K-1028E Universal Air Conditioner A/C Remote Control for Haier, Hitachi, Panasonic, LG, Sharp, Gree, Midea, Bosch, Toshiba, Sanyo Air Conditioner Remote Control 1000 in 1

Takes a little bit of figuring out since the instructions have a typo in itIf your brand is not listed, you hold "set" for a few seconds then when you let go you will see the numbers on the bottom right corner slowly go up and cycle through 1-1000.You then need to listen closely the entire time to hear your air conditioner beep. But the numbers don't stop cycling after your air conditioner beeps so you gotta pay attention.Once the AC Beeps, then you press the up or down button to go back to the number that made your ac beep then press "ok".Then this means the remote is connected to the ACFor my confortotal ac , the code was 62

Very easy to set this remote with Amy Admiral and even there was no code for this . I just hold up and dow button on remote. After five seconds my air conditioner starts and I press ok botton.Working 👍 great 😊.

The instructions don't match the remote. It says press SELECT but there is no button that says SELECT on the remote. What a waste of money.

***Please read everything for more programming infoI still like this remote...But it seems about every 2-3 weeks for some reason I have to "reprogram" the dang thing! Why? I have no idea & there's brand new batteries in it(I checked while installed the voltage)The remote doesn't get banged around. I put a magnet on the back so it would stay in one place & not be hit\banged\moved or set wrong.Thankfully there's an auto search option(but watch using it, if just held down it goes in 10# sequence & skipping 90% of codes.I'm not sure if any of the codes on the instructions works.The flash light is USELESS!Clock fails to keep time(digital clock!)It would be great if the manufacturer had different color buttons!But this is worth the money given the ability to find a code for a 10-15 y\o portable A\C unit!**Some people are complaining about "No ENTER button"People please think about it..."SET or OK" is the same thing in foreign countries sometimes.Instructions for programming remote1.Hold down on "SET" to start program mode.2. Use the "Temp" up\down buttons to adjust between codes3.When you hear the BEEP write down the code(if you go too far you can use the down temp to get to correct code)4. I go through the entire set of 1000 codes to see if more than one correct codes5. Make sure to tap "OK" to store code in remote.*There could be a better code than the first one that BEEPs or turns off. A different code might have more functions that work!**Make sure you write down the code(s) inside the remote or on the AC unit. When you replace the batteries you will need to reprogram the remote.Hope this helpsI updated my review (08\30\2024)

Worked great on my LG Mini split. Only negative is that I had to look up the correct code online to get the remote to work.

Did not work well with this a/c

There was no brand code for my split but when i used the search option it quickly found the unit and connected to my cassette mini split. easy quick replacement remote.

I am pleased with this product. The instructions were easy to understand. My AC brand was not listed, so I used Option C, within 5 secs the unit was on, and all the buttons worked. I am pleased. I recommend this universal remote.