HUANUO FlowLift™ Pro Monitor Arm for 13–32" Screens, MechaSpring Monitor Mount, Fully-Adjustable Monitor Stand with Tilt/Swivel/Rotation, Tool-Free VESA Mount, C-Clamp/Grommet Base, Max Load 15.4 lbs

First time ever assembling a monitor arm, and it could not have been simpler. The install was about 6 minutes in total from removing the packaging, identifying the screws and parts and finishing the job! Luckily they give you just about every single part or trpe of mount you could need for various applications which seems great and well thought out by the company. These arms make my desk look neater, make monitor adjustments simple & smooth, and the motion is so light it barely requires any effort. They are rock solid and sturdy, and seem like they will last a long time. I am using them on 2 Dell 24" Monitors, and it seems like its holding a cell phone with how easy it moves. Highly recommend anyone considering adding these to your setup, it will make you feel more organized, work more productively, and have ease of motion in minutes!

Decided to go with the monitor arm after the gas spring on my previous mount began to sag. The price, mechanical spring, and features overall drew me toward this mount. I'm running a Dell S3225QS (31.5" & ~13 lbs without the stand), so the single arm has no issues keeping it held up and stable with its 19.8 lbs max load capacity. I've had it for less than a week, so it's too premature to evaluate the longevity of this arm, but so far so good. Installation was straightforward and quick, all necessary hardware was included in the box, and the instructions were clear. The upper joint on my original order was defective and would swing freely regardless of how much I tightened it. However, after contacting Huanuo's customer support, they sent a replacement promptly, and everything now works as it should. I'm happy with my purchase, and will update this review should my views change with more time spent using this monitor arm.

Breeze to install, almost effortless. Works really well for my desk; it holds my 27 inch 9 lb monitor with no problem. No sagging and the tension adjustment is a nice touch, but I didn't need to adjust it. The VESA connector was extremely easy to snap the monitor into and I have since taken it off a few times to move things around and it is very convenient and easy to manage. The cord organizer could be better but its fine for just the power cord and connecting cable. I have two and use one with the clamp, and one with a predrilled hole and if I didn't know beforehand I wouldn't be able to tell which one was which, they are very sturdy and secure.

Super compact, super simple, super cheap. What more can you ask for. It's awesome to be able to adjust my monitor for racing and flight sims, and then put it right back away super easily. However I have to adjust the tilt roll of the monitor whenever I move it forward and back to make sure it's level (which may have a bit to do with my not perfectly sturdy setup). This can be a bit annoying as that roll adjustment is not as smooth as all the other adjustments and can take some fiddling to get level. The other hinges all feel very smooth and are very adjustable with hex key screws for resistance. I do wish the arm lifted a bit higher though! For the price, I am thrilled with the versatility!

Works well, easy to install, affordable, will buy more for sure for sure. Feels Sturdy so far on my 22"s. Adjustment is easy.

So i've had the pleasure to try this new flowlift pro side by side against the the non-pro flowlift, which is basically the previous generation that happens to be the most purchased monitor arm on amazon. In short, this arm is really good, and at ~$30 it is just a no brainer. Here are the changes vs the previous one that are worth being aware of, stuff that you can not derive from marketing talk or pictures: 1) new arm has slimmer design, more comfortable to grab onto when adjusting at zero expense to structural rigidity. Non-pro flowlift had this fairly large plastic housing on the top arm, making it seem bulky for no structural benefit. 2) new arm has better build quality of the arm itself (not counting the base). Less plastic all around, the plastic that is there feels less flimsy, and the plastic surrounding the up/down tilt mechanism is way less wobbly. For the last point specifically. non-pro flowlift was a complete disaster. This doesnt affect the actual structural rigidity of the mechanisms, more of a picky criticism. 3) new arm has a mechanical spring instead of gas spring. from the usability standpoint doesn't feel better or worse, huanuo claims it has better lifespan, i guess i'll take their word for it. All I can say is that at least adjustability smoothness in the new one feels perfectly fine and is not a downgrade despite not being a gas spring. 4) Biggest upgrade: up/down tilt mechanism, the one that is closest to the monitor. It seems like this new arm now has an actual spring inside the tilt mechanism, providing constant upwards force in order to negate effects of gravity and making up/down adjustment waaaaaay easier. The older one was a cheap crappy tension only mechanism. When you unscrew it, the monitor would instantly fall down, so you had to somehow hold it in place and screw at the same time. The new one makes this process way smoother. Perhaps if you have a basic light monitor this isn't a big deal, but I had a 32 inch monitor with a protruding vesa mount, creating a large moment arm force, as a result of which old arm was a huge pita to adjust the up/down tilt, while this new arm, while not perfect, is perfectly manageable. One small criticism I have for the new arm's up/down tilt mechanism is that it needs a bit too much force to tighten it for it to be fully fixed in place. 5) all metal across both the arm and the base is now matte, while previous one was glossy. I would consider this an upgrade since it doesn't collect fingerprints, and the scratches over years of usage will be less visible. 5) they redesigned the base of the monitor. Old one used to be a single solid black painted metal piece with 4 rubber feet, the new one is slightly larger in the surface area, which is a good thing, but it's also bare unpainted metal hidden under plastic housing. Feet on the new base are made out of continuous foam strip as opposed to 4 rubber feet on the old one. Old one felt slightly better quality. 6) New arm uses a single L wrench to tighten every hole, while old one had 2 separate wrenches with 2 different sets of holes, very annoying, big win for the flowlift pro. Also new one does not come with screw driver for the vesa screws, old did, not a big deal but keep in mind.

