Invision Monitor Arm Bracket Mount for 24-40 Inch Screens VESA 75-100mm Ergonomic Height Adjustable Desktop Clamp Tilts Extends 2-15kg (MX450)

It’s a pleasure to work with something so well designed and well thought through. I was a bit daunted about putting this together, drilling into an existing desktop, to hold a relatively heavy monitor. However the instructions were super clear with clear diagrams and emphasis on critical things to note and “pro tips” to make the most of the product.The resulting setup works exactly as I had hoped and as described and I would 200% recommend this product.Things I liked:- sturdiness/ solidity (feels like it will last)- ease of assembly- clarity of instructions- range of motion- ease of adjustment (eg tightening or loosening the piston action)- good design eg things fit together the right way and I can’t imagine it is possible to put together incorrectly- value for money- cable management

After the disappointment of the first arm from a different brand... after reading reveiws I chose this one first impressions you can see it's quality the base clamp made of solid metal both arms are solid and sturdy.. instead of putting the base clamp to the middle of the desk I decided to put it on the corner of desk where the leg attaches to desk for better support..my monitor 34in curved wide screen weighing 6.78kg has bit of a recess and screws provided don't screw right in so had to put some packing behind face plate to hold it still as soon attached monitor to the arm it just held it in place no sagging I can have it in portrait or landscape mode,tilt forward and back,up and down ..the previous arm cost £20 and couldn't take weight of the monitor..this costs lot more but does the job if you're monitor is over 30in then you can't go wrong with this arm..if you're looking for entry level monitor arm then Invision is the way forward..

Excellent quality monitor arm, even the packing method was excellent.The unit is supplied with both 'clamp on' fixings and 'through desk' fixings so it gives you options.I opted for the 'through desk' fixing as my desk is against a wall and also has a cable managment tray so not much space to use the 'clamp on' fixing.Tip1: The instructions stated to drill a 10mm hole for the threaded bar but when measured, the bar supplied was less than 8mm so I drilled an 8mm hole for a 'snug fit'.Tip2: Before drilling the hole make sure you check underneath the desk for obstructions such as desk support brackets and cable managment trays. I forgot about my cable tray and nearly drilled the hole in such a place that it would have been in the tray which would have stopped the desk top sliding forward, oops.Tip3: When attaching the arm bracket to the monitor please be aware of any little open holes on the monitor case. One of the screws I was putting in comically pinged off and dropped into a hole not much bigger than the screw and disappeared into the monitor casing. 20mins of holding the monitor in various positions to get the screw back to a hole and then some surgen like skills from my wife with a pair of tweezers and the screw was out again. You have been warned.The monitor arm itself is excellent. Mine supports a Samsung 34inch curved monitor.The arm has great support and has a great range of positions, ideal if you want to switch from a 'work' position at a back corner location or a 'gaming' position at a centre front location.The positioning is smooth and easy and the adjustable weight function means you can set the right support for your weight of monitor.The cable managment built into the arm is very useful and keeps cables nicely out of the way.Tip4: When setting up the cable management make sure you set up when the arm is fully extended so you get the max length of cable required for all positions.The base of the arm comes with a handy USB port complete with cable. I found this useful for my webcam that sits on top of the monitor.All-in-all, very pleased with the purchase. Great quality, easy to install, great functionality and excellent value for the price.

I was looking for monitor arms that would be fairly flexible (as opposed to the more rigid "straight pole" one my smaller work monitor is on) and would hold the mighty, heavy chonkasaurus that is the 32" Samsung Odyssey G7; this one had good reviews, and although it was a little more expensive than some others that claimed to hold the monitor's weight, given the size of the thing I decided to go for the safer option in this.The box arrived with a huge dent in the side, and half the contents were already unwrapped, so I suspect I might have gotten a returned one, which is a bit disappointing having paid full price for it "new" but everything seemed to be present, so on we went.Assembly is quite straightforward. If you're looking to install with a big monitor like this, I'd definitely try to get a friend to help - I managed to do it on my own, but it's a nerve-wracking experience. However, the arm itself feels pretty sturdy and hefty, so I'm not worried it's going to suddenly snap.Most of the joints are fine - the gas-assisted lifting arm is really smooth and once I tweaked the tension with the supplied allan key, it works precisely how I would like. Raising and lowering the monitor easily.The one exception - and this is the reason it lost a star in my rating - is the tilt mechanism. Having finally got it set strongly enough to hold the weight of this monitor, it tilts forward (down) easily if you push, which is good, but tilting back up is incredibly stiff, and requires a two-handed grip (top and bottom) of the monitor and is very jerky and so hard to get into a precise position. (Tip: go a bit further than you want, then use the easier down-tilt for finesse of position.) It makes an alarming creaking noise when you tilt it up, like the bolt is really struggling against friction, and slackening it doesn't help because then it just tilts forward on its own and doesn't support the monitor.(Also, the bolt for the monitor tilt is so stiff to adjust that it actually wrecked the supplied allen key completely; I was fortunate to have one of my own in my toolbox which is a bit sturdier and was able to do the job, but beware of this.)So on the whole, it's a really good, sturdy, useful addition to your desk space. Just don't expect a nice easy adjustment on the tilt if you have a monitor with any real weight to it, which is disappointing considering I paid a bit more specifically because this one was rated to deal with such a weight level.

