cleaning fluid for Epson, Brother, Canon, HP inkjet printers 17oz 500ml

Took two applications but it cleaned up my problem. Waiting about 30 minutes after injecting the fluid made all the difference.

Good

Best head cleaner I have used for DTF. I fill the cap and microwave it for 15 seconds or until the solution bubbles and then poor it into the capping station let the heads soak for 20 minutes. It works great.

Does a very good job.

This stuff really works. I have a Cannon MG6200 and the jets got clogged from not printing for a long time. I took out the head and cleaned it with the Hospital liquid as instructed and now I have a like new Cannon.

I kept using this but it ended up not keeping my printhead unclogged nor did it unclog it as well. I dont recommend for DTF printers. It ruined my printhead and my motherboard. Will not order again.

I have a Canon Pro-100 inkjet printer that I did not use for about a year. After head cleaning with the Canon printer maintenance software 2 print heads refused to open up. Looked online and fount this as the top rated product. I filled a small tub with about 1/2-1/2 inch of the product and left it to sit over night. Liquid became ink filled so I did it again. Again ink filled color. Emptied it again and filled the tub the same with distilled water and left it sit, did this twice. Last tub with product in it again. Left it in the sun for about one hour and put it in the printer with new ink. Ran a print head check and they work. Some on asked what are the ingredients? Well it's not listed but smells strongly of ammonia. Bottom line is it worked 100% and after I ordered this I shopped new print heads $500. The I looked up new printers. You can't really get new printers. Most are discontinued. So if this didn't work I was in a jam. Word to the wise use your ink jet printer at lease once a month. "Alexa remind me to use the printer".

Have used this in the past and had great luck cleaning the print head of my old faithful Epson Stylus Photo 1400. They were really "gummed up" and it took a lot of patience to run cleaner through them at least three times..This happens when you haven't used the printer for an extensive period of time.(My Epson 1400 lay unused for 2+ years.) Or, have used the printer so much that ink gums up just from so much use. Set up over a large "pan" for over flow Don't do this in your living room or your rug may become a mess! Use lots of newspaper and those super absorbent towels that come in large multipacks. Use in a well ventilated room and wear protective non absorbing gloves. This may take two or three runs (cleanings) before it does the job, but it does work. When I was through the printer was like a new machine. My recent cleaning was so much easier since I use the printer quite frequently nowadays. It's worth the money, but check to see if it will affect your printer's warranty and if it should be used on your printer before buying the stuff and cleaning it. Good luck!

Used to clean heads on Epson XP 960 printer. Worked well after multiple applications.

Some years ago I bought a printhead cleaning kit from Printhead Hospital. It did the job admirably. I had a recent printer issue, but had run out of fluid. Naturally, I purchased from Printhead Hospital. The fluid arrived quickly and did the job of cleaning off a lot of ink very well indeed.

J'avais vidé un kit de nettoyage pour mon imprimante Canon Pixma MG7150; je l'ai rempli avec ce liquide de nettoyage et ai fait une demi-douzaine de cycles de nettoyage de l'imprimante; résultat: les lettres noires bavent deux lignes sur trois. Du coup j'ai sorti la tête de l'impression de l'imprimante: il y avait de l'encre stagnante à la sortie des têtes, je l'ai mise à tremper dans l'eau avec quelques gouttes de ce liquide sur les éponges de réception des cartouches. Après vérification de la propreté de la tête, remontage et impression d'une soixantaine de feuilles ,le problème persiste: cela bave. Du coup j'ai redémonté, dévissé l'intérieur de la tête pour voir: pas de fuite visible. Est-ce qu'il y avait un résidu de liquide et que ce liquide est mouillant? Est-ce que le liquide a bouffé les têtes? Mystère. Moralité: avec un bon tutoriel sur youtube le démontage de la tête d'impression est facile et souhaitable: rien de mieux que regarder de près. Le nettoyage à l'eau est inoffensif et a des chances d'être suffisant. Question: quel est ce liquide vendu 20€ le demi-litre? Du white spirit, de l'acétone? Mystère. Bonne chance.

This is my secont container. It cleans the printheads very effectively.

It does what it says on the tin.