It works but the tilting is bad and can barely hold my monitor. Be careful when tightening the Allen screw because the arm is plastic and the threads will go bad causing the screw to just spin. It’s a cheap arm. Will be buying another brand and spending more. I advise you do the same.

Quick monitor desk specifications: Flat 27" side monitor (just under 12 lbs) 10" x 6" MOUNTUP reinforcement plate 55" x 28" HUANUO standing desk (the "cost effective" two board desk) This arm has a a lingering wobble when I make large mouse movements with the arm mount extended a bit less than half the distance it's capable of. The wobble/shake itself is very small and stabilizes itself in about a second, so as a side monitor this is within acceptable levels for the price I paid. Granted, my desk isn't the most sturdy/stable so do keep in mind that this probably plays a, probably significant, part in how much desk shake the mount arm has to resist and stabilize. In comparison, the HUANUO TitanLift monitor arm (3x the price of FlowLift) that is holding my main 32" monitor (just under 11 lbs) will generally not shake at all from the same large mouse movements. It will shake with the desk if a strong force is applied but it instantly stabilizes once the force is no longer present (I might need 480hz vision to catch a wobble if there is one). This isn't a great 1:1 comparison as it's nowhere near as extended and is even pushed backwards a bit more which is much more stable arm position. I think this is a great monitor arm mount for the price, but I would consider looking to get something more premium if your desk isn't the the most sturdy/stable and/or have plans to extend the monitor outward at more than a 75 degree angle.

The two joints between the lower bar and the angle bar broke, the monitor moves to the left side automatically because the screw is eating into the metal instead of clamping against it. Hence this product is basically useless even at 29.99. Disappointed.

I have to say I was very sceptical of this considering the price of the competition, at time it was 43.99 euros. 2+ years later I couldn't be happier, it's still effortlessly holding up a 35" Ultrawide that weighs just over 10 kilos (Benq EX3501R) and takes no effort to adjust. I did have to really tighten the vertical swivel, but after tightening it once to the appropriate force I haven't had to do it again.

Zeer tevreden van deze monitor arm, kabels verdwijnen in de arm, en de USB poort in de voet is een handige toevoeging.

ottimo supporto, facile da moEro un po' scettico visto il prezzo così basso rispetto ad altri bracci in circolazione, temendo il classico "effetto crolla-tutto" dopo due giorni. E invece mi sono dovuto ricredere alla grande: questo supporto HUANUO è una bomba assoluta. Il montaggio è stato davvero rapido e intuitivo, roba di dieci minuti scarsi tra morsetto alla scrivania e fissaggio del monitor. La struttura è solida, robusta e regge lo schermo (nel mio caso un 27 pollici) senza il minimo cedimento o oscillazione fastidiosa mentre si digita. La cosa spettacolare è lo spazio che recuperi liberando la base originale del monitor: adesso la scrivania è pulita, ordinata e posso regolare l'altezza e l'inclinazione dello schermo al millimetro a seconda di come mi metto seduto. Per quello che costa, la qualità costruttiva è incredibile. Se volete fare un upgrade alla postazione di lavoro o gaming senza svenarvi, questo è un acquisto super consigliato. Non tornerei mai più indietro!ntare e perfettamente funzionale. Buon rapporto qualità prezzo

Depois da excelente experiência que tive com a versão de braço duplo, decidi comprar este modelo de braço único para oferecer, o que por si só já diz muito sobre a confiança que fiquei no produto. Tal como a versão dupla, a qualidade de construção é excelente. Os materiais são robustos, a montagem é simples e todas as ferramentas necessárias vêm incluídas. Depois de instalado, o braço fica muito estável e os movimentos são suaves, permitindo ajustar facilmente a altura, inclinação, rotação e distância do monitor. A gestão de cabos integrada ajuda a manter a secretária organizada e o braço liberta bastante espaço útil, tornando o setup mais limpo e ergonómico. Depois de afinada a tensão do mecanismo, o monitor mantém-se sempre na posição desejada sem qualquer folga. É um produto que transmite qualidade em todos os detalhes e que melhora significativamente a utilização diária do computador. Não é a opção mais barata, mas na minha opinião justifica plenamente o investimento pela qualidade, durabilidade e facilidade de utilização. Recomendo sem qualquer dúvida. Fiquei tão satisfeito com a versão de braço duplo que voltei a escolher a HUANUO para este modelo de braço único.