KONNWEI KW206 Car OBD2 HUD Digital Meter Gauge All in One Automotive Trip Computer Smart OBD Speedometer Water Temperature Fuel Pressure Tester for All 2003 and Newer Cars

I bought one of these for my two trucks 04 and 96 rangers worked in both of them. I've only had it for a few days so far so I don't know how durable it is, but it seems to work good. It has a lot of different settings, so you can adjust a lot of things. It didn't really want to work at first in the 96, but you can manually make it hook up. And it works fine now. I also had to adjust the voltage 2 2 get it to shut off when I turn the car off but besides that, it works great, everything is really accurate and worked well i'm impressed so far.

This thing is awesome! I'm impressed with it so far. It works perfectly with a Crown Vic Interceptor. Some of the reviews I've seen where it malfunctions seem like they were made by people who tried to use this device in a car with an incompatible computer system. If you have an OBD II system at least up until 2011 (my car is a 2011), it should work The device is very accurate in terms of the speedometer and tach. The moment I hooked it up, I started getting readings I didn't know my car measured, such as air intake temperature, just to name one If you want the most out of your vehicle, I highly recommend this product. Just a heads up, initial hook will take a few minutes for the device to scan and determine what kind of sytem you have. And, at least for me, to enable sleep mode, I have to keep the key in the ignition until after the countdown finishes. Then the device will reboot with the logo. After that I can take the key out and it will do another countdown until going into sleep mode. Other cars or trucks may cause it to operate differently in this regard. Oh, and not to mention as a bonus, this device and scan for and clear out engine fault codes. The device also has very good build quality, and there's a slight weight to it, still lighter than a samsung galaxy phone, for example. EDIT: I've used the device for over a week now and it still works fine. It's accurate and timely. There's no lag in any of the readouts. For the sleep mode, I discovered you can just shut the car off and take the key out. It may do the countdown and reboot a few times, but it will eventually just go into sleep mode without you having to do anything else. Also, I did order an extra phone holder as the double-sided tape on the devices stand is not strong enough to hold up on a window for too long. This is a minor inconvenience compared to the overall quality of the product

On my 2002 Silverado it hooked up and worked well for a little while right out of the box...the tach was accurate and responsive, temp was accurate as were trip and speedometer. But hit one bump and the instrument face developed a black box in center of screen and then the RPM values went all wonky...had to be reset every minute or so, something internal seems to have been poorly soldered or some such. It CAN be switched from metric to english temps and mph, others say it can't but mine could. As a functioning plug-and-play gauge it's not very useful to me BUT...when you dig into it's ability to read the data stream then it gets useful. It reads O2 sensor voltages, airflow volume and temps, tps and a few other things that are really nice to be able to monitor. My vehicle had no codes to read or reset but this ought to be able to do both so that's a potential plus. I'm sending mine back to see if I can get lucky with a better built unit because the design concept is excellent but I'm not holding my breath. Long and short...as a functional reliable gauge for daily driving I think it's junk but as a diagnostic tool I think it's not bad so buyer beware and good luck. Weeks later....this thing seems to work fine in my 2003 Grand Marquis. This car has no tach so I tried the obd2 gauge again on the Merc and damn but it works very well....zero issues. It has read and cleared 2 codes just today...both were legit codes and I know what caused them, it does not have the "black box of shit" overlaying the tach like it did in the Silverado. The tach has no latency issues, it reads mph within 1mph of the dash gauge, temp seems reasonably accurate so I have to say ...... this gauge seems to work well on some vehicles, less well on others. In my Mercury, it's a keeper. a week later....it still works....go figure. I guess it likes some vehicles more than others. 18 months later...it's still a little twitchy but it's still doing it's job in my daily driver...2003 Grand Marquis. It still reboots at random times and sends a warning beep for no apparent reason but it also does a good job of monitoring RPM, speed, temp, timing and voltage...I'm used to the hiccups and I've come to rely on it a lot...so for my application I'd give it a 4.5

Not great. Got it to keep an eye on temps ,live data and the like. It did OK for a few days ,then I started to get a stutter. I figured my spark plugs are due, tried to pull up a pending code and nope nothing. Installed my other obd2, boom a code pending. If this thing can't even do a simple obd2 check, it's not worth keeping. I truly had to go through 3 pages just to pull up odb2 data. Pretty horrendous if you ask me. It's a horrible paper weight that might tell you correct temps ,idle RPMs and your speed. Returned as it wasnt worth the headache anymore. Went with a scangauge as ,you get what you pay for.

Man, this is my all time favorite purchase off Amazon. I was chasing an issue with my temp Guage on my 96 Jeep XJ. They are known to run hot. I had bought an IR thermometer to keep a check until I could figure out my issue. A friend suggested an OBD scanner. I did a little research and decided for the price I'd give this a shot. It's A LOT cheaper than what I'd already spent trying to fix my gauge. This thing is as simple to use as it gets. Plug it in, set what you want, and it does its thing. It's small enough to not take up room, yet the display is easy to see at a glance. You can even set alarm points in case the temp does start to get too high. Now the only thing I need my dash for is the fuel gauge. AND....I can scan my Jeep for codes, and clear them when the issue is fixed.

I love this thing. I was able to set it up easy and mount it to my car. Wasn't sure if it would stick to the rough surface of my dashboard but it seems to be hanging on fine. I bought it mainly to keep tabs on my speed as I didn't want to distract myself looking down at the Odometer/Speedometer. I can now take quick glances at my dashboard and its super easy on the eyes, numbers are very large which is a win for me,in a big way, honestly as I don't have perfect vision and it stays bright and visible even on sunny days which is great because glare can really ruin visibility on most LED screens. Everyone who has seen this tells me how much they like it and want to get one. I'd say go for it, you won't be disappointed in its features. I also like how it does a countdown and shuts off once the engine is cut, that way you know your battery isn't getting depleted with it being plugged in.

The listings says this gauge will display "up to 95 parameters" depending on the vehicle it's used on, so I assumed it could read any PID the ECM offers. A scanner can read both boost and EGT on my 2016 diesel pickup, but this gauge won't give an option for either of those. It only shows about 20 different parameters on my truck and some of them are useless to me, like liters/hr and gallons of fuel used since startup. The gauge can display MAP pressure (which is boost plus atmospheric pressure), but when I select the readout to be in psi instead of kpa, it only changes the label to psi and doesn't actually convert the numbers. Good thing Amazon takes free returns!

It functions for what I need it for. I haven't tried to update the firmware. Others mentioned that it is difficult to do that. It comes right on when I start my truck. You need to fully start your vehicle, otherwise it spends a long time in scan mode and then shuts off. I mainly bought it because I am visiting Canada this summer and I needed an easy way to read my speed in km. The metric speedometer in my truck isn't even visible in daylight and I don't have digital read out for speed. It does have a slight delay in catching up to the correct speed but it seems to line up with my speed in miles when it settles. When on cruise control it fluctuates between 1-2 mph plus or minus. Overall I would recommend it.

ممتاز واشتغل على سيارتي ماركيز ٩٧

Very nice and useful for removal of car error codes

Not sure but just run as my company manufacturer forgot a RPM option .

Bastante útil, complemento do computador de bordo.

I receive my order although its late but my waiting is worth