15W LED Driver, 12V DC 1.25A Output, IP67, 100-240V AC, 2-Pack

Bought for running some Tapo security cameras. These small transformers fit nicely in a waterproof junction box mounted to the wall.Simple wago connections can be used to connect the wires and they have worked faultlessly for over 6 months now.

These compact LED drivers/transformers seem ideal to convert a halogen "Serious Readers" ASK lamp to accommodate a low energy LED bulb. It will operate on the foot switch, not the small black switch at the top. To change over, simply unscrew the base (4 screws with rubber feet), and remove the existing transformer in the base of the lamp, disconnecting it from the connectors. The new driver's wires simply go into the existing connectors: The 12v red and black output wires connect to the two silver wires that go up the stem of the lamp - I put the red live on the end. (The other two existing black wires in that connector can be left securely fastened and blank.) The 240v input of course goes into the connector with the mains cable, brown to brown, and blue to blue. Leave the earth cables as they are. Check all your cables are secure. Push the new transformer up into the base, just like the old one was, with the two connectors either side, to stay separate. Put the base back on, and that's it! (The bulb is size MR16, and you ideally need a 4w lamp, equivalent to an old 40w bulb, and warm ish at 3000 (or 4000) temp, with CRI 80+.)

Used a couple of these to replace some 20-60w halogen transformers inside some wall lights as the 3x 2w bulbs were flickering and making a horrible noise. Nice and small, was simple to replace but the lights now have a delay between turning on and off. Not the end of the world for me but something to bear in mind.

I used this for hard-wiring in an Aqara video doorbell. Not much to say except it worked flawlessly, and was able to fit into a back-box the other side of the wall. Been running fine for several months now, would recommend.

Perfect, my LED is working again.

Bought 5 x 2w led bulbs to replace 5 x 20w halogen bulbs in a ceiling lights. Lights would cut out after a few minutes due to transformer being over powered. (105w). Bought these to replace the existing transformers. Simple swap out and lights work perfect now.

Very Good Driver

Item faulty - fit it then it tripped the switch (was installed professionally)

Parfait pour ma bricole (alimentation d'un relais 12v)

Bought to connect directly the WiFi directly to the hard wiring in the junction box and it works.

Alimentation ampoule piscine

Valde pga storleken

Hade halogenlampor som ständigt gick sönder. Tröttande och köpte dessa samt motsvarande ledlampor.Fungerade smärtfritt att byta och är väldigt nöjd