CAR-REP® 2K Polyurethane Clear Coat with Wise 2K Technology, High Gloss, Easy Application, Unlimted Pot Life, 11oz Aerosol Can

This Clear Coat is Amazing! I watched a few videos and a number of them recommended this clear coat and now that I've used it, I recommend it too. I have a 2014 Honda CRV with 203K miles and the pain was look pretty bad especially on the hood. I did some light sanding, cleaned the surfaces and then applied the coating. It is so easy to use - hold it about 2-3 inches from the surface and move quickly and smoothly it gives a nice clear seal. I am extremely happy with the results. And you can put on a more than one layer. Great value too, if you have the time to do it yourself. And, many videos said I had to remove all that white spaul around the worn areas. In some cases I could not sand it out and this product covered it 95% or better. Dries very quickly. Nice and shiny. and seems as durable as the original coating. If you've got an older vehicle and don't want to pay a ton to get the paint in shape so it does rust or further deteriorate, give this a try. Pro tip - get a tack cloth and once you're done with sanding and cleaning the are you plan to coat, give it a good going over with a tack cloth. My first time to use one, but what a difference in "cleaning" the surface.

UPDATE: downgraded to 1 star. I've gone through 2 cans of this product now. Pros: easy to use, good coverage, good flow, extended pot life in can. Cons: shrinks back more than expected, may (WILL) crack like old lacquer, somewhat temp and humidity dependent. I (was) thrilled with the long-term pot life of a 2K in a can. I had used a single can on various events over the course of 3 months. As long as the cap is cleared after use, it will keep working until gone. The downside IS surface failure. I've had 2 parts develop surface (clear) cracking after extended dry time (approximately 3+ weeks.). The finish looked great initially, then over an extended time it appeared to shrink and crack. This reminded me of old lacquer = not desirable. (UPDATE: all items this product was applied to now are showing finish failure, up to 10 months after application at this time.) Month's later, every item I had used this product on has had "cracking" appear. Doesn't matter if only 2 coats, or up to 4 coats were applied. Fine aged lacquer style cracking has appeared. $25 per can has now cost me hundreds in return repair work. Chalk it up to wanting an easy product. It is so strange, there isn't an adhesion issue, as the clear is stuck to the surface, but the clear appears to be a brittle surface. Possibly it can't withstand temperature changes, IDK. I really question if this is a true 2K urethane. I'm not a chemical engineer, but it is unlike all other catalyzed urethanes I continue to use. Maybe I got a couple bad cans form a bad formula batch, idk. Makes me sick thinking about this stuff. I wish it were as good as the marketing presents, but it's not working for me.

Shake well for sure. For better depth, sand with 800 after the second coat. Do not build up over three coats without sanding, works well with water resistance and slight scratches. Super fine spray. For the money this is a less expensive top coat that is close to a two part K1 automotive clear coat. I would not advise using it on big projects. Super quick drying time.

EXCELLENT clear coat. Vastly superior to the stuff from out parts. It's the real deal.

Stellar performance…quality product…

Cans both immediately clogged and won’t spray. Tried holding upside down, new nozzles, nothing worked. Waste of $60+

This was the best clear coating I have ever used, and the fact that it can be used more than once is a game changer.

I've been spraying base/clear custom paint jobs for over twenty-five years. I purchased this product with hopes of using it as convenient alternative for having to mix 2K clears and cleaning up my professional spray equipment for small jobs. I tried this product out on a test sample (photo attached) I had properly prepared and base coated Per the instructions on the can, I shook it for three minutes and sprayed the CAR-REP 2K clear onto my test sample in my usual dust free space. Tiny bits of particulate spit from inside the can onto the sample even after a couple of clearing passes aimed well aside of the work. This is a deal killer for me given the whole point was to save myself some time and effort on small jobs. If I'm going to have to buff the clear out anyway, this negates the convenience of using a rattle can. Perhaps I just got a bad one and this isn't typical. Some good things about this product is it reportedly has many of the properties of the two component poly clears without the limited user time once they've been mixed. It also dries to the touch with a wet looking high gloss luster in 20 minutes--specks and all. In summary, I'll use the balance of the can I received (late by the way) to clear coat and protect some things I don't care as much about achieving a flawless base/clear finish on. With some polishing after it's fully cured, I'm sure this clear would render a pretty decent finish however.