AC Infinity, AIRPLATE S3 Home Theater and AV Cabinet Fan 6"

Absolutely love this product. So I currently have a large corner desk, one end of the desk is a cupboard which acts as the support to hold up the desk. This cupboard was evidently intended to house a computer as there's a cutout in the thin board at the back of the cupboard however, the temperature gets quite toasty in there so for a few months I used it just for my tool boxes. I then built a small media server/file server to run Plex and uTorrent 24/7 as well as handle backups for all my devices. I decided I wouldn't need physical access to this device often and since I wanted to leave it running 24/7 it had to go somewhere quiet and non-disruptive. So I decided to place it in this cupboard, I also put my xbox one and xbox 360 in there too, as well as my network switch and my new Linksys WRT1200AC router. So it's quite a packed cupboard but gives me easy access to the devices if I need to, without taking up precious desk space and causing an eye sore and an ear sore. The biggest dilemma with this setup was the heat build up in this cupboard. With only a small gap above the cupboard door and the small hole in the rear for cables, it didn't take long to heat up. Enter the AC Infinity AIRPLATE S7. I had considered doing a bit of a DIY job and simply re-purposing 2 computer fans and a mesh filter of some description and wiring them up and mounting them on the back of my cupboard but it all seemed a bit too much work as I'm not the best when it comes to wood work and soldering so I began hunting, I found the AC Infinity and it suited perfectly. It arrived with a small paper template to guide me where to cut and drill holes to install it, the fans etc. came pre-assembled so it was a simple case of drilling the holes and the cutout and popping it in, then plugging it in (via the USB power cable), switching it on and away it went. I plugged it into my xbox one initially since that was the biggest cause of heat so whenever the xbox turned on, the fans turned on too, however I decided I wanted to keep the cupboard extra cool for all my devices so I plugged it into my media server and It's been left on for over 5 months now without a single hiccup. The cupboard remains cool even with an Xbox One cranked up, a surprisingly warm router, and my media server all packed into a small side cupboard. The fans make short work of it and are nearly impossible to hear when the cupboard door is shut. The rear of the cupboard is just to the side of my bed and I can barely hear the fans, they are absolutely fantastic in terms of noise levels and also manage to shift a great amount of air whilst keeping quiet. I am so very happy with my purchase, if I ever build a small home theater setup, an AC infinity airplate will be at the top of my shopping list to keep everything cool and quiet. For this use I decided to go for the simple USB setup and not the touch screen panel simply because I couldn't be bothered cutting more holes. For my use case, I want it turned on and left on so the small screen was not necessary. However, if I were to build a home theater setup I would definitely grab the screen and mount it on the side of the TV cabinet. Again, cannot praise this product enough. If you've got a cabinet or cupboard, or even a drawer where you keep devices or items that get warm then this product is the one for you. Quiet, power efficient and very effective at cooling. Not to mention cost effective too!

Attention Tent Owners This is my third AC infinity product. I have previous purchased two ac infinity intake/outtake exhaust fans which btw are great and still in use one year later. My purchase: Ac infinity dual fan wallplate/airplate with the switch non-controller version. My application: pull cool air from the room into a 3x3 to keep the plants inside at optimal temps. Normally temps inside are acceptable at 80-82 degrees, but in flower I want to get several degrees lower to simulate fall/harvest. Why I needed it? I use an LED that at its highest settings putting off quite a bit of heat into a small space and although a great LED, too big for the space (bigger isn’t always better) so I was having difficulty dialing in temps even in my mostly automated small space. Full disclosure - I’ve purchased more than my fair share of fans over the years from amazon and other big box retailers. Some I still use, some shelved, others recycled or returned. Rather than setup a proper intake using another ac infinity intake I went ahead and tried fan after fan propped against the side of the tent with the flap open to force cool air in. Btw the inexpensive Amazon basic floor fan pushes a lot of air, but I digress. And This method works, but adds additional noise and light leakage both in and out of the tent (night/day). As you know, this is a problem and will result in confused plants or worse, herms. That said, I’m still lazy, seeking the easiest cheapest way and I’ve been so pleased with my other ac infinity products (I decided on this unit after measuring my tents side mesh window which was close enough) it was an easy decision to take a flyer on this dual fan airplate. This fits my 3x3 bottom mesh vent exceptionally well. I didn’t even have to use the included screws or zip ties that’s how snug it is. Perfect even. I simply used a boxcutter to cut out the mess in my tent and forcefully pushed the plate into place. This admittedly took some extra elbow grease, but once i got it in, I’d say its the middle cup of porridge, just right. This airplate on its highest setting I am able to keep my homes air set to 70-73 and allow for cool fresh air to enter the airplate/tent and force the hot air generated from my LED out of the top. My ac infinity outtake fan is pulling that hot air set on low with a controller (setting 2) through an oversized filter from another company to filter any smell (none) back into this spare bedroom. Added some pics. I opted to go with the non-controller version of the dual fan airplate as I have two other intake/outtake fans (ac infinity) with the controllers and thought it would be overkill. The airplate has a small switch on it with 4 settings. Off, low, medium & high. On high, it’s quiet and mostly unnoticeable and pushes enough air into tent to keep the perfect temps! Surprised me for an airplate that it was able to push as much air in as it does. Pros -perfect size for my application -quiet even on its highest setting -always on feature (using a smart app controlled outlet to turn off and on) -moves more air than expected -great engineering as usual Cons Not sure it’s a con, but it would have been better in white rather than black and without the controller I don’t know if it was possible to push even more air in on possibly higher settings. White was unavailable. That’s it, hope this helped some folks. Thank you AC Infinity

