Performance Tool W2503 1/4-Inch Impact Driver & Extractor And Bits , black

I have a Henry H001 that I wanted to upgrade the front sight to a HiViz piece. Couldn't get a screw out. Was a real problem as I had chipped the original screw trying to remove. Bought this 1/4" impact driver for that specific purpose...it worked like a dream...dislodged the screw with 4-5 strikes with a hammer. The advantage of this impact driver is that it is small enough to work without adapters...very solid...needed to put some oil on the advance mechanism. Would recommend.

perfect for removing carb nozzels small engines

I don't need this thing often, as in once in the few months since I bought it. That one time, it paid for itself.I do electronics work and this, smaller, size is perfect for the stuck / frozen / rusted stuff I'll see on the bench.This particular model is a good price and works well. Could be more nicely finished, but that would be hard at this price.Good tool, good value.

Couldnt get it to work. Finally used a hammer and scew driver. Returned it.

I used this tool to remove 2 stuck screws on an old Singer 128 sewing machine. It was able to cleanly loosen the stuck screws with a firm hit with a hammer. One thing you need to make sure is too use the correct size impact screwdriver bit or you will damage the screw head slot. The kit only came with one small slotted bit, so I had to use one from another set of screwdriver bits.This impact driver can be used to remove both left and right hand threaded screws. You set the direction by depressing the bit holder shaft , and turning it left or right. Be sure to check the direction the bit holder shaft is turning after each hit on the driver. The impact of the hammer blow can accidentally reset the bit holder shaft to twist the other way. You can end up tightening the screw as a result.The tool looks to be quite sturdy and durable. The metal has held up to a number of hammer blows without any noticeable damage. This tool is made in Taiwan.

Paid for itself on day one. I was working an old metric motorcycle with a master cylinder cover that hadn't been removed in 15 years, so of course one cover screw was frozen TIGHT. Tried the Vessel Megadora 980 Impacta P2x150 #2 JIS Cross Point Impact Screwdriver and the Klein Tools 70220 Impact Driver, with a JIS bit, with no success. Gave up when together they mostly stripped the screw head. Was planning to drill it out, but found this beauty instead. This unit does not come with JIS bits, so I used it with RW 0059-004 JIS Screwdriver Impact Bits #2#3 Standard & Long 1/4 Inch. Bang bang, and loose.Cons: no JIS bits. (Be sure to get long-shank bits, if you buy a set.)

I had a very hard to get at retaining screw in the float bowl of a motorcycle carburetor. After a week of various methods, trying to ease it out, this impact screwdriver sprung it loose in one small tap. That saved a trip to the machine shop.

This little guy saved me a few times already. Working on an old motorcycle this this is a must. I have not had to hit screws more than 1-2 times. It's a little tricky to get it into reverse though.

Great product - being 1/4 inch socket - used in situations where a bigger impact driver would be dodgy -Only downside - slapped with large postage and export tax bill from Fedex - did not see that when ordering - not even sure if it was displayed.Would recommend except keep an eye out on postage fees. so 4 stars

Not a paid review. I had completely stripped a screw on my motorcycle master cylinder. No amount of lubricant or tapping a screwdriver with a hammer would loosen it. This impact driver loosened the screw on the first try. Make sure you set it to rotate left so the extracter bit can grip

It works as expected. But I use it sparingly. Don't recommend it for anything over a 1/4" thread though. Works on fine machine screws, but lay on the penetrant. The bits can take impact without chipping. However the bit can twist slightly if the fastener is particularly seized. Buy extra bits if this is used a lot. The good news is it fits the standard impact ready bits.The one big downer for me is that it does not come with a storage case to keep it in. So far done its job.

The impact driver arrived on time which was great but it jammed the first time I used it and I haven't heard back from the seller. The product quality appears to be low.

Worked well to remove a stripped out Phillips head screw from my brake master cylinder