Liquid Rubber L R RV Roof Solar Reflective Sealant 1 Gallon white 14101

Great product! I used this product to reseal my rv roof. I have sheet metal on my rv roof. Unfortunately, the old sealant was beginning to deteriorate. I used this product to reseal the area between the vents, other openings and the sheet metal roof. I used a cheap paint brush to apply. I applied 3 coats, which took about 30 minutes per coat to apply. My roof has 6 vents, one seam across the width of the trailer, and 3 other small openings that needed resealing. This new sealant dried quickly and was dry in about 4 hours, allowing another coat to be applied. The product had very little smell when applying, and was pretty similar to painting with a thick paint. I was quoted $1,200 to reseal my roof. The total cost to me using this product was about $50 and 1.5 hours of my time since I used about half of the gallon. My only mild complaint was that the plastic lid was hard to remove initially. Since the manufacturer says the product is UV stable, hopefully it will last a long time.

Great I can buy good product here , for repair motor home leaking roof, US product as is shown on You tube how to repair caravan roof, using same product and in reachable price, highly recommended, and delivery very quick I mean very quick i less then 15 hrs from the moment I paid. Thanks

Had a small leak on a flat aluminum travel trailer roof which required removing the ceiling and insulation inside to find it. Could not find it from the roof but after removing the ceiling and insulation, where it leaked, could see five small pin holes from the sun shining in from them. After reading reviews for these type of products to be used as a water sealant, decided on this brand for price, ease of application and discovered it spreads so smoothly was able to do three applications for an area that the container said would do only one application. There is a huge benefit to multiple thin applications versus one and some draw backs but multiple has the advantage of being more durable. Which I inadvertently had to test since the drainage pattern from the condensation from the air conditioner had changed, needed to lower a dam so used a hammer to lower it. Fully expected the material to pull away from the surface after the pounding but it remained adhered to the roof surface, which could have something to do with the primer too but nice to know it can take a beating and not flack. But the real surprise, and still find unbelievable, is the aluminum temperature on the underside (have not put insulation or ceiling material back) measures, using my Etekcity Infrared Thermometer, as the same temperature as the thermometer in the shade, when the roof is in full sun This aluminum roof without the product and only an inside reading at the ceiling, BEFORE, with insulation in between it measured 10 degrees hotter. Also took a couple measurements before while the ceiling was open with just bare underside of the aluminum in full sun on a cool spring day showed the underside of the aluminum was 100 degrees, while outside temperatures were 65 degrees. The bare aluminum is gathering heat and conducting it Here is the part which is unbelievable, and could be a good thing or a bad thing, depending on winter or summer, measured the temperature of the roof in the evening after the sun has gone down, air temperature was 64 degrees, the roof temperature with this product, no sun light on it, showed all surface area measured 6 to 8 degrees COOLER than the surrounding air. It does not absorb the heat and radiates it back. I do not know all the science involved only know what I measured, and expecting a substantial savings in air conditioning cost This is the only product of this type have any knowledge but if they all work like this one everyone needs to put it on their roof, just know this one seems to be a miracle product, so highly recommend it.

Ease of use coverage is excellent... Sealing ability is brilliant...

I did a test patch on my RV rubber roof. It worked great. I used the Liquid Rubber cleaner followed by the primer and then 2 coats of RV roof sealant.