Seville Classics UltraDurable Commercial-Grade 5-Tier NSF-Certified Steel Wire Shelving with Wheels, 24" W x 18" D x 72" H, UltraZinc

This was perfect width and depth for the built in closet area in my kitchen, although too tall as there is an existing top shelf in the closet I did not want to remove. I have a friend who used a metal saw to cut 12" off the vertical poles, popped the plastic caps out of the top of the poles and put them back in where they were cut - apparently this is all simple and easy to do - especially if you have someone competent to do it for you, lol. I did assemble the unit and can confirm that part was super easy and the unit is very sturdy. Shelves slide over plastic clips, which act more as wedges than clips to hold shelves in place - hard to describe, but it is an extremely simple and intelligent design that works well under heavy loads.. Anyway, this shelving unit fits perfectly in my kitchen closet area, and I was easily able to transfer everything from the free-staning cabinet I was previously usng as a pantry to this unit without issues and now I can easily access everything in my pantry and see everything I have by just pulling this shelving unit out of the closet and can shove it back in when I'm done. I wish there was a rail or 1' wall at the base of each shelf to keep items from sliding off, but not a huge problem if I remember to move the unit gently - to be on the safe side, I used bungie cords to make a rail and they are working fine and I think string would work just as well. My unit is fully loaded and rolls in and out of the closet easily, but again to err on the side of caution I will not try moving it around more than the couple of feet from in and out of the closet while fully loaded..Additionally, I was careful to load all the heaviest items on the two bottom shelves and not to exceed the manufacturer's weight limit for this unit. Please note that the manufacturer's pamphlet included with the product states it can support a maximum of 500 lbs. on the casters, NOT 600 lbs. as stated in description here. Lastly, I can confirm the vertical poles are standard 1" width and will fit the inexpensive, standard screw-in casters widely available for that size pole.

Oh my! I am so pleased. I was a bit hesitant, scared I would receive wobbly, cheap shelving. This is so sturdy. Holds hundreds of pounds, even comes with rollers. I use mine for bolts of fabric (which are extremely heavy) and then stacks of fabric.I did have to shorten it a bit but there are so many pre markings it made it a simple job. Used the Dremel and heavy duty metal cutting blade. A hacksaw would work fine. I am 62 year old widow so if I can do it anyone can!But it is heavy. I put it together myself making sure I cut once to see how difficult it would be to cut -then did the final cutting. (I sure didn't want it too short!) I cut it to fit inside my closet on the very end which measured 25" wide. All four poles have to be same height so don't just start cutting. (If you need to cut at all.) The feet allow for some adjusting. Perfect for garages, closets, pantries that do not have shelving. The shelves are completely adjustable. Whether you need one 6" tall and another 18". There are several pre-cut markings to allow you to place your shelves wherever you want.My rack is TOTALLY full and no collapsing or wobbling thus far. I did not use all the shelving or the rollers. I have them in case I need them later. Shelves are high quality and extremely sturdy.

This is one solid, well-made rack system! It was well-packaged for shipping, and pieces were nicely protected. Instructions are simple and easy to follow. This rack can be made stationary, or it can be set up with wheels, 2 of which are locking. The frame is measured in increments of one inch to make placing the slip sleeves easy. Just put the 2 pieces around the legs where you want them, and slide them down just a bit until you hear a click. Shelves fit easily onto the sleeves wherever you want to place them. I got this rack to put in my small kitchen to house my various small appliances when I'm not using them so I don't need to clutter up my limited counter space. Not only is it functional, but it gives my kitchen a little kick of modern flair. I love this rack, and I do not hesitate in recommending it!  Seville Classics 5-Tier UltraZinc NSF Steel Wire Shelving /w Wheels, 18" D x 24" W x 72"H

This was one of my best purchases for our newly renovated kitchen. We had cluttered our counters with a multitude of small appliances. I had thought with the expanded kitchen we would not have that problem, but it seemed our "stuff" multiplied! Then I saw this little beauty. It was so professional looking and I knew I had just the spot for it! I found it not only looks professional, but it is. It is so heavy duty and holds so much! It was so easy to put together and it was up and being used in a couple of hours. I highly recommend this shelving. It won't let you down.

Impressed with the quality! It was fairly easy to assemble, however pay attention to instructions to start assembling by laying it on side instead of upright. The kit contains the option to add the wheels or not. We added wheels to move for easy cleaning underneath. The wheels look solid and strong to take the weight. We ordered the S Hooks in Stainless which is handy for snack bags and such with holes. Also ordered 2 shelf liners to keep small cans level. I really like the clean look! It took some thought and measuring to determine how to get the most storage for our small space. I like the deeper shelves and would only be happier if I have a larger home!

I love this!! But I do wish the manufacturers would make the lip on the shelf going up so it's more like a tray. Instead, the lip points down, which makes it sturdy, but doesn't prevent items from sliding off or getting knocked off. We tried turning the shelves upside down, but the assembly doesn't allow for that. I would also love for it to have one more shelf, but with the same overall height, so I could have at least one shelf that is shorter. I have my 12-inch skillets on this standing up in a pot holder and there's still around 6 inches above them on the shelf. You need a little space to lift them out of the pot holder, but a few inches from each shelf could go toward a sixth shelf.

It is easiest to build with 2 people, but can be done bY one

This shelf is the perfect solution to maximize my limited storage space. I like it so much I've ordered a second one.

Very sturdy shelf!!

Tel que décrit. Très résistante et logeable alors qu'elle prend peu de place

Excelente producto, el material es de muy buena calidad, de excelente tamaño, ajustable y de fácil ensamblaje, llegó a tiempo y en buenas condiciones.