Krieger Dual Monitor Mount with Stand, VESA Mount Compatible, Computer Monitor Stand Fits Up to 13" to 27" LCD 17.6 lbs Each, Computer Monitor Mount 45° Adjustable Tilt, 180° Swivel & 360° Rotation

I was very surprised by the weight and quality of this quad monitor mount! It’s SOLID, comes with everything you need, easy to assemble, and works perfectly.I was worried about some of the reviews mentioning that the monitors shake easily - this does occur a little bit, but I’m noticing my desk is pretty cheap and when the desk shifts back and forth a little bit, you can notice it in the monitors. When I put the stand on the floor and walk around it, no shaking appears to occur (haha extreme testing?)The only thing that I wish was that we didn’t need an Allen key to adjust the monitor HEIGHT (it’s provided with this kit, and everything else is fully adjustable without it).Just a heads up - I went from a two monitor stand (similar setup to this one with a Versa mount) and was getting frustrated because I couldn’t get the screen to slide on the mount.... should be common sense to use the mount that came with the kit - but I completely forgot that I hadn’t switched it and it caused frustration until I realized the identical mounts aren’t universal. Long story short, just use all of the hardware they give you haha.

I bought this to go with my two new 27" AOC monitors and must say that I am thoroughly impressed with this purchase. This thing is heavy duty and has zero problems holding both 27" monitors, and will angle both monitors in for easy viewing. I have tested balance and can have both monitors turned anyway you want except backwards of course. Many adjustments and monitors line up perfectly. You can also have one or both monitors in portrait position with no issues. Very good buy, I got this on sale for $39.99, and would recommend to anyone using a 2 monitor setup. Also cannot forget how easy this thing was to put together, even has a holder for the 2 hex head wrenches on the main arm for quick adjustments.

I had concerns about the "stand" this uses, rather than being clamped onto the desk, but my concerns were unfounded. It has two 32" monitors on the bottom and 27" on the top and it isn't even a little bit rickety. It also allows me to position all three monitors in such a way that I can see exactly what I want.I went through two other "hydraulic arm" type monitor stands before I found this one and I wish I had tried this one first. This is perfect for a three monitor setup.

Pros: Heavy Duty, Very Stable, Holds my 2 (27" 'very heavy monitors') in place without budging, Monitors will move without falling down, good cable management system.Cons: Large Foot, Takes up desk space.We generally get these types of products to save desk space and for looks or to replace poor monitor mounts that come stock with the panels. However, it should be noted this foot on the stand is quite large even on my fairly large IKEA desk. If you are looking for this product to safe you desk space, I'd recommend going with a clamp if your desk has a lip. This does end up saving some space but not as much as I hoped, on the flip side, I'm not going to complain because this thing is stable, it'll hold my 27'' monitors in any position. I've had other brands in the past, but nothing matches the pure mass of this beast.Note: If you are using this in combination with a gaming 'desk' mat, you need to place the stand on top of your mat to fit it in the correct position. I had to do this but it did not take away from stability of monitors and I was able to easily adjust for the slight slant in the monitors by moving the arms and rotating the swivel mount. It's all black so it goes together quite nicely.

This stand works great and is easy to set up. It supports both standerd types of monitors mounts and could be easy adapted to fit other things. The build quality is really good so I’m not worried about this thing ever failing. My one gripe is that the base is slightly larger then it probably needs to be, but this makes it very stable so it’s not really much of a gripe.I would recommend this stand to anyone who wants to clean up a dual monitor setup.Thanks for reading my review, if you found it helpful please give it a thumbs up.

Product appears to be good once I finally got it set up, but it was time consuming to get them to work for me. I have two 27" ASUS Monitors. I bought them new when I purchased this stand to replace my former setup of 21" monitors on a stand-- ie they are not bulky or heavy monitors. I tightened the bolt as much as possible with the provided allen wrench, but every time I placed my monitors on the stand, they pivoted down face flat.I reached out to Customer Service and sent them pictures, to which they said everything looked fine. I looked at my old monitor stand and the hardware setup was a bit better, as it allowed you to use a wrench/ ratchet to get the hardware tightened, rather than just an Allen wrench. After looking at the way my old stand was set up, I decided to flip around the washers so that they would take up more space and allow greater tightening. I had to use my personal allen wrench, which has more leverage, and I FINALLY was able to get them tightened up enough to hold the monitor enough to stay in place. I'm still nervous about touching or adjusting them, as I fear that the slightest touch will loosen it up. I'm not sure why I had such an issue. If I had not let the stand sit in the box for over a month, I would have just returned it, as it was definitely not worth the hours I spent trying to get it tight enough to hold up my monitors. It finally involved a little ingenuity on my part to come up with a solution, as the way it came out of the box was not working and I was tired of seeing the stand collect dust in the corner of my office.However, it does seem to be filling its role of freeing up a little space on my desk and allowing me to elevate my monitors above the standard height-- it was just a pain to get there. It provides a lot of adjustment options to get your monitors set up at the angle you want, etc. Those reasons are why I did not give it a 1 star.

I was intrigued with this style of set up for my monitors as I am used to the traditional wide side by side by side 3 monitor set up. This product style (Christmas tree i call it) would allow me to simply look up to see my third screen instead of turning my head.Some shortfalls of this product that could be easily improved:1- It needs a vice grip like desk mount so the monitor stand can be fixed to the desk. The stand that is included allows for too much movement.2 - the Heightest position of the 2 main screens is to low for me. I am six ft tall. and I would like it if the two main screens were about 4-6inches taller so they are central to my field of view. I have to lower my chair to compensate for this. This could be easily fixed if the bar on the back did not have a stopper on it. with a single bar, the user would be able to have full control over the placement of the monitors for their size etc.Anyway I still use it but would expect a 2.0 version to have these modifications

El artículo llegó con piezas plásticas rotas. Demasiado complicado desarmarlo para devolverlo.

Estoy muy sorprendido con este soporte. Aparte de ser un precio muy razonable es un soporte de una calidad muy superior a lo que esperaba, duro, resistente y que puede cargar facilmente monitores pesados. El montaje fue muy rapido, es sencillo y no hay demasiadas piezas (a pesar de lo que pueda parecer por la inmensa coleccion de tornillos que trae).Yo ahora mismo lo uso con tres monitores mientras el cuarto no me llega, pero vamos, que puede con ellos sin problema ninguno y con una estabilidad flipante. Muy buen trabajo Krieger!

Does not align

Great product, have purchased quite a number of these stands for myself and colleagues. Easy to assemble and sturdy build.