Super quiet and super efficient! easy install that looks great. Could not ask for more. it also included a 120V USB power block.

I bought the AC Infinity AIRPLATE S7 cooling fan system for a DIY cat litter box ventilation setup, and so far it has worked well for what I needed. The fans are quiet, which was one of the biggest things I cared about. I did not want something loud running in the background all the time, especially for a small home project. The airflow is good enough for my setup, and the speed control is useful because I can adjust it instead of having the fans running full blast all the time. The build quality feels solid, and the unit looks clean once installed. It is made for home theater or cabinet cooling, but it also works well for DIY ventilation projects if you need controlled airflow in a small area. Installation was straightforward, and the functionality is exactly what I needed. For value for money, I think it is a good buy. It is not the cheapest fan setup, but it feels better than trying to throw together random cheap fans and hoping they last. Would I buy it again? Yes. Good fans, quiet operation, useful speed control, and it worked great for my DIY cat litter box fan setup.

They are extremely quiet. Any other sound in the room will make it hard to hear these on their highest setting. They make mounting them easy. They also included the mounting hardware for the 3 most popular mounting options. I needed to switch between intake and exhaust functions, it was very easy. The grates will keep out the smallest fingers and look great.

I bought two of these for the cabinet that holds my xbox. I installed one near the bottom of the cabinet and one below the shelf - diagonally opposed. Installation was a little difficult as it required using my jigsaw vertically but that was because I didn't feel like emptying out the whole entertainment center and turning the cabinet on its front. The result was the holes were a little crooked but no one's going to see them anyway. After that, putting the fans in and securing them (I used the bolts because I didn't see the little screws included - should have used those) was easy. I plugged both fans into an AC Infinity thermostat, set the activation temp to 85 and tried it out. Works flawlessly and I can't hear any noise from the fans. Cooling is effective. Before the installation, my Xbox would have its own fan running at high speed and the temp in the cabinet was high. Much better with the fans. Overall very happy with them

Does a good job getting the heat out of my entertainment center and its not to loud. It has an extra usb port to plug into incase you your limited on your usb ports for devices

Got 2 of these for my media center. Keeps my Xbox cool. I paired it with the thermostat so it turns on and automatically. Very quiet.

As expected but not the best build quality

I bought this fan to rig up as a small kitchen exhaust fan in my tiny house. I needed something that would allow me to exhaust through an awning window and this fan attached to a board works really well. It sucks up a ton of humid air and pushes it outside quietly and efficiently. It was pretty expensive for what I was hoping to pay but the quality of the product is very pleasing. This product both functions very well and looks very nice. If it happens I need another one, I wouldn't hesitate to buy from this company again.

I installed this fan in the back of a custom made arcade cabinet which needed to be kept cool. The fan is incredibly well made and very reliable, which I guess you'd expect given the price tag. Whilst there are cheaper alternatives that would presumably be just as effective, the AC Infinity fan simply cannot be beaten on looks which give you cabinet that professional appearance - to me that was an important part of my project so I was happy to pay a premium. The fan comes with a plastic template which helps with the positioning of drill holes, which was very useful indeed. The fan runs on a 5v power supply via the attached USB cable and is happy with either a 1amp or 2amp supply. The package also contains a UK plug with a USB connection if you don't plan to power it from an existing 5v powered device.

This fan came well packaged and looks very professional. It came with all the hardware to mount and power it. This blower has a really good flow rate which can either be controlled via the online speed controller or if it's connected to one of the AC Infinity controllers. The higher the fan speed the louder it will become. That said even on maximum speed I wouldn't say these blowers are overly loud. I would recommend these to family and friends for sure.

Used as a "through wall" fan for my office. It is more quiet than my computer fan. I installed it in series with a wall switch, a controlled 110v outlet, and a USB DC converter. The cable and 3-speed selector is hidden in the wall. would have preferred that selector switch to be right on the fan, that would have simplified installation. But I didn't find any such product. So I am satisfied, and I can breathe fresh air.