Touchless Bathroom Faucet, Dalmo Automatic Sensor Touchless Bathroom Sink Faucet with Hole Cover Plate and Temperature Mixer, Chrome Hands Free Bathroom Tap for 1-Hole/3-Hole Sinks, Battery Powered

Your browser does not support HTML5 video.  I always wanted an automatic faucet for the guest bathroom because the kids leave it on or did not shut off completely. Home improvement stores selling most automatic and touchless bath faucets north of $260 to $360. Took a chance on this one. Turned out great. Had to change the valves due to their age, everything else was included in the box to get the job done. The instruction included in the box are updated and have a good installation diagram. It was clear how everything went together. The photos on the web site show how to install them as well. Installation took a while due to my inexperience. Make sure to locate the main unit in an area where you can change the batteries later. The finish on this faucet is beautiful and it adds a clean modern look to the sink. Great product, Good value.I write reviews as a hobby and try to provide the best assessment I can of any item I buy from Amazon. If you like my review, found it helpful, or just want to offer some encouragement feel free to like my write-up and follow my profile. Thank you. Be well.

Your browser does not support HTML5 video.  This is a pretty sleek faucet requiring no hands. You cannot adjust the temperature except from underneath the sink with the module above the black box. This would be good for a hand washing station where you don't need to change the water temperature. It also helps keeps germs at bay. You can install this on a single hole or triple hole sink. It even includes teh braided hoses to connect your hot and cold water.The only negative I have is that you need to supply AA batteries to run it. I'd prefer if this was a plug in and forget it type of faucet. I do not want to be bothered with crawling under the sink to replace batteries.

We have a small wall-hung bathroom sink in the warehouse which was always crowded with a soap bottle on one side, and a lotion bottle on the other. It seemed like 1/2 the time, I would turn on the faucet handles and knock one or the other of the bottles to the floor. The soap bottle would also got filthy from everyone pushing on the pump to dispense the liquid. I really wish I would have taken "before" pictures to show how much these inexpensive improvements cleaned up the sink!So after replacing the soap and lotion with touchless dispensers (thin liquids about 25% with H2O) https://www.amazon.com/gp/product/B086CCS1ST/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1, I decided to replace the faucet also. It had been dripping slightly if someone didn't shut it off tight enough, so it would have needed repair anyway.My main concern was that the sensor would go off every time the toilet was used since this bathroom is only 6' x 6' in size. This is not an issue at all. If you look at my pictures, you can see that the water doesn't come on until my hand is directly under the spout. The other issue I was concerned with is that some reviewers were complaining about the noise when the water shut off. This is also a non-issue as the noise is comparable to when the water was shut off with the old faucet. I think it really depends on your water line pressure. The last issue that concerned me pre-purchase was the length of time that the water would stay on. That was the best part as the water comes on when I put my hands under the faucet, and stays on until I remove them. Not at all like those Walmart bathrooms where you have to keep waving your hands under just to rinse the soap off!Pros:Inexpensive (comparably)Great sensor rangeWater temperature gets mixed wellEasy to install if you are handy at allAll parts were includedLooks good (not really important for a warehouse bathroom)Cons:The base plate for 3-hole install - It's kind of flimsy and I wish that it would have had "studs" underneath for the 2 side holes. This would allow the installer to tighten the base plate evenly and keep the faucet from turning at all. As is, I plan to put a fine bead of silicone around the base to "glue" it in place and also make sure of a water-tight seal.

This faucet is ok for what it is and does as advertised. The few things to note include:- the sensor below requires large objects (like a hand) to trigger it which becomes a tad more difficult when using.. say... a tooth brush.- the sink on time is pretty short lived and it doesn’t have a way to increase it. It would have been nice to have similar functionality to the Moen kitchen faucets where you could turn it on for long period use.- the only way to control the temperature is through the feed under the sink. I would have paid more for a more accessible adjuster- the valve turning off and on is loud, it will shake

Proseasy installMotion sensor works greatKid friendlyGood for Hygiene OCD momConsCould do with a better temp control system but for this price cannot expect the moon

This is a great way to renovate an old bathroom. Gives it a touch of luxury. The finish is excellent. The manual was very easy and clear to follow. Setting on the hotness of water can easily be set. Best of all it only needs a battery for the sensor. The metal quality is thick too. It feels well built. Overall, I love this purchase and will definitely get another one for my other bathroom.

This faucet work well. Goes on easily and goes off. We really like it in our office restroom.

I like it no complaints would highly recommend.