In my opinion this is a good product and at a good price. Be aware that it is rather large: the top section of the arm measures 12 1/2 inches from swivel point to swivel point. You need to have room for it depending on where it is installed. The monitor pictured is an older Dell 32 inch that weighs nearly 10kg. I was sceptical whether it would hold this but it does without problems. I've had it installed for a few weeks and the monitor is not sinking down at all. You have allen keys to adjust the tightness on the joints. The only feature I can't really use for a monitor of this size is the tilt. You have to tighten the joint enough or the monitor's weight pulls the bottom under and angles it toward the desk. This is not a fault of the arm. It means the tilt can be adjusted but it is a bit stiff. The instructions do warn you to tighten this joint when using a heavier monitor. In all other ways it gives great movability to the monitor and improved my workflow. If you need to sit further away from your desk you can bring the monitor forward. Because of the size of the arm you have a good range, more than I need personally. Angling the monitor horizontally (swivel) is easily done from the front and smooth. Moving it back or forward I do from behind the monitor. Doing so from the front is possible but awkward with a monitor of this size. This probably would be easier on smaller, lighter monitors.One of the other things I was wary of using it with a heavy monitor was the fixing to the desktop. As shown in the photo it is fixed using the standard clamp with no drilling or screws involved, and there is no play or looseness in the clamp when adjusting the arm. It feels rock solid.Installation:Good instructions are provided. For smaller monitors (<32 inch) you probably get away with single person installation. For mine it was a bit tricky since you are told to fix the arm in place before attaching the monitor. You insert the srews into the back of the monitor leaving enough space to slot the arm in, then tighten them up. For a large monitor it is really a two-handed job.In conclusion I'm happy with it and it has stayed in place to replace the original stand.

Was a bit worried that this wouldn't be that good, because the monitor arms with the good reps are really expensive, but this is great. Has transformed my desk, and I bought another one as I have two monitors. Possibly could have got the cheaper MX200, as my monitors aren't massively heavy, but I thought it would be worth spending a bit more to get the MX450 (this one), which seems a more quality arm all around, and I think I probably made the right decision despite it being more expensive.Installing it is okay, there's the usual bit of educated guesswork you have to do with most budget Asian products, and the usual having to read each bit of the instructions a few times before you realise how it works, but it's on the better side as far as instructions go. Nothing too weird in regards to how it fits together.You may have to move the desk clamp around a bit on the desk to find the best spot for your setup, and if you're not extra-strong you may need a friend to help you here (or else unscrew the monitor every time you move the clamp, which would be a bit laborious, but you may have no choice).It's a bit unclear as to which bolts you use early on, but if you do the wrong ones it doesn't mess anything up, you just undo them and put the right ones in. Good quality parts, strong and all in alignment. Note that there's two Allen-key adjustment points (up-down and tilt), this isn't that clear in the instructions.Overall, I'm pleasantly surprised and hoping I haven't jinxed it with this good review.

This purchase was unexpected. I bought a 34 inch ultrawide monitor as an Amazon warehouse purchase, but it came with an incomplete stand! After some discussion with Amazon they gave me a refund enough to buy this stand as a replacement.I had to mount this on the back of my desk, which has a steel frame and a glass top. Quite a common desk style. The clamp will not actually mount on such a desk directly, but I found that putting a piece of 2 by 2 under the desk I could use the clamp. This works very well. (I will post some pictures later). If you have a standard wooden desk top you will be fine. I found the 2 by 2 discarded at a nearby building site.Assembly was a bit harder than I expected. I think the instructions could have been clearer, but there are not a lot of parts so it all fits together quite logically with limited head scratching. I would still suggest the company make a trip to IKEA to look at how much clearer instructions can be.It works VERY well. Mostly I do not need to move the monitor around, but the arm allows for a great range of movement. Forward, backward, up and down and around. The monitor can be tilted too, but I think you should spend more if that is a feature you want to use frequently. The arm is large enough that I can make the monitor vertical if I want. I like that the monitor is not sitting on the desk -- it gives me a lot more space (my desk is small). It feels very sturdy.I give it five stars because I think that for this much money you could not expect anything better for a large monitor.

