Under Sink Water Filter System, NSF/ANSI 53&42&372 Certified, 8 Layer 0.5 Micron Water Filtration Reduce Chloramine, PFOA/PFOS, Lead, Chlorine, Bad Taste & Odor, Under Counter, SK99-NEW

I specifically picked this Frizzlife system over competitor brands because I didn't want to sacrifice my sink's water flow. Glad that didn't change. Setup & Installation: Installation was direct and straightforward right out of the box. I mounted the main unit directly to the inside wall of my under-sink cabinet using screws, which kept the whole assembly secure and elevated off the cabinet floor. Connecting the braided stainless steel lines to the existing plumbing took just a few minutes with basic hand tools. First Use & Performance Per the instructions, I let the system flush for about 10 minutes after setup to clear out any loose carbon fines. Right after that initial flush, the water quality was noticeably improved. It tastes remarkably crisp, clean, and completely neutral with zero chlorine odor or metallic aftertaste. Perfect for drinking, filling water bottles, and cooking. Build Quality & Value The 3-stage filtration housing feels sturdy, compact, and well-designed for a modern under-sink setup. Changing out the filter cartridges in the future looks like it will be a simple twist-and-lock process without needing to uninstall the whole bracket. Pros: - Quick, hassle-free installation (easy to screw-mount securely). - Immediate improvement in clarity, taste, and smell. - Compact design that leaves plenty of room for under-sink storage. Cons: - Requires a brief initial flush, but that's standard for carbon block filters. I haven't done a replacement yet, and hope that the process will be simple enough. Overall, this system delivers excellent water quality with minimal installation headache. Highly recommended for anyone wanting a high-flow, reliable under-sink filtration system!

Extremely easy install. Works great right out of the box. Removes all noticeable smells and tastes from our city water. Super super satisfied.

I don’t care what anyone says. This thing is amazing! It’s literally exactly what I wanted. I was able to get filtered water from my main faucet without drilling the countertop. The water tastes perfect, and is definitely better than a Brita. Super simple installation that I was able to do myself. The hot water doesn’t go through the filter. In my building, it takes about 30 seconds for it to get hot anyway. So if I want to save the filter, I can just use hot water for things like dishes. It’s exactly what I was hoping for! The water flow is still great too. Doesn’t seem to take much longer than before to fill a bottle. No leaks either (granted it’s been 1 day). Everything I needed for install was included, except I used my own wrench.

We were unaware we had ordered the wrong unit for our install, after reaching out to the vendor to address the confusion it turned out that we needed the SP99 and they quickly sent out the correct unit and addressed all of our questions. The unit went in quick and the quality of the water is top notch. We could not be happier with the level of service and the quality of the product and are looking forward to many years of issue free, crystal clear filtered water. A few suggestions for your install: Use the enclosed foam to help keep the filters from shaking when the unit is bumped especially if under your sink or in an area that people often access or store supplies. You see the filters do not sit flush against the surface when you mount the unit, I guess this is to ensure sufficient room to remove/replace filters. What happens is that when the filters are touched/bumped the unit will shake a bit putting stress on the 2 mounting holes. Now the mounting holes being plastic and not very robust can over time cause wear and potential failure/cracking, so what we did was cut the existing foam that wraps around the filters when shipped and used it to remove the slack/play within the housing (see pic). We also added a 1x3" strip of wood to the cabinet wall to help support the unit and provide more material for the screws to bite into for a more secure mount. Adding this strip of wood actually provided the room we needed to slip the foam into place without any need to trim, it was like it was made for the job. Also if you are like us and have a dedicated 3/8" shut off for your filtered water supply you will need to buy a 3/8 to 1/4" push to connect reducer to go from your shut off to the 1/4" hose that supplies the filter housing inlet manifold (see pic). If your shut off has a brass ferrule (part that slides over the piping) you will need to pick up a plastic one from the hardware store because the brass one will tear into the polypropylene tubing and cause leaking. Final Thoughts: Take the time to choose the best way to route and secure your hoses, use teflon tape for all threaded connections, open the filtered water tap when initially supplying water to the unit to evacuate trapped air, dont over tighten your connections if they are leaking, tighten slightly and observe, and allow to run for 5-10 minutes to flush out any loose material and viola Robert is your mother's brother (Bob's your Uncle). Also we found that if we sat the unit on top of the cover to establish where to mount that we had the perfect height to remove the filters while also being able to remove the cover should the need arise in the future. You are now ready to enjoy great tasting water and can rest easy with a high degree of confidence that there will be no leaks. Lastly a big thank you to Frizzlife for all of their help and patience.

I couldn’t be happier with this water filtration system! I’m a woman in my 60s with no plumbing experience, and I was able to install the entire three-stage system by myself in less than 30 minutes by following the company’s YouTube installation video. The video was clear, easy to follow, and made the whole process much less intimidating. The water tastes clean and fresh, and it’s reassuring to know I’m drinking filtered water every day. If you’re looking for a high-quality filtration system that’s simple to install, I highly recommend this one!

I purchased this type of water filtration system because our municipal water supply is "iffy" in my opinion as it smells too strongly of chlorine for me. I believe this system has improved my water quality making the water safer for myself and my pets. Now the strong chlorine smell is gone and since this system leaves in important minerals the taste of the water is excellent! It was easy to install taking less than 30 minutes including moving stored items out of the way. Everything needed to install was included and connected easily to existing parts and water pressure is excellent. The design is good in that it doesn't take up a huge amount of space and was able to put in a place where we can change the filters easily. Since the system has only been in use a short time, I can't honestly say how durable it may or may not be be seems to be made of high quality materials and I'm pleased with the product. Also, replacement filters are quite a good value and don't have to be changed as often as on might think! Overall, an excellent value!

Browsed through a lot of Under Sink filtration units before settling on Frizzlife. Reading through other product reviews some of them listed issues with cracking and that sent me looking for a pressure regulator (just in case) and the pressure regulator I found was made by Fizzlife so decided to see if they also made Under Sink Filters and not only did they but their pressure regulator was included. So far, Day1: No problems, installation was super simple and strait forward. The biggest problem I had was removing the soap dispenser in my sink to add the included faucet and that is hardly the faucet's fault. Once that was out I think the whole installation took maybe 15 minutes. The kit was comprehensive it even included the razor blade for cutting the tubing, the only thing I needed was a pair of channel locks. As currently I have opted to allow the filer to sit in the cabinet tho I may decide to mount it when it's time to change the first filter.

Works great for good drinking water and for coffee and tea. Especially for people who don’t like the bottle water option. I have well water that you can definitely tell when you fill up a bottle. Great results for the money.

très bien - facile à installer - un peu difficile pour changer les cartouches - faites attention ou vous l'intallez et placez le avec au moins 5 à 10 cms en dessous sinon un peu galère- pensez à commander d'autres cartouches car 6 mois passent vite

Purified water is no different from tap water.

Me gustó bastante el agua tiene un sabor muy agradable

Ich nutze das Frizzlife-Wasserfiltersystem nun seit mehr als einem Jahr und bin sehr zufrieden damit. Die Installation war unkompliziert und das System funktioniert seitdem zuverlässig. Das Wasser schmeckt angenehm und ich hatte bisher keinerlei Probleme mit dem Filter. Nach über einem Jahr Nutzung kann ich sagen, dass sich der Kauf für mich gelohnt hat. Ich würde das System jederzeit wieder kaufen.

Install was a breeze, and you can taste the difference right away. Highly recommend.