Autel MaxiTPMS TS508WF Relearn Tool (Original 2025 New) Upgraded of TS508, TS601, Program MX-Sensors(315/433 MHz), Activate/Relearn All Sensors, TPMS Reset, Read/Clear TPMS DTCs, Free Update

I needed help and this machine solved my big problem! All of my original sensors batteries were we’re going bad and I needed a way to replace them. This tool is the perfect solution. This modern and up to date machine worked like a charm!!!It took me ONLY about 10-15 minutes of reading the instructions to get it all figured out, and these instructions are actually Awesome & easy to read!!!This amazing device was able to tell me the connection and battery, tire pressure and some other very awesome details. This thing, for the price, is by far the best tool in my toolbox. Comes with everything pictured...VERY COOL!!!It's easy and extremely simple to use. Had absolutely no problems programming it. This tool will easily pay for itself extremely quick and even better will allow you to always have access to your vehicle tire pressures which is sometimes very hard!!! Overall...Very handy tool! Easy to work, quick to respond, and very functional. It even arrived fully charged so literally after arriving on my porch, This tpms tool did everything I needed it to do. It’s durable & has good build quality. This is a great product that allows you to retrieve the sensor id along with tire pressure and reprogram the info into your car. AWESOME!!!This tool will also let you know when the battery is low in a TPMS sensor. DEFINITELY RECOMMENDED!!!

Have a 2014 GMC Acadia and while getting my State inspection, I had them Rotate the tires. Service station did not have tool required to Reset tire(TPMS), positions. So after performing my usual look around research, I pulled trigger on this TS508(maxi). Home run! Relearn was fairly easy. Unit is well made and case and all parts included are of pro. Caliber. In future, once I need to replace tires with new, I will then purchase the MX tpms sensors. I will have tire inst. Pro put these in, instead of using existing,as Battery in sensors could go bad any day after 5 years. Wife has a 2018 Nissan Murano and it was able to talk to Murano sensors so I could read all info on sensors. Here's a sweet bonus. So you need to add air to one or more tires. You have that pencil guage or round analog guage. You put the air in, you then check air but went below level as you tested. "Wash,rinse,repeat!" With this TS508, I overfill tire( about 5lbs or so), then get a read on pressure info, then just need to let out air, get another reading(it's quick), and keep doing until you have pressure right where you want it, To the 1/10 of a pound! I don't have to ever add more air. Had to re read press. on 508 approx. 2-4×. Went back to ea. of 4 tires to see if pressure held and all readings held up. Such a better way to check your pressures as DIC in vehicle will only show your level at lb. to lb.,not ,to the 1/10 lb. Also, i checked into cost of a Pro's charges to install their 4 new Tpms sensors as well as the needed programing for same. 0ver $400. For GMC Acadia. Over $800. For Nissan Murano!! Ouch! I suppose you could buy the $20 tool that just activates a sensor for the purpose of only Relearning, however, I feel it's so worthwhile to be able to perform any TPMS service you wish. Relearn,Program new, check info anytime.Reads out Tire; pressure, temp,sens ID, & Batt."OK". Wish it actually read Battery,LEVEL. Maybe in a future update or, maybe Autel Mx Sensors already do that. Happy motoring!

Started to have issues on my Camry after 10 years with the sensors. Looked all over internet and Autel seemed to be the best user friendly unit. Got my unit set up WiFi and then updated. With this u it you can either scan your tires (it tells you the order and has a visual also) one by one until you do all four and then program each sensor before installing or you can scan all four sensors and then download to the car they the obd port. Both ways are easy. There are videos on YouTube also with this unit to help you. I chose to read all four then program each one before installing. Worked perfectly. Just a note if your sensors that you remove are near by the car may read them and give a false low tire. Been driving the car for a week no issues so far

I’m a A level technician/Diagnostician. This tool is the best tpms tool I’ve ever used, now own. Don’t buy the more expensive autel tpms tools, this does everything you need. The shop I work for currently has a snap on tpms tool that has sat unused for about 9 months.(I couldn’t stand it, and bought this for myself through experience from my last shop). The mx sensors are also more inexpensive, it covers every make/model with free updates, and scans in at least half the time as a $1500 snap on tpms tool. I’m a huge snap on fan, have 30k plus in their products, but This autel takes the cake anyday.

First time I've had to program tpms. I needed to replace a sensor on a my 2011 Ford E250. Purchased an Autel MX sensor but after a failed attempt to relearn I purchased a cheap relearn tool thru Amazon but it didn't work. Didn't know that they had to be programmed. At first I couldn't get the ts508 to program the sensor. I went to the Autel forums and found out that the sensors have to be programmed at less than 10psi. I let the air out and it worked perfect. Very intuitive tool with different program and scan functions. A must have for the do it yourself home mechanic and pro alike

Not user friendly

Not terribly powerful but expensive. The instructions are tiny and written without stating clearly what each function is for or what it does in relation to common things a user is trying to achieve. Simple once I figured it out, but the interface is very clunky.

Works as designed and can read sensor ID number/program multiple makes and models!