I ws struggling with just the one Monitor and so decided I needed another but how to present them on my 1monitor stand. after a little research I found these Beautiful Invision mounts., there is a dual arm option but i wanted the option to use more available space to adjust my arm as i wish. Having already tried a cheaper dual arm , that was supposed to carry two 32" monitors I discovered it was not able to hold the monitors forward without toppling over, they could only be held in as ingle static position.so I opted for two single arm brackets from invision rated for up to 49" screens..Although I did have help to assemble them , it was very easy to do and took just over an hour to completely change the look of my office space.Throughout installation I was completely happy noticing the massive construction in these brackets the sleek design , even had cleaner cable tidy option . What most pleased me was the ability to change the torque setting at the shoulder in order to make movement and positioning of my monitors very simple and fun. I was also lucky to have been able to purchase these now at at a small discount. But at full price i would say they are very much worth the expense.. overall rating in my opinion is PERFECT. k.earl

Ich habe mir den arm geholt, um einen 34“ curved Bildschirm von HP daran zu befestigen. Der Arm wiegt ohne Standfuß etwa 8kg.- der Aufbau der Monitorhalterung war kinderleicht und die Anleitung ist sehr gut geschrieben. Im Gegensatz zu vielen anderen Marken, liest sich die Anleitung flüssig und ist nicht voller Übersetzungsfehler. Das macht es bedeutend angenehmer!- die Halterung macht einen sehr hochwertigen Eindruck.- der Bildschirm wird in jeder Position perfekt gehalten. Ich nutze die Halterung, damit ich den Bildschirm hinter die Tischkante bekomme und dadurch mehr Abstand zu meinen Augen erreiche. Das funktioniert ausgezeichnet. Und der Bildschirm bleibt in der eingestellten Position.

It’s great when you have a good product so that you can keep the review short and simple. It’s holding a 40-inch monitor and works absolutely perfectly. Installation is so easy, even a minus 20 year old kid could do it.

L’ho comprato perché volevo togliere la base del monitor dalla scrivania e avere più spazio libero davanti a me. Dopo averlo montato posso dire che fa esattamente quello che cercavo.La prima cosa che ho notato è che il prodotto sembra abbastanza solido. Non dà l’idea del classico supporto leggerissimo e instabile. La morsa si fissa bene e, se montato correttamente, il braccio rimane stabile. Ovviamente bisogna regolarlo con calma in base al peso del monitor, ma una volta trovato il punto giusto si usa bene.A livello pratico cambia parecchio la postazione: hai più spazio sul tavolo, il monitor resta alla giusta altezza e puoi sistemarlo meglio rispetto a una base tradizionale. Questo per me è stato il vantaggio più grande. Anche dal punto di vista estetico la scrivania sembra più pulita e ordinata.Non è un prodotto da prendere a occhi chiusi senza controllare la compatibilità, quindi consiglio di verificare bene VESA, peso del monitor e spessore della scrivania. Però, se tutto combacia, secondo me è un accessorio molto utile.Nel complesso sono soddisfatto. Non è solo una cosa estetica, ma migliora davvero la comodità della postazione.

J’ai commandé de bras pour faire de la place sur mon bureau,Mais surtout parce que malgré mon jeune âge, j’ai souvent fort mal à la nuque en jouant.✅ avantages1) Depuis ce bras, je peux jouer 8 heures consécutives sans avoir le dos qui craque ou la nuque douloureuse 👌🏻2) l’installation est facile et l’a prit environ 2h en prenant mon temps et en rangeant mes câbles.3) j’ai un écran ASUS 24 » et j’ai descendu le torque du bras au minimum, il est donc maniable.Il ne descend pas avec le temps🖐🏻. Il garde bien la tension.De plus, il ne fait aucun bruit, il est très silencieux 🤫4) dans la vidéo je secoue le bureau (étant donné que les bras ont tendance à beaucoup bouger)Et malgré ça, mon écran ne bouge pas beaucoup.Le bras est très rigide 👌🏻❌ inconvénients:- Prévoyez de la place derrière votre bureau pour ne pas abîmer.- il y a un petit caoutchouc devant, je ne sais pas si il y a une possibilité d’ajouter un usb dans le pied,Mais je n’ai pas trouvé l’info.Cela dit, je ne le prend pas en compte dans ma note étant donné que ni le constructeur ni le vendeur n’en parle 🙂En conclusion: c’est un bon bras d’écran qui comporte toute les qualités que je cherchais et d’avantages.Il est de très bonne qualité.J’en suis très content et je le recommande. 🙂30/03/2024: l’écran n’a toujours pas bougé, le bras tient très bien 👌🏻Je le recommande vivement.

Good product. Easy to setup. Manuals are good.The only shortcoming is regarding the length of the arms, however, I am using a pretty big desk, so that could be normal for the monitor arms.I am using it with 32 inch monitor on a 12mm thickness desk.I would recommend this product