
โก Upgrade your RC precision with Team Losiโs sleek servo horn!
The Team Losi Racing 25T Aluminum Servo Horn (TLR1557) is a lightweight, precision-engineered component designed for electric RC cars and trucks. Measuring 4 x 2.1 x 0.28 inches, it offers universal M3 mounting compatibility and is crafted from durable aluminum to enhance steering responsiveness. Trusted by the RC community and backed by Horizon Hobby, this servo horn is a must-have upgrade for serious hobbyists seeking performance and reliability.
| ASIN | B004TPC5B4 |
| Automotive Fit Type | Universal Fit |
| Best Sellers Rank | #476,377 in Toys & Games ( See Top 100 in Toys & Games ) #243 in RC Servo Horns |
| Brand | TEAM LOSI RACING |
| Brand Name | TEAM LOSI RACING |
| Color | grey |
| Compatible with Vehicle Type | Passenger Car, Truck |
| Customer Reviews | 4.5 out of 5 stars 397 Reviews |
| Fit Type | Universal Fit |
| Global Trade Identification Number | 00605482039953 |
| Item Dimensions | 4 x 2.1 x 0.28 inches |
| Item Weight | 0.01 kg |
| Item dimensions L x W x H | 4 x 2.1 x 0.28 inches |
| Manufacturer | Horizon Hobby |
| Manufacturer Part Number | TLR1557 |
| Material | Plastic |
| Material Type | Plastic |
| Model Number | TLR1557 |
| Number of Items | 1 |
| OEM Equivalent Part Number | TLR1557 |
| Style Name | Modern |
| UPC | 696748147338 605482039953 |
| Unit Count | 1 Count |
| Voltage | 12 volts |
S**E
Servo arm
Great works as expected
G**G
MUST READ!!!
So a lot of people believe these come with โbad threadsโ and they must force their oem screw into them or re-tap the threads to 3mm. The issue is not the threads, itโs the fact this is threaded SAE and not MM. Instead of tapping the threads just go and get you some standard 4-40 screws in either a 1/2โ or 3/4โ length and they go in perfect. Donโt forget you need a 4-40 locking nut to go with it. Hope this helps!
U**R
Good throttle servo horn
Bought it for my steering servo but it turns out this one is too short and doesn't have enough throw. It works great as a throttle horn though and they also make one specific for steering thats longer and works great
J**W
I expected m3 screw size threading
It works great and was a direct fit for my Traxxas slash 4x4 in size. However, I ignorantly assumed it would take ana m3 screw. I had to buy a Tap and Dye set, still something worth having so anyone in that situation take note. You could very slightly drill the hole out and force tread a stainless steel m3 screw through the aluminum part but I would strongly recommend against this procedure. I just know it's possible.
J**G
Main Gotcha - the ball threads are not metric!! Otherwise, amazing!!
Race a couple TLR 22 5.0 buggies. Have a spectrum servo in one with a 23t and this one with a 25t. Regardless, the hole is drilled and tapped for a SAE ball joint. I tapped them with a 3mm tap and ran the ball ends into them - a little locktite and small nut on the back. EZPZ
M**Y
Easy to install
Great product
W**.
Works great looks great ๐
Very strong looks great
M**T
Works fine once you run a tap through it.
As other reviewers have stated this horn really needs a tap run through it to clean out the threads, which is a little obnoxious. Itโs not a big deal and you could likely use a sacrificial bolt or two with some oil instead of a tap, but still seems like the quality should be better for a Losi part. Works well on my Tenacity DB Pro with Savox servo, but I doubt Iโll buy another one.
N**O
Nice.
Works as it should.
S**O
Top quality
Product as described.
A**A
El material perfecto
Me parece muy bien construido, no tuve problemas para acoplarlo a mi servo de direccion, y al ser de aluminio da una mayor resistencia al impacto, y si lo combinas con un servo de centro metalico, sera practicamente indestructible!
D**B
Good quality, short servo horn with a bit of offset - either tap to M3 or use a 2.5mm bolt
I bought this for my Rock Rey, and when I sold it as a roller I kept the horn with the servo. I did not notice until I went to use it on an SCX10ii based build that the hole for the drag link was actually tapped at either 2.5mm or 2.6mm. Most servo horns are tapped at 3mm. I see a lot of reviewers complaining that the horn was "improperly tapped" or "threads were bad". I disagree. I had no issue bolting on the Rock Rey's steering link, and I am guessing that at least some Losi vehicles must use a 2.5 or 2.6 as a standard horn screw size. When it came to bolting on the 10.2's drag link I just took an M3 tap and a bit of oil and tapped the hole out to the standard 3mm. The horn is tough enough, shorter than most of the cheap aluminum horns on the market, and comes with a small offset which can be quite useful in some builds.
J**V
Excellent Servo Arm!
Beautifully machined, nice gun metal finish. Strong but very light. You can mount your ball stud to the front or back of the servo arm for more options when setting up your links. ๐
Trustpilot
2 months ago
3 days ago