Garcima 13 1/2-inch Pata Negra Restaurant Grade Paella Pan, 34cm

Fits inside a Standard Weber BBQ - take out one grill completely and drop the 2nd grill down onto the burn plates directly - work at low heat on all three burners turning the pan (clockwise 1/4…) occasionally to be sure of no hot spots - cover with foil for the last 1/2 of the cook. The FragileRooster always recommend, If you’re doing fish or shellfish - add appropriately later in cook in order not to over cook - Great Pan - Heavy Duty - Absolutely Flat interior surface - Just what you would hope for... and because of the type of fast heating steel that it is - you need to always clean it thoroughly, then dry on the heat and then lightly re-season the entire unit inside and out with a bit of olive oil... as I stack other pans - I also add a layer of Saranwrap on the inside to protect its surface and keep it oiled - especially between far between uses .

The weight, materials and construction says it all as it provides excellent cooking control and pro results. I boiled, washed and seasoned the pan and then made the very best paella Valenciana I’ve made (n=~140). The soccorat was uniform. No burn spots, no mushy portions. Consistent results from edge to edge. I’ve since thrown away my thin pans and plant to purchase the next size up for larger parties. This is a pro level pan. Don’t waste your time with the thin gauge stuff.

The quality is amazing but I regret buying this size. Unless you eat small portions, this will be for 2 or 3 persons max. Used it twice and I'm already looking at 16in. We cook for 2 so it's fine for our needs but we can't share our amazing paellas with guests. Extra info: On the large burner, the whole surface was bubbling, a good thing. Easy to clean - fill the pan with water after use and let it soak for a few hours. Follow seasoning and maintenance tips to keep it from rusting. This is not stainless steel, nice shiny finish went away after only a few use, this is expected with steel pans.

I've had a 42 cm red-handle Garcima paella pan for over 30 years. It's almost always too big for the number of people I'm cooking for. It's the traditional Valencia shape and metal thickness: that is, it rocks on a flat surface, and you have to be very attentive to heat control because the metal is thin. It's a great pan; in fact, they're all great pans, but you should understand how they're different. The Pata Negra pans with the black handles are made of metal that's twice as thick as the traditional red handle pans. That means that the pan is more rugged, that it changes temperature slightly more slowly, and that it's somewhat less liable to get hot spots. Look at the product brochure I've scanned for you, and notice that most of the sizes are printed in black, but that four of them are printed in red. The red sizes don't rock when they're on a flat surface; they're made to be usable directly on an induction stove or a glass-topped range. The sizes in black have the traditional Valencia shape, where the middle of the pan is slightly depressed, the pan rocks, and you can't use it on an induction cooker without an adapter plate to turn it into a radiant cooking heat source. If they won't work on induction stoves, which are becoming increasingly popular, why keep making the Valencia shape? Because there are cooking techniques you can do with that shape that aren't possible if the pan is dead flat. The belly allows fats and juices to pool in the center of the pan. That means that you can use that part of the pan to color your proteins by frying them in oil, then push them up to the higher parts of the pan until it's time to start adding your rice and liquids. When the pan is completely flat, there is no particular place where the oils collect, so the way to use them is to brown your proteins a little at a time, grab the browned ingredients with a pair of tongs and put them aside on a tray to hold, and only after everything is nicely browned, then put everything back into the paella pan with the rice and the liquid. It's a different technique demanded by the fact that the pan has a different shape. Is this better or worse? Don't ask silly questions; just know what the attributes of the tool are. If you're always cooking on an induction stove, you'd be nuts not to get one of the flat bottomed pans. If you're cooking over a flame — gas, wood, or charcoal — both shapes will work for you, but you'll need to use different techniques on the completely flat shape than the traditional descriptions of techniques you may have read about when the demonstrator is using a pan in the Valencia shape . The important thing is to know that there is a difference, and to use a technique that will produce the result that you're looking for. By the way, there's a lot of whining in the reviews about the metal discoloring or rusting. If your pan doesn't end up black, it's because you don't use it. As for rust, after you've cleaned up, melt a little dot of lard on the clean, warm pan that you've just dried over your heat source, and use some kitchen paper to rub a thin film of lard all over the metal. My 30-year-old pan is black and mottled, and has never had a bit of rust.

Purchased the smaller pan because it was convenient to have for smaller meals. Expected it to be the same type of construction, but this one does not have the dimple/groves bottom like the large 55 inch pan. The issue with this one is food sticks to the bottom and cleaning is very difficult.

Great pan. I seasoned as best I could. Paella turned out well. Preferred over my heavier steel skillet for this dish. Recommended.

This pan seemed nice at first. The second time I used it, the pan itself turned red where it sat on the burner. I had to soak off the food. When I started to scrub it, I saw that the whole pan had rusted. Very disappointed.

Great little paella pan with a flat bottom can be used on ceramic, induction or standard type electric stove top, as well as gas & other. I have found it very difficult to find flat bottom pans as they all seem to have a convex bottom and do not sit flat. If this is washed and dried right after use with a thin coat of vegetable oil they will not rust.

Made several Paella's with Cuisinart's large red Paella Pan, getting crunchy caramelized Socarrat bottom at end always a problem as thin material and "teflon" coating, finally overdid it and burnet on bottom and no way to remove because of coating. So raised bar and bought this and larger 16" cheaper no lid pans for better heat distribution more robust scriptable surface. Used both once each, for increased effect, tried cooking both on outdoor gas Outland brand large firepit using natural gas (see pic of 16" pan), boiled too fiercely, need to raise, so finished on stovetop. 13.5" fed four hungry adults, could have fed 6. 16" is 40% bigger area and after starter fed 12 adults with side vegetable dish. As others said great heat distribution, but against included directions my wife washed smaller pan and set in rack to dry, and got thin patina of rust within 3 min. I re-washed and red and oiled immediatly as per instructions, perfect.

My first paella pan and I love it! Ideal for home-cooked paella, but remember to oil the pan before storing it away due to its carbon steel material.

Love this pan, perfect size for 6 people or 4 big eaters. Follow the care instructions after use and is in great shape.

I needed this for our son’s upcoming dinner before the wedding. They are of a very high quality and will make absolutely fabulous paella cooked on BBQS in our backyard! I like their weight and the fact that it’s anti adhesive

First picture - it’s condition after using two times. Just read a manual how to clean it. Always dry well and apply oil after using to store it properly. Really great pan that will last a lifetime.