Monitor Arm with Laptop Tray for 13 to 32 Inch Screen & 17 Inch Notebook, Monitor and Laptop Stand, Monitor Arm Desk Mount Fits VESA 75/100 Gaming

Since working from home, I've tried a couple of different ways to mount my monitor near my desk. Initially I used a gas-assisted desk mount, which had great reviews but I found it to be clunky and frustrating to use - too many options, joints and settings which I did not really need. Then I tried mounting my monitor to the wall, which was great and worked perfectly. That was until I decided to go for a height adjustable desk, which meant I could not use a monitor attached to something other than my desk, so I started looking for something else. I saw quite a few items listed that all claimed to be fantastic, but I was drawn to the HUANUO arm after noticing the laptop stand too. I wanted something that was simple, sturdy and looked the part and the reviews for this seemed to back that up. I was a little cautious given the price, but I took the plunge and I'm glad I did. Assembly was really simple - it took me longer to manage the sea of cables I have with my setup, but even with that this arm excelled. I have mine clamped to my desk using the C-bracket as I didn't think my desk would be strong enough to drill through, but if the desk was a proper solid wood desk I definitely would have done this. With a little trial and error I managed to set my stand so that my monitor is dead centre of my desk, with my laptop to the right - just how I like it. Once set, I tightened the relevant bolts to ensure that there was no sag (I have a 27 inch monitor) and everything has stayed just where I needed it ever since. The added laptop stand is very convenient - now I can adjust my desk to standing / sitting height without any fuss, plus I have more space on my desk too! The cable management is also fantastic with a number of adjustable clips that you can place where you need - much better than some of the ones that have the cable management "baked in" so you have to try and make it work. I highly recommend this monitor arm, especially if you have a height adjustable desk (mine is the Idåsen desk from IKEA if that helps anybody).

Ideal for my remote working set up needing two laptops and monitors. Easy to assemble and very sturdy. Highly recommended.

Exactly what I was looking for. Good quality. The reason I give it 4 stars is that the pole is thin for the load of a monitor and laptop or two monitors. It should be wider like other standard models on market.

Good height position for the laptop, meets DSE guidlines using my 15" laptop. Easy to move into a comfortable position. Can deecide which sode you want the laptop or monitir based on personal choise. Fits perfectly to my desk.

Very stable and helpful when you have to keep an eye on many tabs. The laptop tray can handle weight of gaming laptops which is surprising. It was also very easy to install and set up. Even after it was complete there was still a lot of space under the stand.

Good value for money

Originally for my home office, I purchased a gas ram assisted swing arm. While I cannot fault the arm or the suppliers assistance with an off-set mount. That particular mount after a bit of use, didn’t provide the range of movement I was hoping for. But that has now been reused by my daughter for her set up. The HUANUO Monitor Arm with Laptop Tray, offered a more simplistic range of movement, and along with the laptop tray allows for a better position and thus more comfortable set up when working in my office. While this came with several cable management clips, one could always do with a few more. The assembly and set up was very simple, and the means of mounting both the monitor and laptop tray was a lot simpler than my previous mount. In both cases, the VESA mount is attached to the monitor first, which is then secured to the arm, the same applied for the laptop tray. This made the mounting a simple case of slotting everything into place, then securing it with the provided locking nut. Overall I am very satisfied with my purchase.

Good quality product

Got what expected!!!

I had no big expectations seing that this product was cheaper than other similars laptop stands that are sold on the market, and at that price the other product can hold only one laptop or one screen, this one can hold 2 screens or one laptop and one screen !! I choose this one because I could get it in less than 2 months (regardless of others I saw) and I needed it only for the laptop stand, not for a screen. I'm glad I have an extra spare arm that could be useful eventually. It feels strong, not flimsy at all ! My work laptop is pretty heavy but this stand does the job perfectly ! It's easy to assemble. Really recommend this product !

