Guyker Guitar Locking Tuners (3L + 3R Handed) - 1:18 Lock String Tuning Key Pegs Machine Head with Hexagonal Handle Replacement for ST TL SG LP Style Electric, Folk or Acoustic Guitars - Black

Fantastic tuners. I use them on every guitar I upgrade because the quality is always spot on, they never have sharp locking pins so never broken a string (unlike some other brands). Consistent feel and they look great. I’ve used both chrome and black and the quality and fit is always first rate. They definitely bring stability to any guitar they are put on.

Cant fault.. fit well, nice and tight when tuning no unwanted movement, look great

Ok, so if you're tuner hunting like I was you really only want to know the following things... So here we go! 1. They look great. They're excellently machined with a rich gold finish and they look and feel premium (just as nice as the official Fender tuners on my Strat... At half the price). 2. They work! So easy to change it strings, stable tuning and they don't drift. 3. Fit requires a small, easy adjustment for My Bonanassa Custom ... So probably most LPs. They're a shade too narrow on the collars (but this allows a greater variety of instruments to use them... Better than too wide!). All you need to do is get some some tape (I used scotch tape). Cut around 6cm of tape and slice it down the middle, length ways This makes a perfect width to tightly wrap around the collars, creating a shim (expanding the width). They will now seat in the headstock snuggly. With that done, line the tuners up parallel (just eyeball it). 4. The screws! As you can see the fixings are 45° not right under the tuner. For me, this was just fine as my original screws were spinning from re-tightening over the last 20 years. 5. You don't need a drill to fit! Before you take a drill to your axe... Read the following! Firstly, line them up. Next, you'll need a fine center punch tool and a hammer (the ones you tap into wood to start a drill hole). Line the centre punch up with the screw hole and GENTLY tap the punch into the headstock. ROTATE it as you gently remove it (don't wiggle it out ... You'll risk splitting the wood). Pop the screw in the starter hole and slowly and carefully screw it in. If it doesn't want to go in... Use the center punch again gently. Using this method I achieved a perfect fit for all screws in less than 2 minutes... Without using a drill. They now look amazing. I'll not fill in the original screw holes in case I ever want to reinstall my Grovers (unlikely as, unexpectedly, these are better). The guitar now feels stunning to play. String bends don't drift the G string and it's weirdly quicker to tune... And rock solid tuning stability once in. Many negative reviews for off-brand guitar parts are a result of a lack of ability to make simple adjustments. There is always size variance between models and brands of guitar...a bit of common sense, some basic tools and sticky tape can save you a fortune. My advice would be to buy these and follow these simple instructions ... Rather than spanking nearly £200 on Grovers. I hope this answered the questions I needed to know when I was browsing! Rock on!

These arrived very promptly. I had an issue with one of the tuners, the collar wouldn’t tighten down far enough against the headstock. After contacting Guyker they sent a new one free of charge; that’s now fitted and working fine. Great customer service! I would say they’re not quite as good as really high quality (and expensive) locking tuners, but they do a really good job, look great and hold tune well. If they were twice the price, I don’t think anyone could tell, they’re well made and finished. The only one very small issue I had was that on a very light string, I tightened it a bit too much and broke the surplus string off. This wasn’t an issue since the remainder of the string held tight in the tuner; not sure if more expensive tuners would do the same when over tightened. (I’ve since learned that you shouldn’t and don’t need to tighten these down hard.) If you can, and want to spend more for Graphtech or Fender locking tuners, you potentially should, but these make an excellent alternative that don’t disappoint. Good value for money, hence five stars.

Look good and are decent quality. Knocked a star off because one tuner was stiff took a bit of use to loosen up.

Love these tuners. They are locking tuners so make sure to twist the flat panel at the back if you have never used them before you put your strings on. They look great, feel great, hold tune well. Nice and easy to setup and instal. Can never go wrong with Guyker tuners.

As always Guyker are quality for their price. This is the 3rd guitar that I ha e put Guyker tuners on and I have had no issues. Feel good and looks great. Very easy to fit to my Jet JS-400.

It has to be said these are very attractive tuners and they really made my 30 year old Fender acoustic pop. But I didn't purchase them just for the eye candy. My original cheap factory fitted tuners have always been problematic, but I learned to live with them, making minor repairs over the years. It was a gift from my wife when we first met and even though it now has several partners, this guitar still holds sentimental value and it is my practice instrument. More recently it has failed to hold tuning and it was time to replace them. The Guyker tuners were easier to install than I had expected. There was no drilling, just a need to make sure they are levelled correctly. Fitting strings, wow I love the locking mechanism. No more Luthiers knot!! But what surprised me the most was the cleaner and brighter tone of the strings (I had kept the old ones on to get a comparison of the tuners). It was as if I had put on new strings. To be honest I was actually taken aback. It was completely unexpected. I can only think that my old tuners must have had an almost imperceptible rattle or distortion and deadening of the strings that I had accepted as normal for this guitar. It lives again!! Oh and as for what I purchased the tuners for; tuning and stability is a huge improvement. I should have done this years ago.

Excelente opción para un upgrade

Me gustaron aunque para modelos GRX IBANEZ queda algo pequeño hay que calar al tamaño y no cualquiera puede hacerlo por favor acercarse a un laudero de confianza para que haga este trabajo porque quedaría milimétrica mente mal y eso podría afectar la entonación y octavacion del producto final, aún así es un excelente producto muy profesional y de excelente material, si pueden agreguen un poco de grasa de litio en el engranaje para evitar corrupción por el óxido y muchas gracias por el tiempo de entrega súper rápido 🙇‍♂️ saludos.

Einfach genial! Super Optik! Und hält die Stimmung sogar nach Transport! Perfekt nur zu empfehlen

Bonne qualité, tête de mécaniques plus petites que ce qu'on voit habituellement (ce qui rend très bien sur une tête de manche PRS.

Avevo preso degli autobloccanti della Musiclily ma perdevo in continuo l'accordatura perchè le viti di serraggio non trattenevano bene le corde, specialmente se usavo il tremolo. Ho reso e poi deciso di provare questi Guyker, che costano solo qualche euro in più degli altri. Diaciamo che sono un po' più carini e meno grossi. Già a prima vista si nota la differenza in qualità ed in ogni caso sono ben assemblati e non presentano gioco o difetti. Montati senza nessun problema, vanno bene e fanno il loro dovere egregiamente. Per ora devo dire che sono molto precisi e permettono micro regolazioni tali da avere un buon tuning. Sono molto soddisfatto visto il prezzo.