HUANUO 13 to 40 Inch Dual Monitor Arm for 2 Ultrawide Screens, Height Adjustable Full Motion Stand with 2 USB Port, VESA 75/100mm Mount, Holds up to 26.4lbs per Arm, Black

المنتج رائع و عملي جداً ذو جودة عالية

It's perfect in terms of functionality and setup. it may only improve the plastic material and type of steal to look more rich material !

Leicht zu montieren und durch die Druckgasfedertechnik lassen sich die Monitore spielend leicht nach Wunsch verstellen! Super Konstruktion!

Set up in about an hour, no major issues except the USB cables don't seem to fit as shown in the instruction but as I wasn't using them it didn't cause me any problem. The arms and desk C clamp hold the monitors very securely, move freely and feel very solid. My only concern was that I had to tighten the bracket plate holding the monitor vertical to the absolute limit to prevent my main monitor 'drooping' even though it is weighs 20% less than the limit given.

I have the single arm widescreen for my wife and the double arm widescreen for myself. These are great. There are a few caveats. If you want two 35" side by side, it might be a tight fit, they may not fit if you want them high up.... for ultrawides definitely going to be pushing it. I have a 35" ultrawide and a 27" normal aspect ratio monitor and I can fit them side by side if they are adjusted a bit lower than I want them. At the height I want them (eye level, I am a 6'4 man though) I use the widescreen horizontal and the turn the normal AR screen vertical and I game on the widescreen and use the vertical one for webpages/etc while gaming. as you can see from my picture i can probably get more wiggle room by moving the mount over to the right further and extending the widescreen further out. but I don't still dont think it would be enough for a horizontal side by side without dropping the height a little. which if I really cared I would do, but I'd prefer to have them eye level in this configuration. They work for my needs but any larger and I would have to move the arms down to have them side by side even with one vertical. How well will two normal AR 35" screens fit side by side? I'm not sure I think they will fit but you may need to lower them a bit below eye level. actually another user with what a picture of what looks like fairly large wide screen monitors side by side but as you can see from his picture the monitors are only like an inch or two off the desk. as a 6'5 man with a relatively low desk it takes up a lot of length just getting them to my eye level. That's fine though I don't mind having one vertical. these are the best ive seen that weren't several times the price level. If these wont work for you nothing reasonably priced will (at the time of this review). That said these are the most accommodating and best well built gas spring dual arms I've used. If you really want two screens horizontal side by side and your use case is bigger than you think will work, you may want to consider putting them on individual arms instead so you can space them further apart. That said, these arms are very good build quality. the gas spring in them is powerful, I have my wife's older pretty heavy dell ultrawide on a single arm one and it lifts it with ease w/out being topped out on the adjustment. You will have to push the arm down to the desk all the way to find the adjustment for the spring. I think a lot of people don't realize this and think it's not up to lifting their monitor because you can tighten it up some out of the box for heavier monitors. The arm should be able to accommodate any modern monitor given how light they've gotten and some pretty heavy older ones. all the adjustments are smooth and easy to do, the least smooth adjustment is the vertical tilt that happens right behind where the vesa bracket is, but its still pretty decent. the swivel and height of the gas spring are effortless. it looks nice, it feels heavy and durable. I'm an i.t. guy and ive used a lot of monitor mounts and these are well above average quality. Just need to decide if you want a double mount or two singles for your needs. id not recommend anything cheaper or anything pricier. this brands higher model/widescreen ones are the ones you want price/performance they are the sweet spot

So many VESA mounts on this website claim support for 32"+ monitors with weights up to 12kg, and the majority of them just don't even come close. I tried both of ErGear's offerings and they entirely failed, stemming from their very cheap-feeling construction. Figured I'd spend a little more and give this HUANUO arm a try, and hey, it actually works. It is solid metal throughout - the base is extremely steady, and the arms are very robust. The best part's the tilt mechanism that absolutely won't give whatsoever when fully tightened, which is great for my monitor that's quite bottom-heavy. The USB extenders built into the base are a great addition, and work wonderfully for discrete receivers if you have wireless peripherals. Can't fault it!

I was sort of skeptical about how this product would work - I am unfortunately one of those people who equate $$$ = Product Quality (Trying to break that mindset). Once I received the product in the mail, I was relieved to see how sturdy and sleek it looked. Assembly, as a few other pointed out, were difficult and the instructions were vague and not completely clear to understand - After step 1, the rest of assembly was not overly strenuous or complicated. Once assembled and positioned in place, my monitors were upright and not sagging! It was so easy to maneuver and make the slightest of adjustments - This has helped with my neck tension as I did not have my monitors at eye sight level - They also raised my monitors which has the worst placed VESA mount ever..... at the very top.... so essentially any monitor stand I have, my monitors still "drag" against the desk, but not with this mount!!! This was absolutely worth the price and quality is great - I do have to give a little knock against it.. The "pads" don't really work and it did scratch my desk quite a bit (Wood) however, where I positioned it, you won't see it - but if and ever I remove the stand the desk is sort of mangled; I wished I had put my own padding down.