Mounting Dream Soundbar Mount Holds up to 15 LBS, Sound Bar TV Brackets with Adjustable Extension Arm, Soundbar Bracket Fits TV with VESA MAX 600x400mm, Detachable Sound Bar Mount

Salieron buenas un las tengo de años

The media could not be loaded. Exactly what I needed, MOUNTING DREAM Sound Bar Mount HM5420. I recently purchased this sound bar bracket set along with the FITUEYES TV stand FT-S2601MB from AMAZON it’s an Amazon suggested accessory for those who are needing to mount their purchased sound bar to their TV. It did just that. Along with my new SONY X75H 4K 55”inch TV, I purchased the 2021 version SONY HT-SD35 sound bar. This was the 2nd sound bar system I’d owned in the last 14yrs. This one having the Bluetooth option that allows you to pair your phone device. The instructions for the sound bar bracket were simple and easy. I followed the provided instruction and installed the sound bar brackets along with the TV stand TV mounting brackets using the supplied Mounting Dream spacers I used the included parts/hardware that support the brackets installation to a sound bar with key hole mounting points. Attached the brackets with spacers underneath the TV stands TV mounting brackets then hung my TV to the stand and adjusted the sound bar brackets loosening then tightening the included adjustment knobs until the sound bar was hung to my exact preference and WOW what an improvement over the TV’s standard built in speakers . I’ve included some pics and video that display the end result and how great the sound bar sounds installed. Thank you , Mounting Dream for making a great easy to use sound bar mounting bracket.Nigel

Worked well

I installed it a while ago and it was very useful for assembling the sound bar to the LED TV.

I wanted to write a review based on my application.This mount will work with a standard low profile tilt mount. All the pictures I could see show this working with a full motion mount or at least a mount that allows you to pull off the wall a bit.When using this product with a low profile tilt mount it gets quite a bit harder to adjust it to your perfect desired position as there is not much room to get behind and adjust.As you can see in the photos it is good enough but there is still a slight gap between the bar and the tv.All and all this is a solid solution and at a reasonable price.Hope this helps.

Like many people, I have mounted most of my TVs - articulating arms and static mounts.Recently I started buying sound bars for my outdoor TVs and my vacation rental properties.I purchased one of these brackets as a test. It worked perfectly, allowing the sound bar to pivot with the TV, instead of being mounted to the wall.It also allows my outdoor TV covers to also cover the sound bars.I did spray each of the bars with rustoleum paint before installing to ensure protection from water.I also like that you can determine the profile from the TV to the sound bar (some of my TV’s I remove the sound bars and bring them inside)Very quick and easy to install - especially in a new mounting. Existing mounted TVs require you to take the TV down, remove the bracket and reinstall.They do include slightly longer screws to accommodate the thickness of the sound bar brackets.

This was one of the worst experiences I have ever had with the installation of a product. The directions are just terrible, so you're pretty much left to figure it out on your own. I finally got my soundbar attached to the TV, but I had to dig through my junk boxes to find parts. The spacers that come with the mount are either too short or too long. Same with many of the screws. It eventually worked out, but it was much more difficult than it needed to be, primarily because of the horrendous instructions and lack of sufficient parts.Edited to add: One advantage of this mount is that the hardware does include two flat-sided screws that fit the Polk Audio Signa S2 soundbar which has keyhole slots on the back. Those two screws would be almost impossible to find anywhere else.

Easy to install, had my tv mounted on the my wall just had to bring it down and Install. this mounting kit is design for various wall Mounts. made of Black powder coated metal.A second person is needed to help bring down tv if you’re not comfortable doing it yourself. But the mounting kit came with all the hardware needed, simple to use instructions.when mounted my sound bar it did wiggles slightly but nothing too noticeable and I don’t ever move my tv so not a big issue for me. also the Sonos arc is a heavy sound-bar (24.6 lb).In the picture it had this gap were the brackets are showing, if that is a concern you you can add black cloth to a cardboard or poster board to fill in the gap like I did in the second picture.Worth the purchase considering the wait price!