TOBWOLF 1 Pair Mini Bike Rear Pedals, 3.1x1.6 in / 8x4cm Aluminium Alloy Fold...

I bought a Lectric XP4 and wanted a place for my daughter to put her feet and needed some that fold out of the way so I can fold the bike. I wasn't sure if these were going to thread into the hole above the axle, but they came with a few different sizes and one of them fits perfectly. It's a bit tight at first because the threads are painted, but it fits.

I got the passenger package when I bought my Lectric XP 3.0. The pegs that came with the bike would hit the front rotor when folded so I started looking for folding pegs. The original ones attached to the 12mm axles, good luck searching for a folding version of that size. I was able to install these foldable pegs in the mounting hole holding the mudguard and it seems to be working great. Mechanism feels cheap and had to tighten the hinge quite a bit but I won't be unfolding them all the time. Good solution overall.

I appreciated the inclusion of the tools needed to install. Came with Two Allen hex wrench’s in two sizes. I did need an end wrench for the nut. No written instructions were included, tho. ( Just see the photos on the Amazon site.). I installed these using a bolt hole on the bike that was meant to fasten the fender support bracket rod end. These holes are for a small bolt. And one I needed was included, with nut & washers. Internally there is a small ball, that seems to be under pressure. And that ball locates itself into one of two holes of a thin side plate fit into the hinge area. It is meant to hold the foot peg in the chosen position. NOW THIS “FOOT REST” IS JUST THAT. I DON’T BELIEVE THAT THE SMALL BOLT CAN SUPPORT MUCH PRESSURE, OR WEIGHT. Definitely DO NOT STAND on it. Only option I found that would fit the rear of our RAD POWER “RAD MINI” E-BIKE. As the motor power wire fits thru the axle bolt. We’ll see how well it holds up.

Muy buenos, cómodos para el uso diario de un niño

Bought two of the Lectric XP 2.0 st models last Christmas and we love them. I've added a couple of bolt-ons on mine; the most recent is a pair of rear footpegs and a rear seat. It makes sense--the XP can carry an extraordinary amount of weight (330lbs, I think) and the luggage rack in back is rated for 75lbs, which is plenty for most little ones. On top of that, I early on swapped an 11-34 freewheel for the stock 14-28 one, so I have a lower first gear if needed. These footpegs are beefy and bolt on with the included allen screws. One of them was a bit rattle-ly when folded but adjusting the pivot allen screw fixed that. The seat is cheap but waterproof. I suppose I could screw it on to the rear rack, but as it is the mounting screws protrude about an inch from underneath and I simply place it on the permanently-mounted folding basket and secure it with my two bungee cords and it's good to go. And a child's behind is well back of the cords, so no discomfort from them. Total cost for the mod: about $35. I don't yet know if there will be a need for a baffle to keep little shoes from getting caught in the spokes. If necessary, easy to fabricate out of clear rigid plastic and a few zip ties. I rode analog bikes extensively for much of my younger life. Now I'm a bit older but I find these machines to be extraordinary and am still surprised at their low cost. And now I can take a young passenger along.

Love love love these little pegs.. So perfect for an E bike if you know how to put Them on..

If you order this piece of crap make sure the washers are NOT on the bolt. They may not be needed for you and you cannot get them off. I made the mistake of installing it and scratched it up and now cannot send back. Now the things will not fold up. Not enough room to do so with the washers on.

IT WORKS BUT GETS STOCK SOMETIMES.

Fit right on the holes on the frame from the existing rack...connected using provided hardware. Nice and easy and strong for the 4 and 6 yrs old.

Even using the longest screw, its not long enough to install both bicycle rack and peg in the same hole. I've mounted the pegs on the rack frame with my own big washer. The flip close/open mechanism feel rather weak with a small metal ball and thin plate.

I wa looking for somthing for my little boy to put his feet on whilst on the back of my electric bike I tryed many different ones from amazon as well as bike shops and nothing would fit correct due to either the motor or disc breaks or parts of the footrest being to thick to securely attach to my bike, I was about to give up and then found these, and they fitted. Realy strong, easy to put on solid and folds up out of the way if needed. My little one love them as much as I do and it makes it easyer not having his legs accidentally touching the wheel every now and again. I would recoment this product and would definitely buy again.

Ich benutze sie seit mehreren Jahren und bin mit der Qualität und dem Preis zufrieden

S'adapte très bien sur un véligo. Attention néanmoins à bien serrer les écrous car j'en ai déjà perdu 1.