Danco Complete Faucet Rebuild Trim Kit for Delta/Delex Faucets, Acrylic, 1 Kit (39675)

This is a great product. Saved me big bucks. I searched on YouTube about a bathroom sink that’s leaking and this kit has “everything” spring the washer all the parts and work great. However it did take me a few to get installed myself.. No more leaks in the faucet . 🙌

The looked exactly like the old faucet handles on my kitchen sink, so when one of the existing ones split in two in my hand (weird!), I took a chance. Didn't need the hardware that came with these, I just removed the existing screw and fitted these on where the old ones had been. The size is a very tiny bit smaller than the ones before, but they fit snug and work great. An easy fix.

Bought this kit to repair our leaking Delta Delex kitchen faucet. Upon installation, the faucet stopped leaking, but... a new leak occurred from the cold-side handle. I swapped the stems and the leak followed to the hot-side handle. Rather than going through the hassle of a refund, I contacted the seller, Jenco Wholesale Inc. They promptly sent me a new set of stems and washers, at no charge. Installation of the new stem was a success. Finally, no more leaks! Overall the kit is ok. I mean, it did the job, eventually. The handles look like the originals, but as other reviewers pointed out, the flow is a bit weird. Maximum flow is at about 3/4 turn of the handle, then declines toward full open. Installation was pretty straightforward. Just search Youtube for instructions, like I did before purchasing. If you get a bad part, it happens. Just contact the seller, they will likely make it right. Product: 3 stars Seller: 5 stars Review: 4 Stars

Even after reading some of the negative reviews I thought it had to be worth try for the price. Got this little repair kit had everything I need to basically completely renew my bathroom faucet for next to nothing. I honestly do not think it could be any easier and more straight forward. This kit does exactly what it says it does simple as that.

This faucet kit rescued our leaky bathroom situation without calling in a plumber. Clear instructions and all the pieces we needed. Feels solid once installed, though the handles could be a little heavier duty. Overall, a budget-friendly fix.

I bought these in January of this year to have on hand as I have 3 faucets that use these cartridges. This morning I had to replace a leaker and proceeded with the installation: Pros: Cartridge fit well and operates smoothly. I especially like the stainless steel stem and matching machine screw to attach the knobs. Cons: 1: I was not pleased with the knobs, they are very loose on the stems. With the hold down screw not installed, there is about 20 degrees of free rotation on the stems. 2: The knobs turn more than a half turn which goes past fully open and begins to restrict flow. 3: The knob caps have to be clocked so that its flutes match the flutes on the knob. This requires rotating the H or C label in the cap to be rotated as well to be aligned. Bottom line, cartridges good, knobs bad. I reverted to using the original knobs which resolved all them Cons listed.

I am a tenant and just not that great at home repairs but also responsible for minor maintenance. I was trying to remove my faucet handles to clean the hard water crusties and cracked one. I was having a hard time finding the same kind for the older faucet and these looked the same. Sure enough they fit perfectly. I did tighten them one turn too tight and had to loosen them. No complaints with the product and easy install.

I initially was going to replace my knobs on my faucet, but the process is not as easy as they claim. Sure, if you do just the faucets, a child could replace these -You just simply unscrew the knobs at the top, take them off, and screw the new ones on. However, if you want to also do the underside compartment, it's going to be a bit trickier. You need a wrench, which they don't tell you on the product page, as you have to wrench out where the knobs rest so you can get under them and put these faucet valves on. I gave up during the process because my faucet was simply too old and calcified to really wrench those parts out, and honestly, once I thought about it, why not just buy a new faucet? This costs nearly $10, when you can get an entirely new faucet for just $20-$30. Installing a new faucet is also easier then actually trying to put in these knob compartments. I don't think this product is bad, it's just a bit not needed. If your whole faucet is looking old, you might as well just buy a new faucet; you're wasting your time with this. I will say that this would be more for someone who really just needs to replace the knobs and knobs only, like say if you accidentally broke one or something. These knobs themselves are nice. They're not as high quality as the original knobs the faucet came with, but they are a good substitute.

It's really hard to get the right faucet buttons [hot and cold] for older existing faucets. This faucet replacement set had the knobs and buttons too...worked really well. My husband just replaced the entire knobs and voila I had the new buttons in place. This was a reasonably priced solution to my problem of a missing and cracked button.

Me gustaron mucho y quedaron perfectas, llegaron rapido

perfect what we needed. works great.very happy with item, and great pruice.

These taps came with a set of valves. Everything was decent quality and was easy to install. The screws were decent quality. Allowed me to replace a broken knob without having to replace entire faucet at this time. This set got the job done.

Easy to install and works good. No leaking. Good deal. Tks