AZDelivery D1 Mini NodeMCU ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth IoT Development Board 5V compatible with Arduino including E-Book! (Pack of 5)

These are super good. Plug right into the same space as an 8266 D1 mini but with loads more gpio and a faster processor.

AZDelivery are my go-to for all ESP boards, never had an issue and worth the slight extra cost for the quality. Would recommend.

Good value for the 5-pack. Used a USB micro to USB C adapter. Prevents strain on the board, and connection is then reversible.

As a beginner, I bought three of these devices, and found them OK for getting started with ESP programming, using Arduino sketches, Tasmota and ESPHome. They were easy to use for basic routines, and there are lots of handy multi-functional GPIO ports. However, as I did more advanced designs, I began to suffer random problems, and realised that the chips were suffering brownouts, when processor tasks draw too much power from the supply. For many other devices, this can be fixed by using a high quality power supply and cables, but it seems that for these boards, the culprit is the 4B2X voltage regulator on the board itself; this can only provide 150mA, no matter what power supply you plug it into. There was some variation between the 3 dev boards I purchased (what worked on one didn't always work on another), but I found that this made the AZDelivery D1 Mini ESP32 boards totally unusable for any work with Bluetooth (BLE). As Bluetooth is one of the key selling points of the ESP32 compared to the cheaper ESP8266 chips, this is pretty disappointing. There are potential workarounds involving adding capacitors or replacing the regulator chip, but only if you are very good at soldering!

I am using the D1 Mini for ESPresense with Home Assistant and WLED projects. I bought 5 of this. Very easy to flash and set-up. Works well, Bluetooth and Wi-Fi signal are very good. Recommended.

I bought this to replace a esp8286 board i had driving some LED light stips using the WLED software. My upgrade require 5 data lines out which the 8286 does not support (well) so this the logical choice. I have had no issues with it and i am very happy with the compact D1 form factor. Will probably buy more for future projects.

I tend to buy a lot of stuff from AZDelivery and to be honest, haven't had a problem with anything from them, including this esp32. Great quality item as per normal.

I bought a pack of 3 of these because I like the form factor, however they are just bad, I wanted to use them with I2s DAC/AMP, specifically Max98357, couple with ESPHome, however they just can't handle the load, and get brownouts. totally useless. perhaps they would be fine for low load applications, but if you want to do anything intensive avoid.

He usado muchos esp32, comprados en diferentes tiendas y estos son los más fiables que he probado. En concreto hay dos que llevan funcionando durante meses 24/7 sin ningún fallo, ni ralentización y sin calentarse en exceso. Cuando necesite más, volveré a comprar los mismos. Totalmente recomendables.

AZDelivery è una sicurezza, un distributore di cui ci si può fidare. Quando disponibili su Amazon è bene scegliere i loro articoli; anche se costano un po' di più non rischi di imbatterti in "aggeggi" difettosi che per chissà quali motivi sfuggono ai controlli qualità ed entrano nel mercato facendo dannare e perdere ore agli hobbisti.

Genau wie ich es mir vorgestellt habe

Worked as expected; used as a Bluetooth>wifi relay

Goed materiaal en snel geleverd!