The extra effort though results in a better looking and longer lasting result.I bought this kit 2 years ago, and my headlights look as good as the day I finished using the kit.The results you will get will depend on your patience and your willingness to understand and follow the instructions exactly. Read the directions carefully, do exactly what they say, for as long as they say. I spent - if I recall - about 45 minutes on each headlight.- Your headlights will look much worse initially, and you may think you are doing more harm than good. Don't be paranoid. Complete the course, finish all the steps. Once you get through the first two grits, each step after that will look better and better.- The instructions will warn you to avoid lingering in one spot with the power drill. That warning worried me, but it's really easy to avoid, and you can tell when you're doing it right. Be gentle, don't push too hard, and keep moving.- It may also look like they haven't given you enough of the different polishing pads, but my headlights are huge and I had extras.- Mask carefully, because you will run off the edge of the headlights and you don't want to scratch your paint. If you wear down the masking tape, stop and apply more.- When it comes time to wipe on the polymer, again, do it exactly as they tell you. Exactly. You only get just enough to get it done and you only get one shot to make it look right. Make sure you are fully prepped before tearing open the packet.- Do this in a garage or in the shade.Anyway, that's my advice. You won't be disappointed with this kit.

Awesome product , I have used many kits in my time with different vehicles . This one uses a normal household drill , to remove old yellow colored lens , it looks brand new now . Plus I replaced the Headlight Bulbs , after using the Headlight restoration kit , Together it made all the difference . I would Highly recommend this 3M system !!!

Die gute Nachricht ist, es funktioniert. Insbesondere das Coating korrigiert die letzten Fehler, die im Scheinwerferglas noch sichtbar sind.Um genauer zu arbeiten, wäre gerade es bei einem größeren Scheinwerfer sinnvoll, wenn man mit den Schleifpads nicht so knauserig wäre. Schließlich kostet das Set dann doch einiges an Geld, aber zwei Pads pro Arbeitsgang mehr wären schon eine Beruhigung. Dazu halte ich ein Polierpad und eine Headlight Politur für sinnvoll, wenn es richtig gut werden soll.Mit den beiden Coating Tüchern kann man auch die Rückleuchten behandeln. Die Menge reicht dafür aus. Es macht also Sinn, die Rückleuchten vorab zu reinigen, bevor man mit dem Coating anfängt. Der beiliegende Gummihandschuh ist eine gute Idee und auch notewndig, zwei wären besser.Meine Empfehlung: Alle Arbeitsgänge naßschleifen.

Increíble resultado siguiendo las instrucciones.Es un poco caro pero merece la pena.Lleva tiempo pero si no tienes prisa y lo haces siguiendo las precauciones queda fenomenal

economico ed efficace!

This kit is amazing. I rarely write reviews but this restoration pack is phenomenal. It take a little bit of work, but the results speak for themselves. 20 year old Z4 headlights look like new!

Je n aurait pas cru à un résultat si parfait.Super facile à utiliserC était pour une polo 5, qui vient de passer le contrôle technique