VEVOR Motorized TV Lift Stroke Length 39.4 Inches Motorized TV Mount Fit for 32-70 Inch TV Lift with Remote Control Height Adjustable 28.74-68.11 Inch,Load Capacity 154 Lbs

Pretty easy to install, though the instruction manual was poorly written. You should be sure that the mounting bracket is completely level before mounting the TV. The 1000mm stroke length allowed us to completely hide the TV behind our credenza and below a window sill. The base is heavy enough that the whole unit is stable without extra support for a 55" samsung smart tv. The kit came with M6 bolts for the TV mounts, but ours needed M8 bolts x 25mm, just as an FYI.

I designed and built a Computer desk where dual 21" monitors lift up out of the desk top surface. Looking back, I ordered a Vevor lift incorrectly, Customer service was helpful in taking that one back and shipping out a different lift immediately. Of course plastic was used in expediting this service. You need to know in advance (pre-order) how high you want your TV or monitor to go to. To do this, you need to take into consideration measurements of your screen (TV or monitor/s) total height, fastener mount position on the back of your screen, measure from the total desired elevated position to the fastening point on the Vevor lift. If your unsure its best to place the screen where you'd want it at its highest point, and then measure down to the mounting position on the Vevor lift. Example: VEVOR Motorized TV Lift Stroke Length 39.4 Inches Motorized TV Mount Fit for 32-70 Inch TV Lift with Remote Control Height Adjustable 28.74-68.11 Inch,Load Capacity 154 Lbs Fully collapsed or lowered, your lift and screen needs to be concealed under or inside your cabinet or desk. In the example description above, it gives you the total lowered height (Control Height Adjustable) of 28.74" that means your lift (by itself) will be 28.74" from the base to top of the lift. If your working a project with a cabinet height of 30" to the top, your screen may not completely be concealed once lowered. Which is why its important to know where the mounting position is on your screen. From 28.74" this lift will elevate (or raise) 39.4" further. So the 68.11" is actually the total height from the BASE of the Vevor lift itself. From bottom to top, completely raised. With this understanding, choose carefully, the lift that meets your needs both fully lowered and fully elevated as they come in a variety of sizes. Allow for some minor adjustments from oversight. If your lifting something heavy you should also look at the weight rating for the lift you selected, before ordering. In the above example, it is rated for 154 lbs. In the end, I have a cool desk, with an epoxy poured 3.6 feet by 6 feet long and when fully lowered, looks like a dinning table. I have the ability to lift my monitors well beyond my desired elevated height. Not intended. Just have to remember to stop it. I'm not using the included wired lift controller, only the remote. My project was a huge success, but the learning points about the lift, I'll pass on to you. Vevor sells a really good motorized lift system. Packaged very well. Took a bit longer to receive than usual. Very little assembly involved. Lots of mounting options for your screens included. I used the 4 point vesa system on the back of my monitors. The Vevor kit came with enough hardware for me to mount both my monitors with ease. Had to drill a few holes but didn't have to buy any additional brackets or hardware. I hope this knowledge helps you find the right lift for your project. Good luck on your project!!!

Easy to set up. Hardest thing is building a cabinet. It's really easy to set up the extend and stow height. It lifts m6e Samsung 60" TV no problem. It's quiet too. Very happy with the lift.

Assembly was fairly easy, but the instructions are poor at best, It performs as expected although it appears the memorized stops don't work with the remote. There are no instructions on how to program the auto stops

This motorized tv lift is great. Works just like the discretion says. I love it.

We retrofitted a portable bar by removing the interior shelves and legs, then braced the bottom before inserting this mechanism. It is PERFECT! The wires for the tv and WiFi run under the bed so no wires are showing. The cabinet sits t the foot of the bed and looks like part of the furniture until we hit the remote and the mechanism pushes up the lid. Love it! It’s smooth, quiet, and reliable.

Excellent!

This came very well packed and the instructions were very clear and easy to follow.