Took me a while to set up but all in all its good

Ich bin absolut begeistert. Es gab zwar ein paar kleine Schreckmomente, aber letztlich hat alles tadellos funktioniert Aber von vorn: Beim Aufheben des Paketes, habe ich den ersten Schreck bekommen, verdammt schwer, das Ganze. Aber da war die Hoffnung, dass es ja stabil sein soll und somit vielleicht auch ein bisschen was wiegt. Der nächste Schreckmoment kam dann nach dem öffnen des paketes. Teile ohne Ende. 🙈 Ich baue häufiger mal Ikea Möbel zusammen, aber hier war ich doch zuerst ein wenig irritiert. Der dritte und letzte Schreckmoment kam dann beim Öffnen der Bedienungsanleitung. Gleich unter Punkt 1 kam etwas, was ich gerne vor der Bestellung gewusst hätte. Vielleicht hatte ich das in den Beschreibungen ja einfach übersehen. Was das war, könnt ihr in den Fotos sehen. Aber danach hat es geflutscht. Meine Irritation über die vielen Teile wurde aufgelöst, denn die Bedienungsanleitung fand ich wirklich vorbildlich. Stück für Stück wurde ich durch die Installation geleitet. Mehrsprachig. Deutsch. Einfach. 👍🏼 Die Teile waren sehr übersichtlich verpackt, sogar notwendige kleine Werkzeuge waren dabei. Somit war der Aufbau wirklich kein Problem und mein Tisch und dieser Ständer passen perfekt zusammen. Da könnte ich zusätzlich noch dran turnen und es würde nichts wackeln. Vielleicht könnten die Kabelhalter ein wenig stabiler sein und die Schrauben und Muttern für die Installation der Laptopplatte. (Es handelt sich um 4x M4*8 mm, da könnte man sich vorab vielleicht im Baumarkt was Vernünftiges besorgen. Toll wäre es auch, wenn die Laptopplatte rutschfest wäre, da sie keine Seitenhalterungen hat. Aber diese kleinen Minuspunkte sind so unwesentlich, dass ich dafür definitiv keinen Stern abziehe. So, jetzt ist alles installiert, und ich habe endlich den Arbeitsplatz meiner Träume. Alles dreh- und schwenkbar und wenn ich den Esstisch als Esstisch nutzen möchte, dann kann ich einfach alles zur Seite drehen. Einfach super, ich bin absolut begeistert!

Pros: Very sturdy, well made, easy to assemble and install with instructions (took me 20 mins or so), very easy to adjust horizontally (I did have to lightly loosen a few joints...but not by much). If using for a monitor, you can easily rotate from landscape to portrait position and tilt back and forward. Cons: Once you choose a height for the "arm"...you need to use an allen wrench (handily placed on the pole) to adjust it. The arms only articulate on a horizontal plane...meaning you can't adjust the monitor/laptop stand up and down except by changing the height on the pole with the allen wrench. The middle joint on the "arm" has limited range of movement, perhaps a bit less than 90 degrees, so you can't push the monitor all the back toward the pole if it is bent (I'd say I got it about 4" from the pole but only by placing the joint on the pole so it starts as if it's coming out toward the back.) I will add pictures to this review soon to demonstrate my comments above. Overall, a great solution for what I wanted. I had two monitors on my standing desk, and we just got laptops. For a while, I'm using the laptop separately from my dual monitor desktop (possibly forever). There was no room on my standing desk for the laptop, so this device gave me a stand for that as well as replaced the monitor stand that took up room on the standing desk. I was initially concerned about all of this weight on my thin 1/2" likely particle board desktop, but found that the metal framework for the moving part of the desk ran the full length of the desk at the back and front. The clamp is closed on that metal bracket, reinforcing the desktop material without the need to add anything. I was planning to add a 6" x 3" x1/2" pieces of wood to the top and bottom of the desktop when clamping it in place to reinforce and redistribute weight a bit initially, and would still recommend that for thin or glass desktops...but I got lucky and didn't have to. My expectations for more arm movement was likely based on a wall bracket I have for a tv at home that permits it to fold nearly flat to the wall. It is an offset arm at the middle joint. I didn't pay attention to that when looking for a laptop/monitor solution. That said, it does what I need it to do. If you need it to sit almost flat to the back of the desk in any position other than full arm extended out to the side, this won't do that. Also, if you have two monitors on this stand, they can not be on the same level. One will be higher than the other. Overall, for the price...a great and sturdy little set-up. No complaints on my part!