ARB505 Deflator Kit 10-60 PSI Tire Pressure Gauge Rapid Air Down Offroad Kit With Recovery Gear Pouch (PSI)

this is the only one to get. Forget all the digital ones, this just works. Signed- Boomer..

I do regular offroading and need to air down my tires to about 15-22 PSI depending on the situation. I learned of these tire deflators while at the sand dunes as I watched someone else "air down" in a fraction of the time it was taking me to do it with my tire pressure gauge while crouched down at each tire for a few minutes each. Though I read the instructions prior to even purchasing this, it was hard to fully understand the process until I received the device. It was quite simple to use once i had it in hand and saw how it works. It's ultra simple and easy to use, and I can air down all four of my 33" tires to 15 PSI in about 5 minutes. It's construction appears sturdy and though I've only used it a couple of times I highly recommend it to anyone who airs down their tires, even if on an infrequent basis. The device removes the valve core, making deflating massively quicker. Removing the valve core gave me pause, but the device retains it inside so there's no risk of loss of the valve core. I purchased a few spare valve cores that fit my tire valves for safe measure, in case one breaks or has problems...so far no issues, though.

Works very well. I debated what to use for tire deflation for some time, and I did a lot of research. I am god that I went this way. The Currie version is made by the same folks. I compared my ARB to a friend's Currie and everything matches, down to the crimp pattern on the hose. When I shopped this one was cheaper by a few bucks. In some reviews I have read that these are made in Australia. This is incorrect. ARB is an Australian company, but these are a "stencil" product (made by a third party and branded for the customer at the factory) and the sheet in the bag states it was assembled in the US using foreign parts, I am assuming from China or Taiwan (just a guess). The build quality is excellent and the gauge is accurate. Some people are stating in reviews that this is super slow. They are not reading the instructions completely and are making a mistake. (I did it, too, at first. Always PRACTICE with stuff like this at home so you do not look like a moron at the trail head!) The stem remover will unscrew the stem and not remove it fully unless you know exactly what that feels like. If it is slow then you have not removed the stem core completely. Period. That is the *only* issue with these. The design will not allow for other errors - this is it. You need to do this several times at home until you have the procedure down perfectly. Once you have this down it will work every time. Also, my rims have had tires replaced at different shops over the years, and the valve stems are not a matched set. One of them does not like this tool much and requires a bit of extra attention from me, so I would recommend that you not practice this on a single tire but on several, possibly on different vehicles, as stems do vary a little bit. (My ARB inflator has issues with the stem on this same tire. I need to have them all replaced when I get new tires.) Highly recommended!

I have 31" tires on my truck. It takes me less than 15 min to lower the pressure to 20 psi for all four tires. Perfect for airing down before driving on the beach.

I bought a cheaper knock-off version and now that it failed, I figure I might as well spend a little more on the ARB deflator. It’s really quick to air down my tires from 26 psi that I drive on the street to the 12 psi that I run on the trails. The gauge is easy to read and very easy to get the connector threaded onto the valve stem. My only reason for a 4 star review is because the snap ring that limits the movement of the valve, fell of. I found it and was able to get it back on easily but it was annoying that it wasn’t on all the way on the groove to keep it on.

Works great for airing down for off-road wheeling. Works great, great quality, great value, seems accurate. Zero complaints

Great when riding sxs or other uses

This is a nice unit to have for anyone doing any serious 4 wheeling on rocks, snow or sand. This has a built in valve core remover and gauge. Simply pull the valve core section away, screw onto your tires air valve and get a reading. Now push in the valve core remover to untwist the valve core from the stem. Your wheel will not deflate and you can stop it once you get to the desired pressure, twist the valve core back in and remove the tool. Come with a heavy duty pouch as well.

Great product

El producto es ideal para lo que está hecho: desinflar las llantas rápidamente para ayudar en situaciones de off-road. Lo uso cuando algún vehículo se atasca en la arena de la playa y necesita mayor tracción. Este aparato ayuda a desinflar las llantas de manera rápida y monitorear la presión de manera simultánea.

Every ARB component I have bought has always been of high quality. This is no different. Better than so many others due to accuracy and durability. Pouch is a nice touch to help you keep it in good condition. Necessary piece for the toolbox of any off-roader.

En la foto de venta aparece la escala en “ PSI “. Y en “ BAR”. Realmente cuando te lo envian viene solo con una escala en PSI. NO LLEVA ESCALA EN BARES. The sales photo shows the scale in "PSI". And in "BAR". Actually when they ship it to you it only comes with a scale in PSI. DOES NOT TAKE A SCALE IN BARS.

The product was changed as the paper instructions guide inside were the correct ones as well torne and dirty, the cover was dirty with a foot print on it and the pressure gauge was from the same brand but a different model